GT12 Atom Rear Q Foam 35Sh - 48mm CONTACT

GT12 Atom Rear Q Foam 35Sh - 48mm CONTACT
Q foam offers more performance than A foam in most conditions. It does however have higher wear rates so needs to be replaced slightly more often than A. It works great on ETS type carpet. Compared with T foam it is capable of matching T foams performance on lap time, although it has a tendency to lose some of its performance throughout the race when using all non-oil type additives such as SXT3.0 or Nosram Carpet.

IMPACT SERVO SAVER - MI5-MI7,FT,E4/5,ICON/2,A3

IMPACT SERVO SAVER - MI5-MI7,FT,E4/5,ICON/2,A3

K-Coat Nano Shock Body - Mi9 (pk4)SCHUMACHER

K-Coat Nano Shock Body - Mi9 (pk4)

Lightweight Foam Bumper V2 - Mi7,Mi8,Mi9

Lightweight Foam Bumper V2 - Mi7,Mi8,Mi9

The lightest version of the Mi7, Mi8 and Mi9 bumpers. The new black V2 version weighs in at just 2.6g compared to the kit 9.2g V2 version available from 07/2024

LIPO MOUNTING MOULDINGS SET - MI7,FT,MI8 SCHUMACHER

LIPO MOUNTING MOULDINGS SET - MI7,FT,MI8

LIPO O RING PK6 - E2/5,ICON/2,A3

LIPO O RING PK6 - E2/5,ICON/2,A3

LOW OPTION HEXAGON 3D BUMPER - ECLIPSE 5

Voor de Eclipse-reeks auto's is deze optionele 3D-geprinte lichtgewicht bumper.

De bumper biedt dezelfde lichaamsondersteuning en geweldige bescherming voor de carrosserie als het kitonderdeel in de Eclipse 5-kit.

Deze nieuwe versie verlaagt de hoogte van de carrosserie aan de voorkant met ongeveer 3 mm, wat geweldig is voor racers die hun carrosserie agressief willen monteren.

Het is ook een ideale optie bij het gebruik van verschillende carrosserieën, waaronder de nieuwe Montech M22 en de populaire BA006.

M3 Alloy Washer Black 1.5 mm (pk10)SCHUMACHER

Vul hieronder de algemene informatie van het product in. Dit zijn de basisgegevens van een product. De productnaam is een verplicht veld omdat deze altijd getoond wordt.

Product actieflive_help
Ja
Nee

M3 Black Alloy Washers 1.00mm (pk10)SCHUMACHER

M3 Black Alloy Washers 1.00mm (pk10)SCHUMACHER

M3 Black Alloy Washers 3.00mm (pk10)SCHUMACHER

M3 Black Alloy Washers 3.00mm (pk10)SCHUMACHER

M3 BRASS INSERTS - PK10

M3 BRASS INSERTS - PK10

MACHINED SPUR GEAR 80T 64DP - ICON 2 SCHUMACHER

MACHINED SPUR GEAR 80T 64DP - ICON 2

MACHINED SPUR GEAR 88T 64DP - ICON 2 SCHUMACHER

MACHINED SPUR GEAR 88T 64DP - ICON 2

MEZZO 1/10 FRONT 4WD - YELLOW - PR SCHUMACHER

MEZZO 1/10 FRONT 4WD - YELLOW - PR

DE BAND VOOR HET EK 2023
The Mezzo has a completely new carcass design, where development has focused on the thickness of the profile to support the pin and improve its life.
The Mezzo has a varied pin type across the tyre, enabling it to be more suitable to a wider variety of track conditions, including long and short pile astro. The pin type gives improved side traction whilst maintaining forward traction.

The Mezzo lasts longer and has better bump handling , due to its taller sidewall profile.
The Mezzo front 4WD tyre is aimed at longer pile astro and lower gip. Pins can be cut to reduce traction if required.
For 2WD we are still recommending the U6770 Low Profile Cut Stagger combined with Mezzo rear, for a longer life tyre set up.
Ultimately the popular Dart tyre could be faster over a single run in some conditions, but life is much extended with the Mezzo. It’s a great all-rounder.
Ultimately the Mezzo is aimed at Astro, Yellow compound for dry high performance, Silver for wet and Blue for longer life.

Recommended Inserts

4WD front insert recommended for Yellow’s is;
U6669 Foam Tyre Inserts; Hard (pr).

For Silver or Blue compound is;
U6733 Foam Tyre Insert; Med - Front - CAT (pr)

The U6734 Foam Tyre Insert; Med - Rear - CAT (pr) is recommended for both Yellow, Silver or Blue rear tyres.

MINI DART 1/10 - REAR - YELLOW (PR) SCHUMACHER

MINI PIN 1/8TH PRE-GLUE - SILVER (PR)

The Schumacher Mini Pin is one of the most popular tyres for 1/8th buggys on Astro and Grass surfaces.

V2 version of the dish wheel with larger diameter for better fit.

To choose which tyre is best for what surfaces have a look at our 1/8th Buggy Tyre comparision chart.

Mini Touring 35Sh A Foam Dia 52.5mm

Mini Touring 35Sh A Foam Dia 52.5mm

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs.

Mini Touring 45Sh A Foam Dia 52.5mm

Mini Touring 45Sh A Foam Dia 52.5mm

The MTC (Mini Touring Car) Class has seen an explosion of interest in the last few years and we're happy to offer these tyres for the class.

A large amount of testing has gone into these tyres by some of the best MTC drivers in the UK.

The tyres are available in 4 shore ratings, 35, 37, 40 and 45 and are pre-glued on a very nice and durable 5 spoke wheel with 12mm hex fitting. 

Trued to 52.5mm diameter, with a width of 25.5mm, supplied in pairs.

Motor Mount Weight 26g - Mi9 SCHUMACHER

Motor Mount Weight 26g - Mi9 SCHUMACHER
The Mi9 has been refined in many key areas, optimising it’s centre of gravity, unsprung mass and reducing it’s polar moment of inertia with tactical weight reductions.

With this in mind, we have introduced motor mount weights allow for the perfect placement of additional weight in order to meet weight regulations in the best possible way.

Two versions available:

This one, U8816 – Motor Mount Weight 26g which allows power roller to be fitted, maximum pinion size 37T 48dp 50T 64dp.

And also U8815 – Motor Mount Weight 22g with Stock racing in mind with maximum pinion size 37T 48dp 50T 64dp.

The weights are attached to the kit motor mount.

Nano Shock Set - Mi9 (pk4)SCHUMACHER

Nano Shock Set - Mi9 (pk4)