SkyRC Tire Sander Black

SMALL BODY CLIP 1/10 - FLUORESCENT RED (8)

SMALL BODY CLIP 1/10 - FLUORESCENT YELLOW (8)

SMALL BODY CLIP 1/10 - GLOSS BLACK (8)

SMALL BODY CLIP 1/10 - GOLD (8)

SMALL BODY CLIP 1/10 - METALLIC BLUE (8)

SMALL BODY CLIP 1/10 - METALLIC GREEN (8)

Soldeerbout 100W / 220V

oldeerbout 100W / 220V

- Vermogen 100W
- 220 Volt
- Word ca. 500°C warm

Sorex Glued 40R+Yellow+Stiff Light Pk4-Euros 2014

Great combo for high grip or big traction tarmac surfaces. Built with the 40R tyre, with a yellow insert and stiff light wheel.

Schumacher Racing have an automated in house gluing process which accurately controls the glue flow rate and quantity. This has helped us to establish an excellent reputation for quality and consistency of pre-glued tyres. However, the driver should check that the tyres are firmly glued before each race.

RUSH RC Tyres as used at the 2017 Japan Nationals. Pre-mounted and expertly glued with a medium moulded insert. The SPE36VR2 is a hardwearing and consistent tyre good for many runs without such significant drop off compared to other brands. Best practice to use thin carpet style additives with higher than normal warming temperatures before the run.

Speedmind Wheel Washer 4mm slim (2 pcs.)

SRT BH8015 Low Profile (0.055s/13.0kg/7.4V) Brushless Servo

roduct information "SRT Capacitor for BEC 2200uf/10V"

Whenever voltage dips and peaks are a problem, this capacitor with 2200uF/10V is the solution. It improves the voltage stability of the receiver and prevents short-term voltage drops that can be caused, for example, by peak loads from high-quality servos. The stored energy is used to bridge such drops. With reverse currents from servos, however, so-called voltage peaks can sometimes occur. The capacitor can filter out and cushion these high-frequency signals just as easily.

The capacitor is plugged into a free receiver slot.

SRT TRX5 25T 15-19mm Alu Servo Horn (Black)

SRT TRX6 25T 16-20mm Alu Servo Horn (Black)

SRT TRX7 25T 20-24mm Alu Servo Horn (Black)

A straight shaped Lexan scissors especially suited for cutting Lexan materials. It was made of stainless steel. Ergonomically shaped and easy to hold, the scissors help to cut bodywork the way you need it.

Technical Specifications

10 replacement super glue nozzles for fine gluing of tyres etc. Nozzle can be cut to suit amount of flow. Diameter of glue bottle it is suitable for is 4.25mm and below.

Based on the latest SWORKz S35-GTE platform, SWORKz further developed and improved thenitro GT and came up with the S35-GT. The S35-GT is the ultimate SWORKz 1/8th nitro On-Road GT Car at this moment. Its front and rear suspension design is shared with the S35-GTE. The Ackermann steering system came directly from the 1/8th S35-3 nitro Buggy. A new center 2 speed on-road transmission system gives perfect acceleration to the S35-GT. The S35-GT newly designed arms are made from a strong nylon material. Optional carbon covers are available to adjust the arm’s stiffness for different tracks. The new unique front shock tower design allows to change the front upper angle position easily. The T-7075 aluminum chassis with its new design L.F.C (Lower Friction Coefficient) system will give more grip and at the same time less friction for the rear. A new radio tray system provides better and more precise throttle and braking response.

Features:

• New T7075 Hard Anodized, Lightend Aluminium Chassis
• New Wide Chassis Design
• New Lower Shock Towers
• New Shorter Shock Bodies
• New Shorter Shock Shafts
• New Shock Caps
• New Shorter Front Shock Springs
• New Fixed Shock Spring Holder
• New 3mm Updated Rear Shock Studs
• New Ackerman Plate
• New Steering System
• New Servo Saver Aluminium Part
• New Servo Saver Fixable Nut
• New Servo Saver Plate
• New Servo Saver Post Locking Design
• New Steering Balls
• New Steering Knuckle Plates
• New Updated Toe In Plates with Square Inserts
• New Lightweight Wing Mount
• New Side Guards
• New Lower Front and Rear Arms
• New Body Posts Front and Rear
• New Composite Rear Hubs with Carbon Plates
• New Multi Adjustable Ball System for Rear Upper Arms
• New Anticlock Screws for Shocks
• New Aerodinamically Optimized Body Shell
• 3 HET Differentials Included
• 2 Front Chassis Braces Included
• Black Competition Shock Springs Included
• Adjustable Wing Position
• Adjustable Wing Angle
• More Balance Weight Positions
• Stronger Downstop Area
• Optimized Composite Material
• Aluminium Parts in T7075

Specifications: