Neu

1:10 RC Fighter Buggy RX Memorial DT-01

1996 was het jaar waarin de Fighter Buggy RX voor het eerst verscheen, en hij speelde een grote rol in de Duitse "Fighter Cup" -serie, die ook in hetzelfde jaar begon en in 2021 zijn 25-jarig jubileum viert. Om dit te vieren, brengen we deze special uit. Herdenkingseditie van de kit, gebaseerd op het betrouwbare DT-01 chassis.

Dit is een 1/10 schaal R / C-modelbouwkit.
- Lengte: 390 mm, breedte: 236 mm, hoogte: 138 mm.
- Beschikt over een stijlvolle, gegoten plastic buggybody en geïntegreerde vleugel, inclusief onderdelen om een bestuurdersfiguur te creëren.
- Het chassis van de DT-01 biedt bewezen offroad-prestaties, ondersteund door achterwaarts rollen stijve asophanging met een afgedichte tandwielkast en differentieel voor soepel vermogen en bochten. De voorkant van het model heeft een schommelasopstelling voor een ruime slag.
- Duurzame ABS-kunststof wielen worden gecombineerd met geribbelde voor- en achterbanden met spikes.
- CVA-oliedempers zorgen voor een superieure demping.

Tamiya nummer: 47460

EAN nummer: 4950344474608

1/10 DT02 2WD Holiday Buggy

Het Holiday Buggy is nu gemonteerd op het DT -02 chassis dat zijn accu in het midden van het frame heeft en uitstekend handelbaar is, zelfs op het ruwe terrein.

Bij het installeren van een grootte motor , zoals een 540, zijn de volgende onderdelen vereist:

17T Pinion Gear (3515005)
3mm stifttap ( 50576 )
Motor Plate (4305125)

1/10 R/C bouwkit van de Holiday Buggy .
Voor-en achterbanden spike zoals het origineel.
Nieuw ontworpen full-body stickervel.
Blauw gekleurde duurzaam polyethyleen (PE ) body .
Komt gemonteerd op de 2WD DT -02 chassis.
Voorgeschilderd piloot inbegrepen.
Lengte : 390mm
Breedte: 240 mm
Hoogte: 164mm
Wielbasis : 260mm
Bodemvrijheid : 26mm
Gewicht: 1250g
Type 380 Motor Inclusief
Achterwielaandrijving 2WD
Breedte van de band / Diameter: F = R = 22/81mm 39/86mm
Loopvlak : F / R = 217mm/208mm
3- Bevel Differentieel tandwielen
2-delige stuurstangen
F / R dubbele wishbone schokdemper
Gear Ratio = 15.77:1

Tamiya nummer: 548470

EAN: 4950344584703

HUDY PREMIUM SILICONE OIL 675 cSt - 100ML - 106368

Hudy Premium Silicone Oil 12 000 Cst - 100ml

Woodtrick Truck

Wees koning op de weg met deze vrachtauto! Hij is een toonbeeld van de wonderen van ingenieurswerk om een machine te bouwen die sterk genoeg is om zware vracht te vervoeren en te slepen. Laat je kind geïnspireerd raken en zijn eigen Wood Trick-modelvrachtauto bouwen. Hoewel hij een stuk lichter is dan een echte vrachtauto, zitten er maar liefst 215 stuks in deze set. De set heeft een gemiddelde moeilijkheidsgraad.

De houten 3D-modellen van Wood Trick zijn perfect en mooi om in huis uit te stallen. Ze zijn duurzaam en hebben zeer populaire ontwerpen. Elk model is uniek en trekt de aandacht van je gasten. De set wordt geleverd met duidelijke, eenvoudige en zeer gedetailleerde instructies en illustraties. Je hoeft alleen maar deze instructies te volgen om de set snel en correct te bouwen. Je hebt zelfs geen lijm nodig om alle stukjes aan elkaar vast te maken. Breng de hele familie bij elkaar om de set te bouwen en er daarna mee te spelen. Door deze sets te bouwen wordt het vermogen van je kind om zijn eigen structuur of voertuig te plannen en te bouwen als een echte architect of ingenieur gestimuleerd. Met behulp van veilig en milieuvriendelijk hout van natuurlijke bomen zonder toegevoegde gifstoffen of lijmen, kun je je set bouwen en met trots tentoonstellen in je kamer! Zelfs kleine kinderen kunnen veilig spelen met Wood Trick-sets zonder bang te zijn voor blootstelling aan schadelijke chemicaliën of kleurstoffen, hoewel we ouderlijk toezicht aanbevelen wanneer kleine kinderen bouwen en spelen.

Kenmerken:
– Geen lijm nodig
– 215 onderdelen
– Aanbevolen leeftijd: 14 jaar of ouder
– Moeilijkheidsgraad: Moeilijk
– Montagetijd: +/- 2.5 uur
– Inclusief: gedetailleerde handleiding met illustraties

Productinformatie:
– Product: Woodtrick Houten Modelbouw – Vrachtauto
– Materiaal: Eco-vriendelijk multiplex
– Afmetingen: L 11 x B 24.5 x H 10.5 cm
– Kleur: Natuurlijk hout
– Verpakking: Cadeau verpakking
– Afmetingen verpakking: L 37 x B 18.5 x H 3.5 cm
– Gewicht verpakking: 601 gram
– Merk: Wood Trick

Artikelnummer: WTR00003

EAN: 4820195190036

LRP Double-charging Lead - 4mm/5mm 2s Lipo Hardcase Incl. Ehr Balancing Adapter

Xray Hudy Alu Ultra-light Pinion Gear - Hard Coated - 45t / 64

Proline Big Daddy Wide Drag Slick Sc 2.2/3.0 Mc (clay) Drag Racing Tires (2) For Sc Trucks Rear

Hudy Wheel Balancing Putty

Proline Caliber 2.2 M4 (super Soft) Off-road Buggy Rear Tires For 2.2" 1:10 Rear Buggy Wheels

Proline Trencher Sc 2.2"/3.0" M2 (medium) Tires

Suspension Mount Shim Set 0,2/0,3mm (10)

Speed up your pit work with these handy U-shaped shims, which promise faster, hassle free suspension setup changes.

Item Contents/Information:
- 0.2mm Shims x10
- 0.3mm Shims x10
- U-shaped shims can be inserted without the need to remove the mount screws, speeding up your adjustments.
- Use different thicknesses of shim to fine-tune your suspension to perfection

TC-01 Carbon Battery Holders

Item Contents/Information:
- TC-01 Carbon Battery Holders x2
- Used in place of kit-standard plastic A11 parts, these 3mm thickness carbon fiber components are a rigid and lightweight (3.6g for one set) option.
- Removal of a pin is all that is required to release the battery pack.
- Compatible with TC-01 chassis cars.

This is an aluminum spur gear holder for the TC-01/TB-05 chassis. It replaces the kit standard stamped steel part for increased rigidity and a lighter weight model.

• TC-01/TB-05 Aluminum Spur Gear Holder x1
• This lightweight (2.6g) aluminum component can be used in place of the kit-standard steel part (7.1g) for a weight savings of approximately 4.5 grams.
• Hard-anodized coating for increased durability.
• Compatible with TC-01 and TB-05 PRO chassis cars.

This is a lightweight version of the standard body parts set of the popular electric powered Raikiri GT model (Item 58626). Made from 0.8mm polycarbonate as opposed to the standard 1.0mm, it will give your R/C racing car model a lower center of gravity, thereby improving its performance.

• 0.8mm thickness polycarbonate.
• 0.8mm thickness Racing Wing α parts (Item 54457) are included, with stay mounts allowing different setups.
• Marking stickers, plus masking stickers for use when painting are included.
• Compatible with 257mm wheelbase R/C touring car chassis.

Ball-End Adjusters are used in partnership with threaded shafts to allow swift and convenient adjustment of a range of components on R/C models. Tamiya’s classic design ball-end adjusters have been updated with this new design consisting of an open-face, which are open on both sides of the connector to allow easier access when working on your model. Their design and reinforced material give improved durability. 2 sizes are available!

• Open Face 5mm Reinforced Adjusters (Long) x8
• Length: 15mm
• May require filing down when used on some models.

This useful crossmember piece is crafted from carbon fiber material. It will reduce “wobble” experienced in the rear body mount pieces, which helps keep your car more stable through corners.

• Carbon Body Mount Crossmember (Rear) x1
• O-Rings x2
• 6mm Snap Pins x4
• Two-hole positions allow you to use this item on both TRF419 wide post set ups, and narrower TA, TB and FF chassis machines post set ups.
• Compatible with TC-01, TA07, TB-04, FF-03, TRF419 chassis.

Tune up your TB-04 or TB-04 PRO chassis model with this steel bevel gear set. Steel bevel gears possess highly durable teeth, enabling them to be used in conjunction with high-powered motors. This set contains the bevel gears to fit out one gear differential.

20T Steel Bevel Gear x2
12T Steel Bevel Gear x4
Compatible with TB-04, TB-04 PRO and TC-01

These are carbon fiber chassis stiffeners for use on the Tamiya TC-01 chassis. The parts expand your chassis flex tuning options. They are ideal to use when driving on high-grip surfaces and also ideal when looking to achieve sharper driving feel.

• Carbon Front Stiffeners x2
• These components connect the front cover with the chassis, raising chassis rigidity.
• Parts are crafted in highly rigid and lightweight carbon fiber.
• Compatible with TC-01 chassis cars.

These are carbon fiber chassis stiffeners for use on the Tamiya TC-01 chassis. The parts expand your chassis flex tuning options. They are ideal to use when driving on high-grip surfaces and also ideal when looking to achieve sharper driving feel.

• Carbon Front Stiffeners x2
• These components connect the front cover with the chassis, raising chassis rigidity.
• Parts are crafted in highly rigid and lightweight carbon fiber.
• Compatible with TC-01 chassis cars.

These black 5-spoke wheels are a variant of those which were first used on the R/C Porsche Carrera GT model. “Hard” denotes the use of reinforced plastic, which gives different handling characteristics on Tamiya’s various touring car machines.

• Medium-Narrow 5-Spoke Wheels (Hard) x4
• Compatible with Tamiya touring car chassis machines.

Ball-End Adjusters are used in partnership with threaded shafts to allow swift and convenient adjustment of a range of components on R/C models. Tamiya’s classic design ball-end adjusters have been updated with this new design consisting of an open-face, which are open on both sides of the connector to allow easier access when working on your model. Their design and reinforced material give improved durability. 2 sizes are available!

• Open Face 5mm Reinforced Adjusters (Medium) x8
• Length: 11.5mm
• May require filing down when used on some models.

This useful crossmember piece is crafted from carbon fiber material. It will reduce “wobble” experienced in the body mount pieces, which helps keep your car more stable through corners.

• Carbon Body Mount Crossmember (Front) x1
• O-Rings x2
• 6mm Snap Pins x4
• The design features two holes allowing attachment of a transponder in different positions.
• Compatible with TA07, TB-04, TRF419 chassis machines.

5MM BALL CONNECTOR: 43514

5MM BLUE ALUMINUM BALL CONNECTOR.

The steering arms found in the TC-01 chassis are made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Arms Left & Right x1 each
• These precision, lightweight aluminum parts can be used in place of the kit-standard plastic components T4 and T7. They give secure attachment, as well as direct steering feel and superior durability.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering bridge in Item 54957.
• Compatible with TC-01 chassis cars.
• Ball bearings are not included. 850 (8x5mm recommended)

These gears for the TB-04 chassis are made of carbon fiber-reinforced resin material, making them more resistant to wear and therefore suited to use with higher-powered motors.

• 40T Carbon Fiber-Reinforced Ring Gear x1
• 16T Carbon Fiber-Reinforced Bevel Gear x1
• 20T Carbon Fiber-Reinforced Miter Gear x1
• Compatible with TB-04 chassis cars.
• For best performance, it"s best that gears be installed as a set, and not individually.

This Hop-Up Option is for use with the TC-01 chassis. It helps to contribute to more efficient drive-line efficiency compared to using the kit standard dog-bone set up.

• Crafted in durable and rigid steel, this component can be used in place of kit-standard dog bone and cup parts, which provide true rotation at a range of angles for free, efficient power.
• Compatible with TC-01 chassis cars.
• Please note that this set contains parts to assemble one shaft. Two sets are required to complete the upgrade from front to rear.

These rocker arm posts replace the stock Tamiya TC-01 chassis posts, which will reduce overall weight to your machine.

• Aluminum Rocker Arm Posts x4
• These are precision, lightweight aluminum parts, which lighten the chassis by nearly 2 grams.
• Components have a hard-anodized finish for durability.
• Compatible with TC-01 chassis cars.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to improved suspension feel. Compared to the standard plastic parts, these parts have less flex which contribute to more direct feel from the suspension.

• Aluminum Rocker Arms x2
• Lightweight and rigid aluminum arms can be used in place of kit-standard plastic components, boosting damper performance and improving suspension feel.
• Parts have Tamiya blue anodized finish.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear rocker arms.

ZooRacing 3-piece 190mm Touring Car Wing Set

ZooRacing have announced the release of their new 3-piece wing set that includes three different design wings to fine-tune the aerodynamics of most of today’s 1/10th scale 190mm touring car bodies. Included are the wing of the ultra-popular DBX/PreoPard/ZooZilla series, the highly-curved HellCat rear wing as well as the new BayBee rear wing, all moulded from high-quality polycarbonate.

Also included are a total of six polycarbonate endplates. Using the set comes in handy especially when running ZooRacing’s ultra lightweight 0.5mm bodies that greatly profit from the tougher and less flexible rear wings as they improve overall downforce without adding too much weight. In addition the different shapes of the wings allow to fine-tune the aerodynamic balance if conditions call for it.

The wing set is usable with all 190mm touring cars that use a 100mm wing post spacing – being it originals or rip-offs.

This is a spare body parts set of the 1/10 scale FIA Formula E Gen2 race car. It is specifically designed to fit the Tamiya TC-01 chassis machine.

• Polycarbonate body. Rear wing and side parts, with halo and side mirrors molded as separate components in polycarbonate-ABS (white).
• Stickers included to decorate your car in the futuristic looking Championship Livery scheme.
• Compatible with TC-01 chassis cars only.

The steering bridge found in the TC-01 chassis is made out of plastic. This upgraded version is made of machined aluminum which changes the steering feel of your car and provides smoother operation. Use the upgraded part for a sharper handling feel.

• Aluminum Steering Bridge x1
• This precision, lightweight aluminum bridge can be used in place of the kit-standard T9 plastic part. It boosts overall chassis rigidity and smooths out handling.
• Tamiya blue anodized finish.
• Recommended for use with the aluminum steering arms in Item 54958.
• Compatible with TC-01 chassis cars.

This Hop-Up Option is for use with the TC-01 chassis, and helps to contribute to superior cornering stability.

• Soft (1.1mm), Medium (1.2mm) & Hard (1.3mm) Stabilizer Rods x1 each
• Aluminum hex head ball connectors allow easier adjustment.
• The stabilizer can be employed on the front or the rear, helping the car balance going through corners. It fits snugly between the upper cover and the chassis, and clearance can be adjusted via the 3x3mm grub screws.
• Black base color rods have color markings to differentiate their stiffness.
• Compatible with TC-01 chassis cars.
• Requires TWO sets to compete one car with front and rear sway bars.

These double cardan shafts promise super-efficient power and enhanced durability for your touring car chassis model. They are designed to fit the Tamiya TC-01 and TB-05 chassis machines. They may also be used with Tamiya cars outfitted with the TRF 419 (Tamiya Racing Factory) Suspension Upgrade Set or the TA05 & TA05IFS Short Reversible Suspension Set.

• Assembly type 39mm Double Cardan Joint Shafts x2
• Dual joints ensure that rotation is efficient, and the motor's drive is transmitted to the wheels with minimal power loss.
• Black finish.
• Needle pin length has been increased from 9.8mm to 10.8mm, for improved durability when using separately sold Item 54921 Reinforced Swing Shaft Caps.
• Compatible with TC-01 and TB-05 chassis cars, or those using Items 54886 or 54083.

This titanium screw set is for the TC-01 chassis. It contains 76 screws of different types, which are in total roughly 13g lighter than kit-standard steel equivalents. They employ Hex heads to enable even more secure tightening compared to Philip head screws in the original kit.

• 3x5mm Titanium Hex Head Screws x4
• 3x6mm Titanium Hex Head Screws x6
• 3x8mm Titanium Hex Head Screws x18
• 3x10mm Titanium Hex Head Screws x13
• 3x12mm Titanium Hex Head Screws x12
• 3x6mm Titanium Hex Head Countersunk Screws x5
• 3x8mm Titanium Hex Head Countersunk Screws x10
• 3x10mm Titanium Hex Head Countersunk Screws x8
• Compatible with TC-01 chassis cars.

Hudy Alu Nut M4 - Blue (10)

SkyRC set-up system fits all 1/10 touring cars. It is designed for precisely measure and set your cars’ camber, toe, steering and caster. A well-adjusted car will show a great performance on track and help you win races.

SkyRC Setup System - Black

YellowRC Xt60 Female To Tamiya Charge Cable 12awg 300mm

YellowRC Xt60 Female To Ec5 Charge Cable 12awg 300mm

YellowRC Xt60 Female To Xt90 Charge Cable 12awg 300mm

YellowRC Xt60 Female To Deans Charge Cable 12awg 300mm

Yellow RC Charger Cable 4mm Banana Plug To JST(female) 300mm

1/10 Ford Mustang GT4 (TT-02) Kit

Geïnspireerd door de Ford Shelby GT350R-C, is de Ford Mustang GT4 ontworpen om te concurreren in GT4-racen over de hele wereld. Aangedreven door een 5.2-liter V8, en met een 6-traps sequentiële paddle shift transmissie, multimatische ophanging en aerodynamisch verfijnde body, snijdt de Mustang GT4 een opwindend figuur. Nu maakt het een triomfantelijke entree in het Tamiya-assortiment van R / C-modellen. Het TT-02-chassis is aanpasbaar en leuk om te rijden - een goede keuze om aan de slag te gaan met R / C-touringcars!

Over het model

• Dit is een assemblagekit voor het R / C-model met 1/10 schaal. Lengte: 459 mm.
• De gespierde vorm is vastgelegd in polycarbonaat en is ontworpen met toegang tot de CAD-gegevens van de eigenlijke auto voor buitengewone nauwkeurigheid. Voor en achter lichte gevallen zijn ook gegoten in polycarbonaat.
• Wielkasten zijn voorgesneden voor een eenvoudiger montage van de carrosserie.
• De beginnersvriendelijke, zeer flexibele TT-02 is een veelzijdig en eenvoudig te onderhouden 4-assig chassis met asaandrijving.
• Afzonderlijk gegoten plastic onderdelen geven de achtervleugel en zijspiegels weer.
• Racy 10-spaaks wielen zijn gegoten in gun metal en gecombineerd met slick-banden.
• Stickers zijn inbegrepen om een ​​originele kleurenprint te maken, net als maskerende stickers voor gebruik bij het schilderen.
• Een uitgebreid aanbod van TT-02 optie-onderdelen biedt een aantal mogelijkheden om uw auto te tunen.

Tamiya nummer: 58664

De getunede uitvoering!

Deze verbeterde versie van de TT-02 chassis bevat een schat aan tuning onderdelen en een aantal nieuwe onderdelen.
De race-onderdelen zijn de wielomhanging, motorsteun, de aandrijfassen, differentieel uitgangen, etc .. De ophanging bevat metalen onderdelen en dempers zijn CVA oliegegevuld. De veelzijdigheid enhet gebruiksgemak van de TT-02 blijven.

Inbegrepen tuning onderdelen:
Nieuw ontworpen aluminium achteras houder met 3 graad spoor
Aluminium motorsteun

53159 4mm Aluminium stopmoer (Blauw)
53.642 5mm Aluminum ball Connector (Blauw)
54247 3x18mm Aluminium Turnbuckle Shaft (Blauw) x2
54500 TT-02 High Speed Gear Set (68T)
54501 TT-02 Aluminium aandrijfas
54502 TT-02 Aluminium meenemer voor aandrijfas

Over het model
RC kit in 1:10 schaal
Nieuw ontwikkelde achterfusee met 3 ° hoek voor meer stabiliteit in de bocht.
Soepel lopende middenaandrijving door aluminium as met alu-cups.
CVA olie dempers in zilver met zwarte veren.
Modieuze 10-spaaks wielen .
Houdt u er rekening mee dat de body, accu, motor en RC apparatuur niet in de kit aanwezig zijn.

The very popular and successful Twister body from Xtreme Aerodynamics got an update to reach even more performance on the track! The new body is now called “Twister Speciale” and received only some small changes during its further development. But these changes are resulting in more corner speed, more rotation and more top speed! Give it a try and you will feel the difference!

The “Twister Speciale” ist now available in 3 different weight categories:

• MX-MTB0415-07 Xtreme 1/10 Twister Speciale Clear Body 0.7mm (190mm) perfect for ETS!
• MX-MTB0415-06 Xtreme 1/10 Twister Speciale Clear Body 0.6mm (190mm) light.
• MX-MTB0415-05 Xtreme 1/10 Twister Speciale Clear Body 0.5mm (190mm) extra light.

The very popular and successful Twister body from Xtreme Aerodynamics got an update to reach even more performance on the track! The new body is now called “Twister Speciale” and received only some small changes during its further development. But these changes are resulting in more corner speed, more rotation and more top speed! Give it a try and you will feel the difference!

The “Twister Speciale” ist now available in 3 different weight categories:

• MX-MTB0415-07 Xtreme 1/10 Twister Speciale Clear Body 0.7mm (190mm) perfect for ETS!
• MX-MTB0415-05 Xtreme 1/10 Twister Speciale Clear Body 0.6mm (190mm) light.
• MX-MTB0415-04 Xtreme 1/10 Twister Speciale Clear Body 0.5mm (190mm) extra light.

Widely regarded as the best type of tape in the industry. Easily adheres electrics to chassis, this clear tape is now available from CORE RC.

Relatively large roll at 3 metres in length but still suitable to fit in your tool bag with ease.

Sticks extremely well and peels off in one piece with no residue.

3m roll.
25mm width.
55mm diameter when new.
Approx 1mm thick.

ABSIMA T-plug (Deans) female battery plug to Tamiya male plug