Es gibt keine Produkte in Ihrem Warenkorb.
andere Marken
4 / 39
Wird geladen ...
AEROX SOLDERING STATION 150HS EU 220-240V
€ 99,95
Introducing from AEROX the awesome 150HS Soldering Station.
A fully adjustable quality soldering station at a great price.
This version is the 220-240V version with European plug.
Features
- 150W of power!
Fully adjustable temperature from 100 to 500 Degrees C.
- Super fast heat up.
- Fantastic tip cleaning solutions.
- Internal solder roll holder - Never lose your solder. Allows solder to be dispensed through the front of the unit so always ready to use. (Not pictured)
- Available with 3 different plugs for UK and Europe (220-240V) and USA (110-120V).
- Large bevel tip included, optional fine point and chisel tips available.
- Optional 'Helping Hands' to assist when soldering.
Specifications
Model - 150HS
Power - 150W
Input Voltage - 230VAC (UK/EU) (50-60Hz)
Temp. Range - 100-500℃(212-932℉)
Temp. Stability - ±2℃(±4℉) {>200℃(400℉)}
Temp. Compensation - ±50℃(±90℉)
Temp. Display - Digital
Tip to ground impedance - <0.1Ω
Tip to ground voltage - <2mV
Heater - T60 integrated PTC ceramic heater
Cable length - Power cord: 90cm Handle cable: 1.2m
Dimensions main unit: 80 x 184 x 142mm handle: 24.5 x 224mm
Net weight 516g
Aerox TC Droop Gauge & Disks
€ 28,95
Aerox TC Droop Gauge & Disks
Introducing the new Aerox droop gauge set for 1-10th Touring cars.A new universal way to take the confusion out of measuring droop across different chassis manufacturers.
Droop is a measurement used to define the point at which the tyre leaves contact with the ground. It can be a very powerful tool to quickly change the behaviour of a car. Measuring droop to the axle centre is the most accurate way of doing so, as it eliminates any potential discrepancy in the symmetry of suspension components. This method is also the only correct way to quickly and easily compare droop across different cars, without the need to
account for any differences in car design.
Using the Aerox system is simple. Fasten the droop wheels on to one pair of axles. The chassis sits on the 10mm droop blocks. The droop gauge is used to measure to the lowest part of the droop wheel. The reading from the gauge is the distance from chassis underside to the centre of axle. Repeat for the other pair of axles.
For easy storage and transportation, the M4 grub screw is inserted into the side of the droop gauge so that it protrudes
equally out of both sides. This is then locked off with the M3 grub screw from the underside. The droop wheels then attach to the droop gauge via the M4 grub screw for safe storage.
ALLOY OFFSET SERVO ARM 25T - FUTABA
€ 12,50
Black Alloy Servo Arms from CORE RC. Available in the popular 23T and 25T splines these alloy offset servo arms are ideal for a variety of vehicles and should be very popular for the Mi5evo for those who want to square up the servo/electronics installation.
Multi position pick up and with lightweight clamping screw.
Multi hole positions, 16mm, 19mm, 22mm and 25mm.
ARROWMAX INBUSSLEUTEL .078 (5/64") X100MM ZWART GOUD
€ 27,50
ARROWMAX INBUSSLEUTEL .078 (5/64") X100MM ZWART GOUD
ARROWMAX INBUSSLEUTEL 1,5 X 120 MM ALLEEN PUNT-WOLFRAAMSTAAL
€ 9,95
ARROWMAX INBUSSLEUTEL 1,5 X 120 MM ALLEEN PUNT-WOLFRAAMSTAAL VERVANG STIFT
ARROWMAX INBUSSLEUTEL 2.0X120MM TIP ALLEEN WOLFRAAMSTAAL VERVANG STIFT
€ 9,95
ARROWMAX INBUSSLEUTEL 2.0X120MM TIP ALLEEN WOLFRAAMSTAAL VERVANG STIFT
ARROWMAX KRUISKOPSCHROEVENDRAAIER 4.0 X 100MM ZWART GOUD
€ 27,50
ARROWMAX KRUISKOPSCHROEVENDRAAIER 4.0 X 100MM ZWART GOUD
Arrowmax Tyre Warmer (1/10th) & Batt Warmer with Bag Black Golden
€ 169,95
Arrowmax compact tyre and battery warmer. The device utilises a compact control unit for easy storage and less pit space needed with the warmer cups being of Arrowmax’s signature black and golden design. They connect to the front side of the case, ensuring easy organisation of the wires. The control unit is equipped with an XT60 connector, allowing to power the tyre warmer using a 13.8V power supply or a 3S LiPo battery. Built-in sensors ensure precise temperature control, independently for the front and rear tyres, and the warmer not only is usable as a tyre warmer but also as a battery warmer using an optional warming bag. Pre-set values ensure performance enhancing and very high user safety.
These tire warmer cups will keep warm in longer time and the outer silicone material will not burn your hands easily.
AXON Black Silicon Ring P3/Medium (8pcs)
€ 8,99
The black silicone ring was developed exclusively for oil dampers. The material is Axon's original black silicone rubber to maximize the stability of the suspension. And, in order to achieve both smooth damper movement and overwhelming stability of the machine, we finished it with a unique shape that can not be found anywhere else. By applying Axon core shock grease at the same time, ideal damper performance can be obtained.
(Compatible models: Yokomo cars, Tamiya cars, Kyosho cars, etc.)
AXON Black Silicon Ring P3/Soft (8pcs)
€ 8,99
The black silicone ring was developed exclusively for oil dampers. The material is Axon's original black silicone rubber to maximize the stability of the suspension. And, in order to achieve both smooth damper movement and overwhelming stability of the machine, we finished it with a unique shape that can not be found anywhere else. By applying Axon core shock grease at the same time, ideal damper performance can be obtained.
(Compatible models: Yokomo cars, Tamiya cars, Kyosho cars, etc.)
AXON Clear Protection Sheet for Battery (30x135x0.1mm)
€ 5,95
Battery rubber sheet has a heavy center of gravity when heavy batteries are installed in the machine.
So it tends to be a bad driving feel.
Axon Clear Protection Sheet is „Thickness 0.1mm“ so it can be mounted low on the battery, it is a NEW item that can suppress machine roll.
And since this sheet flexibility, it does not obstruct chassis roll at all, it realizes low center of gravity, very natural machine feel.
Specifications:
|
Dimensions |
30.0x135.0x0.1mm |
