Xtreme 1/10 Twister Touring Car Clear Body 0.5mm ( 190mm )

The all new Twister body from Xtreme is the newest contender on the high downforce body shell market. The body has a cab-forward design and produces a lot of downforce which makes it very easy to push the car to its limits. The Twister is made from high quality polycarbonate and comes unpainted with window masks and a headlight decal sheet. The body is available in a thickness of 0,5mm and 0,7mm.

Available Versions:

MX-MTB0413-05 Xtreme 1/10 Twister Touring Car Clear Body 0,50mm (190mm)

MX-MTB0413-07 Xtreme 1/10 Twister Touring Car Clear Body 0,70mm (190mm)

Xtreme Italia FWD Body (clear) 0,7mm

Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

Mach1 - fasten your seatbelts for the next stage of body shell development from Xtreme Aerodynamics.

The team around Cristian Boni once again created a great new body shell, which will impress you with a great performance and fast laptimes. 
The main features of the Mach1 are the new front hood with a significant look arount the grill and the headlights. 
New designed are also the wheel cases of the Mach1.
They will now ensure a better air flow, all the way from the front hood over the roof and along the sides of the body to the rear wing.
The whole aerodynamic efficiency of the Mach1 is an improvement over the previous bodies.
As a result the Mach1 provides more cornerspeed, a better air flow, more efficiency, and more overall downforce!

NOTE:
This body shell (0,7mm Version) is listed on the official ETS Body Shell List for Season #15 2022/23. It is allowed in the following racing classes:
ETS Pro Stock & ETS Modified

Available Versions:

MX-MTB0421-ETS  Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0421-L  Xtreme MACH1 1:10 Touring Car Clear Body - 0,5mm Lightweight

Xtreme MACH1 1:10 Touring Car Clear Body - 0.5mm

Mach1 - fasten your seatbelts for the next stage of body shell development from Xtreme Aerodynamics.

The team around Cristian Boni once again created a great new body shell, which will impress you with a great performance and fast laptimes. 
The main features of the Mach1 are the new front hood with a significant look arount the grill and the headlights. 
New designed are also the wheel cases of the Mach1.
They will now ensure a better air flow, all the way from the front hood over the roof and along the sides of the body to the rear wing.
The whole aerodynamic efficiency of the Mach1 is an improvement over the previous bodies.
As a result the Mach1 provides more cornerspeed, a better air flow, more efficiency, and more overall downforce!

NOTE:
This body shell (0,5mm Version) is listed on the official ETS Body Shell List for Season #15 2022/23. It is allowed in the following racing classes:
ETS Pro Stock & ETS Modified

Available Versions:

MX-MTB0421-ETS  Xtreme MACH1 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0421-L  Xtreme MACH1 1:10 Touring Car Clear Body - 0,5mm Lightweight

REDHAWK - dat is de naam van de nieuwste body in 2023 van Xtreme Aerodynamics.

Het team rond Cristian Boni heeft opnieuw een geweldige body ontworpen, die ook tijdens de testritten de aandacht trok met snelle rondetijden.

Het resultaat: meer efficiëntie, meer downforce, meer bochtensnelheid!

INFO:
Deze body is toegestaan in het ETS seizoen #16 2023/24 in de volgende klassen 
ETS Pro Stock, ETS Modified (alle versies)
ETS 40+ Masters / 21.5 Stock (0.7mm ETS versie)

Beschikbare versies:

MX-MTB0424-ETS  Xtreme REDHAWK 1:10 Touring Car Clear Body - 0,7mm

MX-MTB0424-L  Xtreme REDHAWK  1:10 Touring Car Clear Body - 0,5mm Lichtgewicht

MX-MTB0424-UL  Xtreme REDHAWK  1:10 Touring Car Clear Body - 0,4mm Ultra Lichtgewicht

Replacement 0.5mm pre-cut wings in two styles. It's always a good idea to check wing dimensions with your regulations, do not assume as these are pre cut they will conform without some trimming.

YellowRC Alkaline AAA 1.5V 4P, YEL2101

Yokomo 3.1×5.0×0.5mm Stainless Shim (10pcs)

Yokomo 3.1x5.0x0.3mm Stainless Shim (10pcs)

Yokomo 3×6×0.5mm Washer (Steel·10pcs)

Yokomo 3×7×0.5mm Washer (Steel·10pcs)

Yokomo 37T Hard Precision Pinion Gear (48Pitch·Light Weight)

Yokomo 49T Hard Precision Pinion Gear (64Pitch·Light Weight)

Yokomo 5.0×7.0×0.5mm Spacer (8pcs)

Yokomo 5.0mm Spacer Shim (0.05/0.10/0.20mm·10pcs each)

Yokomo 5.0mm Spacer Shim (0.13/0.25/0.50mm·20pcs each)

Yokomo 50T Hard Precision Pinion Gear (64Pitch·Light Weight)

This is an aluminum nut equipped with a nylon ring to prevent loosening. Contains 4 pieces.

Yokomo BD8/BD7 Non slip Battery Rubber Tape

Extra lichte, dunne en zelfklevende plastic schijven om je carrosseriegaten te beschermen.
De schijven zijn slechts 0,5 mm dik en hebben een binnendiameter van 5 mm.
Je kunt de gaten in de schijven naar wens vergroten met een carrosseriegatboor en ze ook gebruiken met carrosseriegaten van 6 mm en 7 mm.
Het artikel bevat 8 zelfklevende plastic schijven.