Glow plug connector mini blauw AA maat (penlite)

Handige Glowstecker met blauwe geanodiseerde accuhouder. Dankzij het compacte ontwerp, die is ontworpen voor het gebruik van AA-batterijen, past de mini blue zelfs in de kleinste toolbox. De Mini Blue Glowstecker wordt geleverd zonder penlite.

Artikelnummer: 801216

3.5mm diameter banana connector used for motor connection. Set of 3 female side.

Yokomo 3×7×0.5mm Washer (Steel·10pcs)

Yokomo 3×6×0.5mm Washer (Steel·10pcs)

Yokomo 3.1×5.0×0.5mm Stainless Shim (10pcs)

Yokomo 3.1x5.0x0.3mm Stainless Shim (10pcs)

Yokomo 5.0×7.0×0.5mm Spacer (8pcs)

Yokomo 5.0mm Spacer Shim (0.05/0.10/0.20mm·10pcs each)

Yokomo 5.0mm Spacer Shim (0.13/0.25/0.50mm·20pcs each)

RC Maker Brass Roll Centre Shim Plate Set for Xray X4 - 2.5mm

Changing roll centres on your X4 has never been easier, rather than undoing the whole screw and having shims flying everywhere, simply loosen the screw, slide the shim plate out, and install the new roll centre shim plate, and re-tighten the screws! 

With the success of our Carbon Roll Centre Shim Plates, and the ever demanding focus on weight distribution and adding additional weight down low on the Mid Motor platform, we decided to produce brass versions in the most common thicknesses used today. 

Available in commonly used 1.5mm, 2.0mm, 2.5mm and 3.0mm thicknesses, it gives you a great range of roll centre options to choose from, whilst being able to move weight around your car to adjust the front/rear weight bias. Whilst these may not be a large amount of weight, due to the placement on the car being very far from the centreline, it can have quite a big impact on the handling of your car.

We suggest running them both front, and rear. However if you feel you need more steering, you could replace the front with carbon and leave the rear brass. If you have too much steering and need more rear traction, then you could leave them in the front only, and use carbon in the rear.

These can also be stacked with the carbon 0.5mm and 1mm Shim Plates if desired.

Each pack comes with a pair of front and rear (different lengths) identified by the one (front) or two (rear) indents.

Features:

• Easy roll centre adjustment 
• 4 Different Thicknesses available for different roll centres (1.5, 2.0, 2.5, 3.0)
• 1.5mm Set adds 6g of weight at the lowest point of the car
• Adds weight at ends of the car to adjust weight bias
• Can be used with any brand Chassis plate
• CNC Machined from high quality Brass in Melbourne, Australia 

Includes:

• 2x Front 2.0mm Brass Roll Centre Shim Plates
• 2x Rear 2.0mm Brass Roll Centre Shim Plates 

Changing roll centres on your X4 has never been easier, rather than undoing the whole screw and having shims flying everywhere, simply loosen the screw, slide the shim plate out, and install the new roll centre shim plate, and re-tighten the screws! 

With the success of our Carbon Roll Centre Shim Plates, and the ever demanding focus on weight distribution and adding additional weight down low on the Mid Motor platform, we decided to produce brass versions in the most common thicknesses used today. 

Available in commonly used 1.5mm, 2.0mm, 2.5mm and 3.0mm thicknesses, it gives you a great range of roll centre options to choose from, whilst being able to move weight around your car to adjust the front/rear weight bias. Whilst these may not be a large amount of weight, due to the placement on the car being very far from the centreline, it can have quite a big impact on the handling of your car.

We suggest running them both front, and rear. However if you feel you need more steering, you could replace the front with carbon and leave the rear brass. If you have too much steering and need more rear traction, then you could leave them in the front only, and use carbon in the rear.

These can also be stacked with the carbon 0.5mm and 1mm Shim Plates if desired.

Each pack comes with a pair of front and rear (different lengths) identified by the one (front) or two (rear) indents.

Features:

• Easy roll centre adjustment 
• 4 Different Thicknesses available for different roll centres (1.5, 2.0, 2.5, 3.0)
• 1.5mm Set adds 6g of weight at the lowest point of the car
• Adds weight at ends of the car to adjust weight bias
• Can be used with any brand Chassis plate
• CNC Machined from high quality Brass in Melbourne, Australia 

Includes:

• 2x Front 1.5mm Brass Roll Centre Shim Plates
• 2x Rear 1.5mm Brass Roll Centre Shim Plates 

T-Work´s Solder Wire 1mm, 15g

T-Work´s Silver Solder Wire 3%Ag. 15g

De regenband voor 1:10 toerwagens toegestaan voor NK.
SET VAN 4 STUCKS.

Rush Pre-Glued Tyres 24X VR3 High Precision (4pcs)

Connector : JR Female plug (10pcs)

Connector : Futaba Male plug (10pcs)

Connecteur : Futaba Femelle (10pcs)

900098, Carson, 1/8 Banden op velg gelijmd Specter Two Pro BI 6S (2St)

Highspeed banden voor Modellen tot 100kM/H

Diameter 115mm

Carson nummer: 900098

X4 HORIZONTAL BODY POST MOUNTING GAUGE

RC Med Narrow Mesh Wielen 4pcs - Verguld/Offset +2 (4pcs)
Deze wielset bevat 4 goudkleurige metalen vergulde mesh-wielen. Dit mesh-wiel ontwerp is ook verkrijgbaar in wit. (artikel 53468)
-Vergulde 24mm Medium- Narrow Mesh Wheel x4
-Compatibel met 1/10 schaal R / C toerwagens.

Tamiya nummer: 54736
 

Robitronic Batterie Transport Box for 8 Batteries

This setup system is made to adjust camber, toe, steering and caster angles on your RC car with accuracy. A carryinh bag is also supplied. Color : Blue.

1:10 setup wheels. Material : Aluminium. Color : Black

HUDY HARD CASE - 230x180x45MM - TOOL BAG SMALL

iSDT D2 12A 200W Dual Port Smart Charger

The small KAVAN C100 Duo 2x500W dual channel charger has been designed to offer an intelligent, high performance charger with mains and car battery power and very simple and clear operation. The C100 Duo can charge and discharge common cell types (NiCd, NiMH, LiPo, LiHV, ULiHV, Li-ion, LiFe, Pb), plus it features built-in six-channel balancers to ensure safe charging of lithium batteries. The charger is equipped with a colour LCD display and programming buttons that provide you with the possibility of comfortable and very clear parameter setting, control and monitoring of the charging/discharging process. Of course, English and German menus are available.

In addition to the compact "palm-sized" design and intuitive operation, it is worth a special mention: 

• charging program for new types of "high voltage" lithium batteries LiHV with a terminal voltage for charging up to 4.35 V and ULiHV with a terminal voltage of 4.45 V
• powerful balancer with current up to 1.5 A
• synchronous operation of both channels for charging two identical batteries or parallel charging of one battery up to 800 W
• adjustable end-voltage for charging and discharging of lithium batteries (allows more gentle charging, which aviators like, or, on the contrary, brutal overcharging, which "car guys" like)
• adjustable end-voltage for charging of lead-acid batteries (1.90-2.45 V; allows charging of all types of lead-acid batteries)

Overview of basic functions and parameters:

• Mains power supply 100-240 V/50-60 Hz
• Power supply 10-30 V DC (XT60 socket)
• For charging and discharging 1 - 16 NiCd/NiMH cells, 1 - 6 Li-ion/Li-poly/Li-Fe/LiHV/ULiHV cells or 2- 24 V lead-acid batteries
• Adjustable charging current (0.2 A - 20.0 A) at each channel (max. 100 W with mains power, max. 500 W with car battery or powerful stabilized power supply)
• Adjustable discharge current 0.2 A - 1.5 A at each channel
• Max. power for charging 1x 800W in parallel charging mode
• Max. discharge power 2x 15 W, max. 1x 30 W in parallel discharge mode 
• Charge termination with delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current/constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries 
• Adjustable end-voltage for charging and discharging of lithium and lead-acid batteries 
• Three modes for lithium batteries - charge, discharge and storage charge/discharge; all with or without a balancer. Plus a disposal discharge mode to safely discharge a discarded battery before it is sent for recycling
• Channel CH1 can operate as a stabilized power supply with adjustable voltage 2-30 and current 1.0-5.0 A
• Easy firmware update via USB-C port
• Backlit colour LCD display with simple and clear menu and parameter display during charging/discharging
• Programming buttons for easy and clear setting and control of the charger
• A number of warning messages contribute to safe operation - incorrect input voltage, incorrect wiring, unsuitable battery or its condition, incorrect polarity at the output, etc.
• Forced cooling fan
• Small dimensions

Specifications:

The charger is equipped with XT60 output sockets in both channels and universal sockets for JST-XH balancer connectors, allowing direct connection of battery power cables and JST-XH balancer connectors of sets 2-6S - if you use sets with XT60 and JST-XH connectors, you can do without charging cables and adapters. You can use standard Sky RC or RC System adapters to connect balancer connectors from other systems.

Rush Pre-Glued Tyres 36X VR3 High Precision (4pcs)

Rush VR3 36X High Precision Pre-glued Tire 36deg RU0863 (4Tires with wheel and inserts 10X
incl gratis verzenden in NL

Bittydesign 1/10 Touring AHURA 1/10 GT Clear Body 190mm

Bittydesign AHURA GT body shell for 1:10 scale onroad RC cars.

Content:

• AHURA 190mm polycarbonat body shell
• Window masks for painting
• Decal sheet
• Rear wing incl. mounting hardware

1/10 R/C Astute 2022 (TD2)

- Bouwpakket in schaal 1/10
- Lengte: 387mm, Breedte: 246mm, Wielbasis: 283mm
- Body ontworpen door de Japanse ontwerper Kota Nezu van znug design.
- TD2 chassis - gebaseerd op de 4WD broer TD4 heeft een binnenboord veersysteem met 25 graden kick-up en olie schokdempers.
- chassis is gebaseerd op het monocoque chassis van de TD4 en heeft hetzelfde kogeldifferentieel
- Volledig gelagerd
- Gegroefde banden vooraan en spijkerbanden achteraan met nieuwe Star Dish-velgen op de vooras met zeskant opname.
- Achtervleugel kan in twee verschillende hoogtes worden gemonteerd/ingesteld worden
- servosaver High Torque
- incl. bestuurdersfiguur voor een realistische look

Benodigde accessoires:
- Afstandsbediening met ontvanger
- Stuurservo, 7.2V
- NiMH-batterij
- batterijlader
- Verf voor polycarbonaat body (TAMIYA PS-)
- 540cc motor
- elektronische snelheidsregelaar

Leveromvang:
- 1/10 R/C Astute 2022 kit

Tamiya nummer: 58697

Features:

• Compatible with FH5/FH5U
• Size: 26.0 x 23.2 x 14.0 mm
• Weight: 6.2 g
• Water Proof (Same as IPX4)
• Compatible receiver with INDICATOR FUNCTION.

One of the outstanding feature of MT-5 is the indicator function which can check signal receiving condition with using RX-493i. The conditions can be used for checking device and correct receiver placement.

Mon-Tech RS GT3 1/10 GT Clear Body 190mm

AXON Precision Shock Bladder Type FLEX NBR (4pcs·for Yokomo BD9, Xray T4)

Mon-Tech Wing Front 2022 White Mon-tech Racing have presented their Formula wings aimed at reproducing the 2022 F1 regulations. After almost a year of work between drawings, prototype printings and track tests, they were finally able to move to a production stage. The front wing has two different types of additional flaps and, as such, it is able to offer three distinct race trim configurations, low, medium and high downforce.

Mon-Tech Wing Front 2022 Black Mon-tech Racing have presented their Formula wings aimed at reproducing the 2022 F1 regulations. After almost a year of work between drawings, prototype printings and track tests, they were finally able to move to a production stage. The front wing has two different types of additional flaps and, as such, it is able to offer three distinct race trim configurations, low, medium and high downforce.

ZooRacing ANTI 1:10 Touring Car Body - 0.7mm REGULAR

The ANTI is ZooRacing´s new high-performance touring car body. Developed from the experience with the super successful Wolverine body, but with more overall downforce and a more stable rear in mind. Key areas, like a super low nose, a steeper bonnet and arch-designed side windows, were carefully optimized. The main body has a more wedge design to improve the airflow to the rear and creates a lot more downforce. For a more fluent handling, the ANTI has a little more stretched cabin as well as a homogeneous airflow behind the roof to reduce drag and turbulences. New inverted fin design on the trunk reduces turbulences and increases static stability at the rear section, which results in a better approached flow to the new designed rear wing. The rear wing design is curved accordingly to the body lines and has a step/fin design to improve stability. The result is less flex and more downforce on high speeds.

The handling with the ANTI body is less aggressive than the Wolverine and allows a lot more overall stability. Especially at corner exits it´s less critical to drive and gives more trust and confidence when accelerating. Perfect for modified racing where downforce is needed and stock racing for all drivers who are looking for a less aggressive body than the Wolverine. On top of that all is the ZOOlite moulding process that reduces the overall weight of our standard thickness 0.7mm body shells by about 10g. This ensures the standard shells are legal for all races with minimum body weight rules, while significantly lowering the overall centre of gravity. In addition, ANTI is also available in our proven, lightweight 0.5mm variant for everyone looking for the outmost of performance.

Part of the package are also the revolutionary 2-step window masks that will ensure window frames of Pro quality. In a first step all windows are masked using the Step 1 masks. After the painting of the body is completed, the masks will be removed and replaced by the slightly smaller Step 2 masks that leave the window frames exposed and ready to be painted in your favourite colour. The result is highly precise without the need to pre-cut or in-body-cut the window masks, ensuring greater satisfaction and less chances of creating predetermined breaking points. The body package is rounded out by high-quality wing mounting hardware and a detailed sticker sheet including grille, head, and taillights.

The Anti is available in two versions:

 LIGHTWEIGHT (ZR-0014-05): 0.5mm thick – ca. 55g of weight with single colour paint and stickers)

REGULAR (ZR-0014-07): 0.7mm thick – ca. 75g of weight with single colour paint and stickers)

Features:

• CAD designed
• Specialized LCG body shell with a more realistic design and less aerodynamic drag
• Low, and yet realistic front end with sculptured hood and grille details
• Updated Wolverine-style roof section for less aerodynamic drag and higher cornering speeds
• Recessed roof to channel the airflow and to create greatly improved structural stability thanks to static reinforcement
• Structured rear end for anti-tuck capabilities
• Large wheel arches allow the body to be placed 4mm front or back (8mm in total)
• Large wheel arches ensure the tires will not rub in whatever position
• Anti-tuck capabilities with structured side skirt static reinforcement on the hood. Especially useful when running the ultra-lightweight variant
• Detailed decal sheet
• 2-step window masks
• Wing mounting hardware
• 100mm grid on the rear truck lid for easy and convenient body mounting
• Designed to meet GBS rules
• EFRA and IFMAR approved for 2022

VERLOOP BUS VOOR LIPO ACCU'S VAN 5MM NAAR 4MM.

TRAXXAS-DRAG RACE START LIGHT-6595

X4 REAR ROLL-CENTER SPACER (2)

X4 FRONT ROLL-CENTER SPACER (2)

1:10 RC M-08R Chassis Kit
Onze populaire M-chassisserie verwelkomt een nieuwe toevoeging - dit keer de M-08R Chassis Kit. Dit chassis maakt gebruik van verschillende soorten optionele onderdelen, zoals kogeldifferentiëlen en CVA-oliedempers om zich klaar te maken voor races.

Over het model
- Gebruik 5x11mm harde zeskantige kogelconnectoren om de ophanging te vergroten.
- Speciale draagtas en stickers worden ook meegeleverd.
- Compatibel met M-07 Concept Hop-Up Option-onderdelen zoals aluminium achterste staanders (item 54781) en aluminium achterwielophanging (item 54760) en M-08 Concept Hop-Up Option-onderdelen zoals aluminium voorwielophanging (0°) (item 54907), aluminium stuurarmen (L/R) (item 54891) en aluminium stuurbrug (item 54892).

inbegrepen:
- 42143: 4 mm aluminium getande wielmoer (4st./blauw)
- 42357: Dwarsverbindingen voor universele assen met lage wrijving
- 51000: Hi-Torque Servo Saver (zwart)
- 53509: Hard fluor gecoat 0.6 aluminium rondsel (20T/F201)
- 53642: 5 mm aluminium kogelconnector (blauw) • 53823: klemtype aluminium wielnaaf (5 mm dik)
- 53851: 46 mm titanium gecoate ophangassen 2st.
- 53917: φ 2,6 mm titanium gecoate ophangasset voor omkeerbare ophanging
- 53968: 5x5mm harde zeskantige kogelkopconnector (5st.)
- 54183: M-Chassis Versterkte vrijloopasset
- 54868: Open gezicht 5 mm versterkte regelaars (medium/8st.)
- 54869: Open gezicht 5 mm versterkte regelaars (lang/8st.)
- 54906: M-08 Concept aluminium assenset
- 54969: 33 mm lichtgewicht aluminium zwenkassen (2 stuks)
met certificaat voor deelname aan de Tamiya Cup NL
Tamiya nummer: 47480
 

LiPo Veiligheidstas Tamiya Design

Bewaar je lipoaccu ́s veilig

Carson nummer: 906229

RC Rubber Anti-Slip Sheet

A loosely secured battery can ruin your drive by moving around and altering the balance of your car. Help stop that with this effective anti-slip sheet, which is highly versatile. Place the tape between the chassis and battery pack for maximum effectiveness.

25 x 130mm Rubber Anti Slip Sheet x1
Thickness: 0.2mm
One side is fitted with double-sided tape.

Body Set Raikiri GT Bright Gun Metal/Pre-Painted

Product nr.: 54775EAN
: 4950344547753

De populaire en stijlvolle Raikiri GT carrosseriedelen set verkrijgbaar als voorgelakt lichaam. Breng gewoon stickers, spiegels en je set aan! Dit product vereist nog steeds uitsnijden, openen van gaten, aanbrengen van stickers en achtervleugelbevestiging.

Mon-Tech F1-2022 Rear Wing - White

Mon-Tech rear wing for 1:10 scale Formula cars. The wing is made from a durable plastic material and
you can use it for a very long time. It is possible to mount this wing on almost every 1:10 scale formula car on the market!

Content: 1 x Mon-tech Formula rear wing (white)