Es gibt keine Produkte in Ihrem Warenkorb.
Neu
Â
32 / 67
Wird geladen ...
NiMH Akku 4000mAh 7,2V Stick Pack T-Stecker & Tamiya
€ 34,95
Deze Rockamp NiMH-batterij met maar liefst 4000 mAh is veelzijdig en de ideale oplossing voor mensen met een krap budget. Of het nu wordt gebruikt in voertuigen, boten, vliegtuigen, startbakken of andere accessoires, de batterij blijft krachtig en levert voldoende stroom onderweg. Sluit de AKku eenvoudig aan op het gewenste apparaat via de 14 AWG-kabel met T-plug en u bent klaar om te gaan. Als u nog meer flexibiliteit nodig heeft, zult u ook verrast worden door een korte adapterkabel met Tamiya-stekker.
Specificaties:
| Spanning: | 7,2 V |
| Capaciteit: | 4000mAh |
| Aantal cellen: | 6x NiMH |
| Type stekker: | Tamiya & T-stekker |
| Kabellengte: | 110mm |
| Kabellengte (adapter): | 30mm |
| Dimensies: | 136x47x24mm |
| Gewicht: | 405g |
Robitronic Opberg- en Transporttas
€ 49,95
Productinformatie "Robitronic Storage and Transport Bag"
De transporttas is gemaakt van hoogwaardig en resistent materiaal. Binnenin is de tas versterkt met een plastic inzetstuk en verdeeld in twee gebieden met een tussenbodem. Door het gebruik is het gemakkelijk schoon te maken, zelfs oliën hebben geen kans om naar buiten te dringen. Aan de rechterkant heeft de tas ook een kleiner compartiment met klittenbandklep. Transport kan worden gedaan via de praktische schouderriem of de draaggreep aan de bovenkant.
De buitenschaal is gemaakt van een extreem duurzaam en robuust nylon en is bestand tegen zelfs de wildste toepassingen. Dit materiaal is ook zeer gemakkelijk schoon te maken.
Specificaties:
| Afmetingen (buitenkant): | 480 x 210 x 300 mm |
| Binnenste compartiment (boven): | 460 x 185 x 150 mm |
| Binnenste compartiment (onderkant): | 460 x 185 x 110 mm |
| Zijvak: | 200 x 180 x 30mm (smaller naar beneden) |
| Materiaal: | Binnenkant: kunststof inzetstuk Buitenkant: nylon |
Leveringsomvang:
1x zak
1x binneninzet
1x schouderriem
(levering als bouwpakket, montage in een mum van tijd en zonder gereedschap)
Flysky R4P ANT Receiver 4CH
€ 19,95
Product information "Flysky R4P ANT Receiver 4CH"
The R4P receiver is the ideal partner when using a Flysky remote control and is specially designed for the installation and output of PWM signals. Therefore it is supported by all ANT-capable transmitters.
Technical Specifications
| PWM-Channels: | 4 |
| RF: | 2.4GHz |
| Protocol: | ANT |
| Antennas: | Single |
| Input Voltage: | 3.5-8.4V |
| Range: | 100~300m (Ground) |
| Output: | PWM |
| RSSI: | No |
| Temperature: | -10°C to +60°C |
| Max. Humidity: | 20%-95% |
| Update: | No |
| Dimensions: | 22.6x20.6x25.5mm |
| Weight: | 6g |
| Compatible Transmitter: | all ANT-Transmitter |
Related links to "Flysky R4P ANT Receiver 4CH"
Flysky FGr4S AFHDS3 Receiver 4CH
€ 49,95
Product information "Flysky FGr4S AFHDS3 Receiver 4CH"
The FGr4S receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS and S.BUS signals. All AFHDS3-capable transmitters are supported.
Technical Specifications
| PWM-Channels: | 4 |
| RF: | 2.4GHz |
| Protocol: | AFHDS 3 |
| Antennas: | Single |
| Input Voltage: | 3.5-8.4V |
| Range: | >200m |
| Output: | PWM/PPM/i-BUS/S.BUS |
| RSSI: | Supported |
| Temperature: | -10°C to +60°C |
| Max. Humidity: | 20%-95% |
| Update: | Yes, online |
| Dimensions: | 25.5x22x17.3mm |
| Weight: | 5.1g |
| Suitable for: | Cars, Boats, etc. |
| Compatible Transmitter: | all AFHDS3-Transmitter |
Related links to "Flysky FGr4S AFHDS3 Receiver 4CH"
Flysky Noble NB4 with 2 Receiver
€ 299,95
€ 274,95
Product information "Flysky Noble NB4 with 2 Receiver"
With the NB4 radio remote control from FlySky, driving an RC car or boat offers as much comfort as it offers technical specifications. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission while being ergonomically design.
In combination with this protocol, the advantages of a wireless WS2A system and the new 2.4GHz chip, a wide variety of transmitter parameters can be set dynamically. This includes channel number, channel resolution, range, anti-interference requirements and also latency. This makes it possible to freely adjust the transmitter to Your own needs via the 3.5 inch TFT display. The real-time data exchange between the transmitter and the receiver also enables increased control over the flight model with constantly updated information on temperature and speed, for example.
Features:
- Advanced and modern radio
- Ergonomic design with turnable wheel
- Suitable for both right and left handers
- Dual Battery System
- Intelligent RF configuration
- Less than 3ms latency
- Also suited for simulators and games without using an external dongle via USB
Technical Specificatons:
| Transmitter | ||
| Type: | 2.4GHz ISM | |
| Frequency Protocol: | AFHDS 3 | |
| Channels: | 4, 6, 8 (optional) | |
| Suited RC Models: | Car, Boat | |
| Distance: | >300m (Ground) | |
| Channel Resolution: | 4096 | |
| Battery: | - 1S / (4,2V) x 4300mAh LiPo - 2600mAh 18650 Dual Battery |
|
| Low Voltage Warning: | < 3,65V | |
| Antenna Type: | Built-in single Antenna | |
| Display: | HVGA 3,5-Zoll-TFT, Resolution 320x480px | |
| Simulator: | USB Simulator | |
| Charging Interface: | Micro-USB | |
| Data Interface: | Micro-USB | |
| Temperature Range: | -10°C bis +60°C | |
| Humidity Range: | 20% bis 95% | |
| Online Update: | Ja | |
| Size: | 129x114x190mm | |
| Weight: | 520g | |
| Receiver | ||
| FGr4 | FGr4S | |
| PWM: | 4 | 4 |
| Type: | 2.4GHz ISM | |
| Frequency Protocol: | AFHDS 3 | |
| Suited Transmitter: | Alle Sender mit AFHDS3-Unterstützung | |
| Antenna Type: | Einzelantenne | |
| Voltage: | 3,5-12V | 3,5-8,4V |
| Data Interface: | PWM/PPM/i-BUS/S.BUS | |
| Temperature Range: | -10°C bis +60°C | |
| Humidity Range: | 20% bis 95% | |
| Online Update: | Ja | |
| Size: | 29x22x16,2mm | 25.5x22x17,3mm |
| Weight: | 8g | 5,1g |
Delivery:
- FlySky "NB4" Transmitter
- Reveiver: FGr4 and FGr4S
- USB data cable
- Grip shell
- Springs (S, L)
- 2x transparent protection sticker
- Manuals
Flysky Noble NB4-Pro with 2 Receiver
€ 499,95
€ 489,95
Product information "Flysky Noble NB4-Pro with 2 Receiver"
The Noble Pro breaks traditional standards with new ideas and offers extensive setting options for racers, crawlers and other RC vehicles. This 18CH transmitter with 7 channel modes is ideal for any terrain and shows top performance even in the most difficult situations. In addition, the new 2CH "Extreme Mode" with a new frequency algorithm ensures unimagined performance with only little delay.
The most striking feature of the FlySky Noble Pro is the holder for smartphones and the steering wheel, the position of which can be changed so that both left and right-handers can get the best out of their vehicle all the same. Together with the comfortable shape of the handle, this is definitely an extremely ergonomic transmitter overall.
Features:
- Set consisting of over 20 parts such as transmitter, 2x receiver, case and much more
- Ideal for any off-road use, whether on-road, off-road or on the water
- 5 mixing setting options and speed segmentation for optimal adaptation to every riding requirement
- And three built-in high-performance chips for great performance
- Variety of structural personalization options (e.g. different throttle levers, springs, steering wheels, ... )
- Suitable for both right and left handers
- With 4 PWM and 8 PWM receivers as required
- Including 2 exchangeable batteries for 8 hours of action each
- Wireless charging station for convenient energy refueling
- Easy to use touch menu
Technical Specifications Transmitter:
| Type: | 2.4GHz ISM |
| Frequency Protocol: | AFHDS 3 |
| Channels: | 2 (fast), 4, 6, 8, 10, 12, 18 optional |
| Suited RC models: | Auto, Boot, also: Roboter, Ironclad |
| Distance: | < 300m |
| Channel Resolution: | 4096 |
| Battery: | 1S / (4,2V) LiPo & 18650 Dual-Battery |
| Low Voltage Warning: | < 3.65V |
| Antenna Type: | Built-in single antenna |
| Display: | HVGA 3,5-inch TFT color screen, resolution 320x480px, LCD white backlight, capacitive touch screen |
| Simulator: | USB Simulator |
| Charging Interface: | Micro-USB und kabelloses Laden |
| Data Interface: | Micro-USB |
| Temperature Range: | -10°C to +60°C |
| Humidity Range: | 20% to 95% |
| Online Update: | Yes |
| Size: | 120x144x274mm |
| Weight: | 670g (include stand) |
Technical Specifications Receivers:
| FGr4B | FGr8B | |
| PWM: | 4 | 8 |
| Type: | 2.4GHz ISM | |
| Frequency Protocol: | AFHDS 3 | |
| Suited Transmitter: | Suitable for all transmitter supporting the AFHDS3 | |
| Antenna Type: | Single antenna | |
| Voltage: | 5.3-9V | |
| Data Interface: | PWM/PPM/i-Bus/s.bus/i-Bus2 | |
| Temperature Range: | -10°C to +60°C | |
| Humidity Range: | 20% to 95% | |
| Online Update: | Yes | |
| Size: | 17x29x16.6mm | 35x23.3x13.3mm |
| Weight: | 6.4g | 9.4g |
Delivery:
- FlySky "Noble Pro" transmitter
- Receivers: FGr4B and FGr8B
- Hard case including key
- USB data cable
- Wireless charging station
- Grip shell (XL)
- Wrist strap
- Steering wheel and sponge (L)
- 1.5mm and 2.5mm wrench
- Brake pad set
- Thread adjusting screw
- Knob
- Springs (S, L)
- Throttle (S, L, Plastic)
- Back & angle bracket
- Sticker (company logo, various)
Related links to "Flysky Noble NB4-Pro with 2 Receiver"
Tamiya primer grijs
€ 14,95
Tamiya primer grijs
Grondspray voor plastic en metalen onderdelen in model en hobby. De grijze Tamiya grondspray dekt uitstekend.
- Kleur: grijs-mat
- Inhoud 180ml
- Zonder lood, zware metalen en CFK's
TAMIYA 42352 TRF Clamp Type Alum Hubs NarTrd (4)
€ 23,50
TRF 42352 Clamp Type Alum Hubs NarTrd (4)
- Smalle wielnaven met loopvlakklem zijn een populaire keuze voor toerwagenmodellen.
- Gebruik een smaller profiel aan de voorkant voor een scherpere stuurreactie, aan de achterkant voor meer grip of zelfs over de hele auto!
- Aluminium onderdelen hebben de iconische Tamiya blauw geanodiseerde afwerking.
- Bevat vier hubs, plus vijf 1,6x4mm kolomschroeven.
Compatibel chassis
TA06, TA06 PRO, TA06 MS, TA07 PRO, TA07 MS, TB-04, TB-04 PRO, TB-05 PRO, TB Evo.6, TB Evo.6 MS, TB Evo.7, TRF419, TRF419X, TRF419XR, TRF420 & TT-02 Type-S chassis
* Voor gebruik met 24 mm brede (medium-smalle) wielen. Artikelen 53646 en 54573 zijn mogelijk vereist.
tamiya 22073 XV-02 Carbon bumpersteun
€ 13,50
Tamiya 22073 XV-02 Carbon bumpersteun
- 2mm dikte koolstofvezel bumpersteun x1
- Rubber bussen x2
- 6mm borgpennen x2
- 3x16mm ronde inbusschroeven x2
- Compatibel met XV-02 chassis auto's.
- Carbon fiber patronen geven uw model een stijlvolle racy look
Mon-Tech P9X8 LMH 1:10 Body (ongeverfd)
€ 34,95
Mon-Tech P9X8 LMH 1:10 Body (ongeverfd)
De nieuwe P9X8 is gebaseerd op de Peugeot 9X8, die rijdt in de Hyper Car LMH-serie.
De nieuwe P9X8 kan worden gemonteerd op alle toerwagens van de nieuwste generatie en op de Formule1 met een wielbasis van 260 mm.
De carrosserie wordt ongelakt geleverd, inclusief voorruitmaskers en stickervellen!
MR33 Verlengkabel RX 75mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 50mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 200mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 175mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 150mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 125mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
MR33 Verlengkabel RX 100mm incl. JR Plug - Zwart
€ 3,50
Praktische verlengkabel voor servo's of controllers met de normale, gemeenschappelijke JR-connector. Als de originele kabel te kort is en je niets wilt solderen, zijn deze kabels van MR33 de perfecte oplossing!
Verkrijgbaar in lengtes van 50mm, 75mm, 100mm, 125mm, 150mm, 175mm en 200mm!
TAMIYA A SET 4er Set Slick A 2x53433 2x 53435 1x54852
€ 53,60
€ 49,95
Tamiya Set van 4 Slick A
Artikelnummer: 53433-SET
EAN: 0086544915789
Omschrijving:
Set van 4 banden Slick A geschikt voor o.a. Tamiya Cup Euro TW.
Set bestaande uit:
- 2 x 53433 Slick A
- 2 x 53435 Insert hard
- 1 x 54852 1:10 Velgen (4) 18-Sp. Geel 24mm
Leveringsomvang:
- 1 Set Tamiya Set van 4 Slick A
SWORKz S35-4 1/8 4WD Off-Road Nitro Power Pro Buggy Kit
€ 699,95
Based on the latest SWORKz S35-GTE platform, SWORKz further developed and improved thenitro GT and came up with the S35-GT. The S35-GT is the ultimate SWORKz 1/8th nitro On-Road GT Car at this moment. Its front and rear suspension design is shared with the S35-GTE. The Ackermann steering system came directly from the 1/8th S35-3 nitro Buggy. A new center 2 speed on-road transmission system gives perfect acceleration to the S35-GT. The S35-GT newly designed arms are made from a strong nylon material. Optional carbon covers are available to adjust the arm’s stiffness for different tracks. The new unique front shock tower design allows to change the front upper angle position easily. The T-7075 aluminum chassis with its new design L.F.C (Lower Friction Coefficient) system will give more grip and at the same time less friction for the rear. A new radio tray system provides better and more precise throttle and braking response.
Features:
- New T7075 Hard Anodized, Lightend Aluminium Chassis
- New Wide Chassis Design
- New Lower Shock Towers
- New Shorter Shock Bodies
- New Shorter Shock Shafts
- New Shock Caps
- New Shorter Front Shock Springs
- New Fixed Shock Spring Holder
- New 3mm Updated Rear Shock Studs
- New Ackerman Plate
- New Steering System
- New Servo Saver Aluminium Part
- New Servo Saver Fixable Nut
- New Servo Saver Plate
- New Servo Saver Post Locking Design
- New Steering Balls
- New Steering Knuckle Plates
- New Updated Toe In Plates with Square Inserts
- New Lightweight Wing Mount
- New Side Guards
- New Lower Front and Rear Arms
- New Body Posts Front and Rear
- New Composite Rear Hubs with Carbon Plates
- New Multi Adjustable Ball System for Rear Upper Arms
- New Anticlock Screws for Shocks
- New Aerodinamically Optimized Body Shell
- 3 HET Differentials Included
- 2 Front Chassis Braces Included
- Black Competition Shock Springs Included
- Adjustable Wing Position
- Adjustable Wing Angle
- More Balance Weight Positions
- Stronger Downstop Area
- Optimized Composite Material
- Aluminium Parts in T7075
Specifications:
| Length | 510mm |
| Width | 308mm |
| Height | 220mm |
| Ground Clearance | 65mm |
| Wheelbase | 325-330mm |
| Track | F:304mm /R:306mm |
| Gear Ratio | C:47/13T, F/R:43/13T |
| Weight | 3400g (Race condition) |
Xray Stickers For Body 5 Different Colors, X397320 - 397320
€ 19,95
Xray Stickers For Body 5 Different Colors, X397320
Xray X4 Alu Steering Plate 7.5mm For Dual Steering - 302553
€ 33,95
Xray X4 Alu Steering Plate 7.5mm For Dual Steering
Connector : XT90I 2+2 with cap Female plug (5pcs)
€ 13,95
Connector : XT90I 2+2 with cap Female plug (5pcs)
Connector : Molex 2P Female plug with 100mm 22awg cable (1pcs)
€ 1,95
Connector : Molex 2P Female plug with 100mm 22awg cable (1pcs)
TAMIYA 22067 TH 10-spaaks wielen wit (24 mm breed, offset 0)
€ 7,99
- 10-spaaks schotelvelgen
- 0mm offset, 4 stuks
- voor 24 mm brede banden
- Compatibel met 1/10 toerwagens
TAMIYA Set van 4 Slick A 2x53433 2x53435 1x54850
€ 53,95
€ 49,95
Beschrijving:Set van 4 banden Slick A geschikt voor bijvoorbeeld Tamiya Cup Euro TW
Set bestaande uit:- 2 x 53433 Slick A
- 2 x 53435 Insert Hard
- 1 x 54850 1:
10 velgen (4) Y-Sp. Geel 24mm +
2 Leveringsomvang:
- 1 set Tamiya set van 4 Slick A
SKY-RC B6 Neo DC charger (200W)
€ 47,50
SkyRC's legendary iMax B6 charger was an iconic charger back in 2006, and now SkyRC is proud to introduce the next-generation B6neo. Almost 1/4 the size of its predecessor, smaller than a credit card, B6neo still packs a powerful punch. Unlike the rugged aluminium case of the B6, the B6neo features stunning color schemes in sleek plastic cases. When powered by DC, he can charge up to an impressive 200W, while it can handle up to 80W with USB PD input. This is a significant improvement over the B6, wich can only charge up to 50W on DC and does not support PD input. The B6neo features an XT60 interface as its DC input and a de-facto trendy type-C PD input interface, ensuring greater flexibility and convenience in charging your RC batteries The built-in balance port enables B6neo to discharge faster, allowing it to discharge at up to 24W when used in conjunction with the main port. In contrast, the discharge rate when using the main port alone is limited to just 10W When the balance port is connected, B6neo is a verstile battery checker capable of mesuring cell voltage and the balance state of LiPo, LiHV, LiFe and Lilon battery. The overall voltage and individual cell's voltage will be displayed on the fly to help tell wether the battery is charged or discharged and wether it requires balancing. It will work as a safeguard for batteries as for example LiPo battery is renowed for their high energy density and lightweight properties. Proper care and monitoring are crucial to ensure their safety and longevity. After clicks on the menu, B6neo is ready for your application, offering and optimal voltage of 5-27V with 0.1V increment, adjustable 1-10A current. Short circuit, overload and reverse polarity protection are all included The B6neo uses a proprietary rectifier circuit to efficiently convert DC into safe D/C power for battery charging. And its ontboard MCU precisley controls the charging to minimize power loss to create an incredibly compact form factor. Discover a new colorX interface introduced by B6neo based on simple and textured visuals. The tailor-designed light cyan and green color scheme are for RC charging, it helps you focus on the setting. The Web2.0 responsive menu and well-desiged icons make the operation more suitable for players accustomed to operating smartphones. Input voltage : DC : 10.0 -28.0 V PD3.0/QC : 12.0-20.0 v Input current : DC : 12 A PD : 5 A Max. output power : DC : 200 W PD : 80 W Charge current : 0.2 A-10.0 A Discharge current : Current : 0.1 A-2 A Power : 10 W (+-10%) Balance current : LiPo/LiFe/LiIon/LiHV : Max. 1500mA Size : 70 x 50 x 32 mm Weight : 82 gXT60 & trendy PD input
Discharging multiplied by balance port
Versatile 2in 1 check batteries easily
Charging but also can act as a digital power supply
Rectifier circuit effiency multiplied
Color X easy on the eyes
SKYRC BD350 BATTERY DISCHARGER & ANALYZER
€ 144,95
€ 139,95
De BD350 is compatibel met de meeste RC-batterijen en werkt met de SkyRC T1000-lader of D200 neo met een ontlaadstroom tot 40A en een ontlaadvermogen van 350W.De BD350 is meer dan alleen een batterijontlader. Bedrijfsspanning: gelijkstroom 5V Ontlaadvermogen: 350 W Ontlaadstroom: 0,1 – 40 A Bescherming tegen oververhitting: >95°C Bedrijfstemperatuur: 0°C ~ 40°C Luchtvochtigheid bij gebruik: 0% ~ 75% Middel: 157 * 105 * 93 mm Gewicht: 1224 gr
Het is een krachtig testinstrument dat de parameters van verschillende batterijen meet, plot en vergelijkt. Het meet nauwkeurig de batterijcapaciteit en prestaties. U hoeft niet meer te raden wanneer u de beste batterij voor RC-racen kiest!
Wanneer de SKY RC-ontlader en -lader samenwerken, kunnen ze het juiste Charger Master3-programma gebruiken om de ontladingscurve van de batterij in realtime te bekijken of te exporteren.
De ontladingscurves van verschillende batterijen kunnen worden uitgezet voor nauwkeurige vergelijking en analyse, zodat defecte batterijen zich nergens kunnen verbergen.
(SKY RC informeert ons dat de BD350 zou moeten werken met opladers van andere merken zoals I-Charger, maar we hebben het zelf niet gecontroleerd).
Hobbywing Seaking Cooling Tube 3660 For 540er Motor - 32366000
€ 13,95
Hobbywing Seaking Cooling Tube 3660 For 540er Motor
Hobbywing Ezrun Sl 56118sd G2 800kv 4pol, 8mm For 1:5 - 30402901
€ 224,95
Hobbywing Ezrun Sl 56118sd G2 800kv 4pol, 8mm For 1:5
Hudy Alu Countersunk Servo Shim - Black (10) - 296509-K
€ 9,95
Hudy Alu Countersunk Servo Shim - Black (10)
Xray Composite Steering Plate - Front/rear Mounting Positions - Graphite - 322573-G
€ 11,95
Xray Composite Steering Plate - Front/rear Mounting Positions - Graphite
Xray Xb8'23 Incl Fx K303 & 2169 Muffler - 1/8 Luxury Nitro Off-road Car Combo - 350018-C
€ 1.197,90
Xray Xb8'23 Incl Fx K303 & 2169 Muffler - 1/8 Luxury Nitro Off-road Car Combo
Xray 3bb Clutch Bell 14t - Lightweight + 3x Ball-bearing - 358414-L
€ 55,95
Xray 3bb Clutch Bell 14t - Lightweight + 3x Ball-bearing
Xray X4f'24 Graphite Upper Deck - Split Rear - 2.0mm - 301082
€ 32,95
Xray X4f'24 Graphite Upper Deck - Split Rear - 2.0mm
Xray X4f'24 Graphite Upper Deck - Split Front - 2.0mm - 301081
€ 32,95
Xray X4f'24 Graphite Upper Deck - Split Front - 2.0mm
Â