XRAY T4 2021 Optionen

Xray Alu Shim For Lower Susp. Holder 3x7.5x1.5 - Black (10), X303134-k

Xray Alu Shim For Lower Susp. Holder 3x7.5x1.5 (10), X303134

Xray ALU SHOCK CAP-NUT WITH VENT HOLE - BLACK (2)

Xray Alu Steering Block - Black - Swiss 7075 T6

Alu steering blocks with ultra-strong construction provides very long life and durability in even the most extreme racing conditions. Composite bushings are used to secure the ball-bearings in both sides of this steering block; this allows the ball-bearings to fit perfectly and turn freely, giving much higher lifetime compared to bearings installed directly into aluminum steering blocks. CNC-machined from premium lightweight T6 aluminum. Black coated. Set of Left and Right steering block.

Alu steering block is recommended for high traction conditions as it improves stability and makes the car turn smoother. The alu steering block is recommended for ARS as well as it allows greater toe in-out gain adjustment possibilities.

The graphite extensions mount to the steering block. Features same ackermann position as the standard composite steering block. The extension is can be mount either from the top or bottom.

XRAY Alu Wheel Hub Offset -0.75mm (2) - black - 305351

 

XRAY Alu Wheel Hub Offset +0.75mm (2) - black - 305352

XRAY Alu Wheel Hub Offset +1.5mm (2) - black - 305353

XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR - BLACK (4) - 308031-K

XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR - ORANGE (4) - 308031-O

XRAY ALU XRAY SHOCK SPRING RETAINING COLLAR (4) - 308031

XRAY ANTI-ROLL BAR FOR BALL BEARINGS - REAR 1.1 MM - 303801

XRAY ANTI-ROLL BAR FOR BALL BEARINGS - REAR 1.2 MM - 303802

XRAY ANTI-ROLL BAR FOR BALL BEARINGS - REAR 1.4 MM - 303804

XRAY ANTI-ROLL BAR FOR BALL BEARINGS - REAR 1.5 MM - 303805

XRAY ANTI-ROLL BAR FOR BALL BEARINGS - REAR 1.6 MM - 303806

XRAY ARS - ACTIVE REAR SUSPENSION ARM - GRAPHITE - 1-HOLE - 303171

Xray Ball End 4.9mm With Thread 10mm (2), X302655

Xray Ball-bearing 1.5x4x2 Steel Sealed - Oil (4)

XRAY Belt Tensioner Set - 303071

XRAY Composite Ball Joint 4.9Mm - Closed With Hole (4) - 302665

XRAY Composite C-Hub Bushing (2+2)

XRAY COMPOSITE C-HUB LEFT - 0 DEG. - GRAPHITE (ECS) - 302380

XRAY COMPOSITE C-HUB LEFT - 0 DEG. - HARD (ECS) - 302370

XRAY COMPOSITE C-HUB LEFT - 0° DEG.- MEDIUM (ECS) - 302360

XRAY COMPOSITE C-HUB LEFT - 4 DEG. - GRAPHITE (ECS) - 302384

XRAY COMPOSITE C-HUB LEFT - 4 DEG. . - HARD (ECS) - 302374

XRAY COMPOSITE C-HUB LEFT - 6 DEG. - HARD (ECS) - 302376

XRAY COMPOSITE C-HUB RIGHT - 0 DEG . - GRAPHITE (ECS) - 302379

XRAY COMPOSITE C-HUB RIGHT - 0 DEG . - HARD (ECS) - 302369

XRAY COMPOSITE C-HUB RIGHT - 0> DEG. - MEDIUM (ECS) - 302359

XRAY COMPOSITE C-HUB RIGHT - 4 DEG - GRAPHITE (ECS) - 302383

XRAY COMPOSITE C-HUB RIGHT - 4 DEG - HARD (ECS) - 302373

XRAY COMPOSITE C-HUB RIGHT - 6 DEG - HARD (ECS) - 302375

XRAY COMPOSITE C-HUB RIGHT - 6 DEG - MEDIUM (ECS) - 302365

Front eccentric body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Front eccentric body mount set with 6mm-thick +2mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height. There are two optional body height adjustable mounts available: either +1mm or +2mm.

XRAY COMPOSITE PROGRESSIVE PISTONS (4) - 308038

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Composite body back stop set for 1/10 touring cars (electric or nitro), made from lightweight composite material, provides support for the rear of body shell to prevent tucking under the rear wheels due to a collision from the rear, thus reducing lost racing time and increasing body lifespan. Posts are quickly & easily mounted, and are trimmmable for perfect fitment. Set of two, includes mounting hardware.

XRAY COMPOSITE STEERING BLOCK - GRAPHITE - 302254

XRAY Composite Upright 0> Outboard Toe-In - 1-Hole - Hard - Rubber - 303364

XRAY Composite Upright 0> Outboard Toe-In - 1-Hole - Medium - Rubber - 303362

XRAY COMPOSITE UPRIGHT 0deg OUTBOARD TOE-IN - GRAPHITE - 303360

Xray Cvd Bb Drive Shaft 50mm - Hudy Spring Steel (2)

Xray Cvd Bb Drive Shaft 50mm - Hudy Spring Steel- Set

XRAY Drive Shaft Replacement Plastic Cap 3.5 MM - Orange - Strong - 305242

Xray E-clip 1.2 (10)

Xray Ecs (es) Drive Shaft 50mm For 2mm Pin - Hudy Spring Ste (1), X305223