Es gibt keine Produkte in Ihrem Warenkorb.
Setup
Wird geladen ...
Hudy Quick-Tweak Station + Alu Carry Case - 107904
Correct tweak is one of the most important concerns that influences the overall performance of the car; a badly tweak car has a very negative impact on a car's handling. As such, checking and correcting tweak is a very important matter; pro racers check for tweak a number of times after each run.
The HUDY Quick-Tweak Station allows you to quickly and easily check and correct tweak on your race car to help ensure proper, consistent handling.
Setting up an RC racecar is necessary to make the car perform well. Aside from tweak there are numerous other set-up adjustments that can be made (depending on the type of car) such as camber, caster, toe, ride height, downstops, and many others. Car setup is a complex matter, as all adjustments interact. Fine-tuning the set-up will make your car faster and often easier to drive near its performance limit. This means that all the effort you put into your car in preparing it and optimizing the setup will pay off in better results and more satisfaction. The HUDY Quick Tweak Station fits 1/10 and 1/12 on-road cars thanks to its unique adjustable base plate system. Adjustable threaded support feet allow for quick & easy leveling. Rugged and lightweight base plates are CNC-machined from strong yet lightweight aluminum and black-coated for durability and stylish looks.
Strategically milled-out cavities in the base plates make the HUDY Quick Tweak Station much lighter than other similar products on the market; both left and right sides are identically weighted for perfect balance. Areas around the precision spirit level in the pivoting base plate are milled out to allow easy viewing from any position. Laser-engraved track-width markings (160-220mm) are precisely & accurately engraved on the base plates. The center axle is specially ground to be perfectly straight & level with ends additionally hand ground for precision fitment into the manually-selected precision ball-bearings that are pressed into the base plates. The ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation. All of these features combine to make a very lightweight and responsive precision instrument that is exceptionally sensitive to detecting even small amounts of tweak.
The HUDY Quick Tweak Station comes in an exclusive aluminum carrying case with precut foam inserts to allow easy & safe storage.
. Universal station fits all 1/10 on-road cars; the fixed base plate can be moved along the center axle to shorten the Quick-Tweak Station for measuring 1/12 cars as well
. Super-lightweight and responsive precision instrument, exceptionally sensitive to detect even small amounts of tweak
. Ball-bearing supported featuring manually-selected bearings which are precisely pressed into the base plates to ensure freely-rotating, bind-free movement
. Ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation, to easily detect any small amounts of tweak
. Base plates are CNC machined from strong yet lightweight aluminum; specially milled-out cavities in the bottom of each base plate give ultra lightness; both left and right sides are identically weighted for perfect balance
. Base plates are black coated for protection and stylish look, additionally laser engraved with precise & accurate track-width scale between 160-220mm
. Three adjustable threaded feet allow easy level adjustment
. Pivoting base plate features a precise spirit level; material is milled out from around the spirit level to allow you to easily view the bubble from any position even with a car being positioned on the tweak station
HUDY QUICK-TWEAK STATION 1/8 & 1/10 ON-ROAD - 107903
Having the proper tweak is one of the most important factors that influences a car’s overall performance; a badly-tweaked car has a very negative impact on a car's handling. Checking and correcting tweak is very important; pro racers check for tweak a number of times after each run.
The HUDY Quick-Tweak Station allows you to quickly and easily check and correct tweak on your race car to help ensure proper, consistent handling.
The HUDY Quick Tweak Station fits 1/10 and 1/8 on-road cars thanks to its unique adjustable base plate system. This universal tweak station works with all nitro on-road cars.
Adjustable threaded support feet allow for quick & easy leveling. Rugged and lightweight base plates are CNC-machined from strong yet lightweight aluminum, and black-coated for durability and stylish looks.
Strategically milled cavities in the base plates make the HUDY Quick Tweak Station much lighter than other similar products on the market; both left and right sides are identically weighted for perfect balance. Areas around the precision spirit level in the pivoting base plate are milled out to allow easy viewing from any position. Laser-engraved track-width markings (180-310mm) are precisely & accurately laser engraved on the base plates. The center axle is specially ground to be perfectly straight and level, with ends additionally hand ground for precision fitment into the manually-selected precision ball-bearings that are pressed into the base plates. The ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation. All of these features combine to make a very lightweight and responsive precision instrument that is exceptionally sensitive to detecting even small amounts of tweak.
The HUDY Quick Tweak Station comes in an exclusive aluminum carrying case with precut foam inserts to allow easy & safe storage.
• Universal tweak station fits all 1/10 and 1/8 on-road cars; the fixed base plate can be moved along the center axle to shorten the Quick-Tweak Station as required.
• Super-lightweight and responsive precision instrument, exceptionally sensitive to detect even small amounts of tweak.
• Ball-bearing supported, featuring manually-selected ball-bearings which are precisely pressed into the base plates to ensure freely-rotating, bind-free movement.
• Ball-bearings are degreased and lightly oiled with AeroShell 12T fluid for ultra-free and smooth operation, to easily detect any small amounts of tweak.
• Base plates are CNC machined from strong yet lightweight aluminum; specially milled cavities in the bottom of each base plate give ultra-lightness; both left & right sides are identically weighted for perfect balance.
• Base plates are black-coated for protection and stylish look, additionally laser engraved with precise & accurate track-width scale between 180-310mm.
• Three adjustable threaded feet allow easy level adjustment.
• Pivoting base plate features a precise spirit level; material is milled out from around the spirit level to allow you to easily view the bubble from any position even with a car being positioned on the tweak station.Exclusive aluminum carrying case with precut foam inserts for safe transport and storage.
Hudy Replaceable Hobby Knife Blades (10pcs) - 188984
Hudy Replaceable Hobby Knife Blades (10pcs)
Hudy Ride Height Gauge 0 Mm To 15 Mm (beveled), H107715 - 107715
Hudy Ride Height Gauge 0 Mm To 15 Mm (beveled), H107715
HUDY Ride Height Gauge Stepped 1/10 & 1/12 Pan Cars - 107718
Highly-accurate precision stepped ride height gauge for checking the ride height of 1/10 & 1/12 pan cars. Stepped surfaces in the 2.6-5.6mm range have 0.2mm increments for fine adjustment. CNC-machined, premium-quality lightweight duraluminum is black elox-coating for smooth, long-lasting finish and stylish look. Laser engraved with HUDY logo and scale
HUDY RIDE HEIGHT TOOL 14-20MM - 107740
|
HUDY RIDE HEIGHT TOOL 20-30MM - 107742
|
Hudy Rubber Transmition Belt For 10 3100 (3) - 103059
Hudy Rubber Transmition Belt For 10 3100 (3) - 103059
Hudy Self-adhesive Foam Strip (2), H107871 - 107871
Hudy Self-adhesive Foam Strip (2), H107871
Hudy Set-up Bag For 1/10 & 1/8 Off-road Cars & Gt - 199241
Hudy Set-up Bag For 1/10 & 1/8 Off-road Cars & Gt
Hudy Set-up Bag For 1/10 Touring Cars, 1/10 & 1/12 Pan Cars, 1/10 Formula - 199221
Hudy Set-up Bag For 1/10 Touring Cars, 1/10 & 1/12 Pan Cars, 1/10 Formula
HUDY SET-UP BOARD BAG 1/10 & 1/12 ON-ROAD - 199210
HUDY SET-UP BOARD BAG 1/10 & 1/12 ON-ROAD - 199210
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/8 Off-road Cars - 108851
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/8 Off-road Cars
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 & 1/12 Pan Cars - 109451
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 & 1/12 Pan Cars
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 Formula Cars - 109551
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 Formula Cars
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 Off-road Cars - 108951
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 Off-road Cars
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 Touring Cars - 109351
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/10 Touring Cars
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/8 Gt - 109651
Hudy Set-up Station & Set-up Tools + Carrying Bag For 1/8 Gt
Hudy Set-up Station For 1/10 & 1/12 Pan Cars - 109401
Hudy Set-up Station For 1/10 & 1/12 Pan Cars
Hudy Set-up Station For 1/10 Formula Cars - 109501
Hudy Set-up Station For 1/10 Formula Cars
Hudy Set-up Station For 1/10 Off-road Cars - 108901
Hudy Set-up Station For 1/10 Off-road Cars
HUDY SET-UP STATION FOR 1/10 TOURING CARS nu tijdelijk met GRATIS 3D setup tool houder.
HUDY SET-UP STATION FOR 1/10 TOURING CARS
Hudy Set-up Station For 1/8 Off-road Cars & Truggy - 108801
Hudy Set-up Station For 1/8 Off-road Cars & Truggy
Hudy Slot Tire Truer Axle 1:8 + 3:32 + Motor Frs + Cable, H103100 - 103100
Hudy Slot Tire Truer Axle 1:8 + 3:32 + Motor Frs + Cable, H103100
Hudy Titan Ball Stud D=4.9 / L=8 / S=3.5 / 2mm Hex (2) - 990008
Hudy Titan Ball Stud D=4.9 / L=8 / S=3.5 / 2mm Hex (2)
Hudy Titan Pivot Ball D=4.9 / S=3.5 / 3mm Hex (2) - 990101
Hudy Titan Pivot Ball D=4.9 / S=3.5 / 3mm Hex (2)
HUDY Touring Car Stand - 108150
HUDY stylish touring car stand for 1/10 electric and nitro touring cars. Very nice and clean smooth design. The surface is black powder coated for maximum long life and to withstand abusive working conditions. This stand has a very small footprint and is very low profile, making it very handy to pack for travel. |
Four rubber feet ensure that the stand will stay firmly in place and not move while working on the car. Two super-soft foam strips bonded to the top surface ensure that the car will sit softly and will not move while you’re working on it. Laser-engraved HUDY logos adorn the stylish black powder coated surface. |
Four strategically placed holes on the top of the stand provide a secure placement for shocks during rebuilds. The holes are additionally laser-engraved with FL, FR, RL, and RR symbols to allow easy recognition of the different shocks to ensure you can easily identify the shocks. |
HUDY Ultimate Digital Pocket Scale 300g 0.01g - 107865
With weight measurement and management being critical for modern RC cars (considering the abundance of strict racing regulations), the new HUDY Pocket Scale represents a new level of sophistication in precision and high-tolerance electronics (0.01g/0.001oz) for the most detail-oriented racer. |
Compact and light and powered by easy-to-obtain AAA batteries (not included), the Pocket Scale provides the means for highly accurate and precise weight measurement on your workbench or in your pit at any race from club-level to international-level. From chassis trim weight measurement (to ensure adherence to racing regulations) to tire weight measurement (to balance the four corners of your on-road or off-road vehicle), the Pocket Scale offers easy-to-use and intuitive controls, auto-calibration, and an easy-to-read backlit LCD display. Whether it be static weighing or tare weighing, the HUDY Pocket Scale is a high-precision instrument to enhance your racing experience. |
Note: Batteries are not included. |
Hudy Universal Exclusive Set-up System For 1:10 Formula Cars, H109306 - 109306
Hudy Universal Exclusive Set-up System For 1:10 Formula Cars, H109306
Hudy Upside Measure Plate For 1:8 Truggy, H108841 - 108841
Hudy Upside Measure Plate For 1:8 Truggy, H108841
Hudy Upside Measure Plate: Touring Cars 1:10, H109340 - 109340
Hudy Upside Measure Plate: Touring Cars 1:10, H109340
Hudy Vacuum Pump Post & Shock Holder - 1/10 Off-road - 104061
Hudy Vacuum Pump Post & Shock Holder - 1/10 Off-road
Hudy Vacuum Pump Post & Shock Holder - On-road - 104060
Hudy Vacuum Pump Post & Shock Holder - On-road
Hudy Wa-cb 1:10 Serpent,picco,mugen, H102312 - 102312
Hudy Wa-cb 1:10 Serpent,picco,mugen, H102312