Es gibt keine Produkte in Ihrem Warenkorb.
Neu
Â
28 / 73
Wird geladen ...
RC Car Colours Lexan Fluo Deep Orange nr1011 150ml
€ 6,50
RC Car Colours Lexan Fluo Deep Orange nr1011 150ml
RC Car Colours Lexan Fluo Deep Red nr1010 150ml
€ 6,50
RC Car Colours Lexan Fluo Deep Red nr1010 150ml
RC Car Colours Lexan Cuypers Pink nr1009 150ml
€ 6,50
RC Car Colours Lexan Cuypers Pink nr1009 150ml
Rockamp Damper Tang
€ 16,95
Working on the shock absorbers is comparatively easy with these pliers. Thanks to the light and multifunctional design, there are several ways to use the pliers, for example to remove the ball shells. In addition, the material prevents damage and scratches on the shock absorbers.
Technical Specifications
| Length: | 151mm |
| Width: | 37.5mm |
| Height: | 9.1mm |
| Weight: | 70g |
LANGE LIJMNAALDEN SET 5 STUKS MMC
€ 3,95
LANGE LIJMNAALDEN SET 5 STUKS MMC
VOOR BV BANDEN TE LIJMEN.
ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR - 7075 T6
€ 36,95
ALU REAR ROLL-CENTER HOLDER FOR ANTI-ROLL BAR - 7075 T6
Hobbywing Xerun Bandit Brushless Motor G4 13.5T 3200kV
€ 123,95
Product information "Hobbywing Xerun Bandit Brushless Motor G4 13.5T 3200kV"
Those who are eager for high torque performance in 1/10 Outlaw competitions will make the right choice with the Xerun Bandit G4 motor series. This motor proves to be up to 18% more powerful and 12% more efficient compared to its G2R predecessor. With the fully adjustable timing ranging from 20 to 60 degrees, the full potential of the Bandit G4 is unleashed. The motor adopts a fully exposed stator core structure, meaning that the outer stator core is directly exposed to maximize heat dissipation performance.
Features:
- More power than the Xerun Bandit G2R series
- Dual sensor design for optimal wiring in RC car
- New motor housing with optimized cooling openings
- Adjustable timing from 20-60°
- High-precision manufactured rotor (5-13.9*24.1-AUS)
- High temperature tolerance of the winding
- Easily disassembled for maintenance
Technical Specifications:
| Winding: | 13.5T |
| Type: | Sensored Brushless |
| kV Rating: | 3200KV |
| Max. Power Output: | 387W |
| Max. Current: | 48A |
| No-Load Current: | 5.13A |
| LiPo Cells: | 2-3S |
| Poles: | 2 |
| Timing (adjustable): | 20-60° |
| Diameter: | 35.8mm |
| Length: | 53.9mm |
| Shaft Diameter: | 3.175mm |
| Shaft Length: | 14mm |
| Weight: | 187.6g |
| Application: | 1/10 Stock, Outlaw Races |
Delivery:
1x Xerun Bandit G4-Motor "13.5T", Type "Torque"
1x Sensor cable
1x Manual
TAMIYA Body set Volkswagen Golf II GTI 16V Rally met certificaat
€ 42,50
Body set Volkswagen Golf II GTI 16V Rally met certificaat
UV LIJMKIT SET MMC
€ 14,95
UV LIJM KIT MET STERKE UV 8 LED LAMP
VOOR HET REAPAREREN VAN BODY'S
EN VOOR DIV LIJM KLUSSEN.
TAMIYA RM01 3x31mm Titanium Coated King Pin (2)
€ 12,50
RM01 3x31mm Titanium Coated King Pin (2)
Deze king-pins hebben een duurzame titanium coating om het soepel laten bewegen van de Uprights te verhogen.
Specificaties en functies:
- 3x31mm Titanium Coated King Pin x 2
- Compatibel met RM-01 chassis.
Tamiya nummer: 54355
MASTER GigaProp 6 Set (Mode 2 + 4)PICHLER
€ 139,95
MASTER GigaProp 6 Set (Mode 2 + 4)
De telemetrie 6-kanaals afstandsbediening MASTER GigaProp 6 wordt gekenmerkt door zijn gebruiksgemak en heeft diverse instellingen voor b.v. electronische mixer en speciale programma´s. Het grote, hoog display kan eenvoudig worden afgelezen, zelfs in fel zonlicht. De zender is zeer smal (slechts 40 mm) en ligt dus goed in de hand.
bestek
- Radio systeem: 2.4Ghz
- 6 Kanalen
- Telemetrie: geïntegreerd (optionele sensors, zie onder "Speciale toebehoren")
MASTER zender GigaProp 6
- 6 Kanalen
- Zendvermogen: <20 dBm
- RF kanalen: 140
- Bandbreedte: 500kHz
- Resolutie: 4096 stappen
- Alarm niveau als de accuspanning <4.2V
- Gewicht zender. ongeveer 405g
- Afmetingen zender: 200 x 170 x 40mm
- Scherm afmetingen: 73 x 39mm, 128 x 64 pixels
- Model geheugen: 20
- Trim: Digital
- Display: LCD / STN Transflectief achtergrondverlichting
- Spanning: 6V DC 1.5AA x4 (NiMH of alkaline, niet meegeleverd)
- Behuizing: stevig ABS
- Sender software: te updaten
- Sticks: aluminium, in lengte verstelbaar
- Stick Mode: Zelfs met terugwerkende kracht van mode 2/4 (gas links) naar mode 1/3 (gas rechts) ombouwbaar
Ontvanger MASTER 6K Telemetrie
- 6 Kanalen
- Afmetingen (L / B / H): 48 x 26 x 10 / 15mm
- Gewicht: 14g
- RF Gevoeligheid: -105dBm
- Bedrijfsspanning: 4,0 .. 6.5V DC
- Resolutie: 1024 stappen
Leveromvang:
- 1x zender MASTER GigaProp 6
- 1x Receiver MASTER 6K Telemetrie
- Binding plug
- USB-aansluitkabel
- Handleiding Duits, Engels
optionele accessoires
- NiMH-accu 1,2V 2550mAh, 950010
- Spanning sensor (tot 100V), C8960
- Temperatuur sensor (tot 250 ° C), C8959
- RPM sensor optisch (. 60.000 omw./min) C8958
- RPM sensor magnetisch (. 60.000 omw./min) C8957
- Vario-sensor, C9024
- IBus module, C8961
- Ontvanger MASTER 6K Telemetrie, C8962
- Leraar / leerling-kabel, C9020
- Flight Simulator Aansluitset voor PC / USB-poort, C6099
Om de zender te bedienen zijn 4 stuks gewone AA batterijen nodig of 4x NiMh 1,2V 2550mAh (niet inbegrepen).
Pichler nummer: C8802
1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR ABSIMA
€ 289,95
The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.
- NEW* 60A brushless speed controller with T connector and 3421KV motor
- NEW* Programmable speed controller
- NEW* 15 kg steering servo with metal gear
- NEW* LED lighting
- NEW* Monster Truck body with many add-on parts
- NEW* even more option parts available
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.
The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands.
The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.
4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
- 4WD all wheel drive
- 2.4GHz 4-channel radio system
- 60A brushless speed controller (waterproof; T plug; programmable)
- 3421KV brushless motor (sensorless; splash-proof)
- 15kg metal gear steering servo (25T; ball bearings)
- 8 Aluminium oil shock absorbers
- Ball bearing main drive
- Extremely durable composite plastic parts
- Steel differential outdrives
- Aluminium main drive shaft with steel mounts
- Adjustable upper tie rods
- 5mm aluminium engine mount
- 6mm shock towers
- 2 differentials (front/rear)
- Stylish Monster Truck body with add-on parts
- "Light-Weight" chassis (less weight - longer driving time)
- Many aluminum option parts available
- Scale: 1:10
- Dimensions (L/W/H): 425x300x200 mm
- Weight: 2090g
- Wheelbase: 270mm
- Ground clearance: approx. 45mm
- Track width: 250mm front/rear
- Wheels front/rear: Ø 116mm / Width: 57mm
- Shock absorber oil: 400CPS
- Shock absorber installation length: 100mm
- Motor ratio: 17T / main gear: 64T (module 0.6)
- 1/10 Brushless Monster Truck "AMT3.4BLV2" RTR
- 2.4GHz CR4S radio
- Sticker sheet
- Manual
- 4 AA batteries for radio
- 7.4V/2S LiPo car battery
- Charger (suitable for car battery)
- Programming box for individual settings of the speed controller
1:10 EP Truggy "AT3.4-V2 KIT" 4WD KIT ABSIMA
€ 109,95
The success story continues! We have equipped the AT3.4 "V2" KIT with some new features that take the vehicle to the next evolutionary stage
Some technical changes have been made to our 1:10 Truggy - among other things, the vehicle now comes with LED lighting on the roof
- NEW* Body in new race design
- NEW* LED lighting
- NEW* Downforce rear wing
- NEW* even more tuning parts available
The KIT version is a kit that can be assembled with standard tools such as pliers and screwdrivers. Shock absorbers and gearbox units are already pre-assembled so that even children can build this vehicle under parental supervision. You can also decide for yourself which electronic components should be installed in the vehicle. The kit includes 2 gear units - a copper/plastic version with the gear ratio for brushed motors and a full metal version designed for a brushless drive. This means that there are no limits to the motorization.
- 4WD all-wheel drive
- 4 oil shock absorbers
- Ball bearing main drive
- Extremely durable composite plastic parts
- Steel differential outlets
- Aluminum main drive shaft with steel mounts
- Adjustable upper tie rods
- 5mm aluminum motor mount
- 6mm shock towers
- 2 differentials (front/rear)
- Stylish Truggy body with add-on parts
- "Light-Weight" chassis (less weight - longer driving time)
- Many aluminum tuning parts available
- Scale 1:10
- Dimensions (L/W/H): 405x325x165 mm
- Weight: 1180g
- Wheelbase: 270mm
- Ground clearance: approx. 35mm
- Track width: 270mm front/rear
- Wheels: Ø 105mm / width: 55mm
- Shock absorber oil: 400CPS
- Installation length of the shock absorbers: 90mm
- Gear ratio BRUSHED version: pinion: 18T / main gear: 64T (module 0.6)
- Gear ratio BRUSHLESS version: pinion: 23T / main gear: 64T (module 0.6)
- 1/10 Truggy "AT3.4V2" KIT version
- Sticker sheet
- Manual
- Radio and receiver
- Speed controller and motor (brushed or brushless)
- Steering servo with 25T
- Drive battery (7.2V NiMH or 7.4V/2S LiPo battery)
- Charger (suitable for the drive battery)
- Programming card (optional for individual settings of the speed controller)
- 4* AA batteries for the remote control
Alu 7075 T6 wheel hubs offset +2.00mm 1:10 (2)ABSIMA
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
â—Ź 2pcs. wheel adapter
â—Ź Absima sticker sheetAvailable in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
â—Ź 2pcs. wheel adapter
Alu 7075 T6 wheel hubs offset +1.50mm 1:10 (2)ABSIMA
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
â—Ź 2pcs. wheel adapter
â—Ź Absima sticker sheetAvailable in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
â—Ź 2pcs. wheel adapter
Alu 7075 T6 wheel hubs offset +0.75mm 1:10 (2)ABSIMA
€ 11,00
Absima presents new „lightweight" 12mm aluminum 7075 T6 wheel hubs.
Available in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
â—Ź 2pcs. wheel adapter
â—Ź Absima sticker sheetAvailable in different width, to change the track.
The gun-metal anodized offset wheel hubs are available from -0.75mm up to +3.00mm.
Scope of delivery:
â—Ź 2pcs. wheel adapter
1:10 Screw set ABSIMA
€ 11,95
Features: All common screws you need for a 1/10 scale car.
Contains:
- 10 x Set screw M3*3
- 10 x Set screw M3*10
- 10 x Countersunk screw M3*8
- 10 x Countersunk screw M3*10
- 10 x Countersunk screw M3*16
- 10 x Roundhead screw M3*8
- 10 x Roundhead screw M3*10
- 10 x Roundhead screw M3*12
- 10 x Roundhead screw M3*16
- 10 x Nuts M3
1:16 EP BL Touring Car "FUN MAKER" neon genesis RTR ABSIMA
€ 189,95
Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!
This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired!
The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience.
Short and sweet: This little powerhouse lies on the road like a board !
HIGHLIGHTS:
- Aluminum chassis for excellent handling characteristics
- Powered by a powerful 380 brushless motor
- High performance differentials on front and rear axle
- Independent suspension for exceptional handling
- Intricately designed, multi-piece bodyshell
- Speed: +/- 40 km/h
The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.
CHASSIS PERFORMANCE:
Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!
Basically, the structure and arrangement of the components is like a 1:10 competition touring car:
- Independent suspension
- CVD front driveshafts
- Differentials with aluminum pinion gears (38Z) and pinion gears (14Z)
- Differential gears made of polyamide (12Z/24Z)
- Aluminum drive bones on rear axle
- Aluminum "big-bore" shock absorbers
DRIVE UNIT:
a plenty of power for that scale!
Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger included
REMOTE CONTROL & STEERING:
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface!
FEATURES:
- 4WD All Wheel Drive
- 2.4GHz remote control
- Full ball bearing drive
- Aluminum chassis, upper deck and shock towers
- Aluminum "big bore" shock absorbers
- CVD axles on front axle
- Heavy duty front & rear differentials
- Aluminum propshaft
- LED lighting front & rear
- Extremely detailed body with sticker sheet
- Scale: 1:16
- Dimensions: (L/W/H): 310x140x80mm)
- Weight (without battery): 560gr
- Wheelbase: 175mm
- Ground clearance: approx. 6mm
- Track width: 110mm front / 115mm rear
- Wheels front/rear: Ø 50mm / Width: 18mm
- Damper filled: Yes (100CPS)
- Damper installation length: 38mm
- Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)
- 1:16 Touring Car RTR
- 2.4GHz remote control
- 1500mAh LiPo battery
- 800mAh LiPo fast charger
- Sticker sheet
- Manual
REQUIRED ACCESSORIES:
- 2* AA batteries for remote control
1:16 EP BL Touring Car "FUN MAKER" stars'n grey RTR absima
€ 189,95
REMOTE CONTROL & STEERING:
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface!
FEATURES:
- 4WD All Wheel Drive
- 2.4GHz remote control
- Full ball bearing drive
- Aluminum chassis, upper deck and shock towers
- Aluminum "big bore" shock absorbers
- CVD axles on front axle
- Heavy duty front & rear differentials
- Aluminum propshaft
- LED lighting front & rear
- Extremely detailed body with sticker sheet
- Scale: 1:16
- Dimensions: (L/W/H): 310x140x80mm)
- Weight (without battery): 560gr
- Wheelbase: 175mm
- Ground clearance: approx. 6mm
- Track width: 110mm front / 115mm rear
- Wheels front/rear: Ø 50mm / Width: 18mm
- Damper filled: Yes (100CPS)
- Damper installation length: 38mm
- Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)
- 1:16 Touring Car RTR
- 2.4GHz remote control
- 1500mAh LiPo battery
- 800mAh LiPo fast charger
- Sticker sheet
- Manual
REQUIRED ACCESSORIES:
- 2* AA batteries for remote control
10 EP Buggy "AB3.4-V2" 4WD RTR absima
€ 149,95
- NEW* 80A brushed speed controller withT-connector and 540 motor
- NEW* Programmable speed controller
- NEW* 6kg steering servo
- NEW* LED lighting
- NEW* Downforce rear wing
- NEW* even more option parts available
6-Channel Receiver "R6WP" 2.4 GHz (for CR6S)
€ 25,95
SPECIFICATION:
-
Channel: 6CH Receiver
- Receiver size (L/W/H): 35x20x13mm
- Receiver operating current: 30mA
- Receiver voltage range: 3.3-10V
-
Supports high voltage servos
-
Water-proof
-
Stable distance control up to 200 meters
-
Only suitable for "CR6S" radio (2000009)
Team Titan Blitz Pista 1:10 GT Body 0,7mm (clear) 190mm
€ 29,95
Team Titan Blitz Pista 1:10 GT Body 0,7mm (clear) 190mm
BLITZ PISTA-10 - 1/10 GT - (190mm) (0,7mm)
De BLITZ PISTA-10 2-deurs GT body is ontworpen voor alle 1/10 190mm elektrische toerwagens. De aërodynamische high performance body biedt een zeer goede look en makkelijke besturing voor alle bestuurders.
De achtervleugel heeft 2 lijnen en de coureur kan kiezen tussen een hogere of lagere vleugel. De hogere vleugel geeft meer stabiliteit en de lagere vleugel kan de auto beter laten sturen.
De PISTA-10 heeft ook een standaard gewicht en een lichtgewicht versie met 0,5 mm specificaties.
De PISTA-10 body bevat een raammasker en een lichtgewicht sticker.
Technische specificatie
| Onroad: | Toerwagen |
| Dikte: | 0,7 mm |
Team Titan Blitz Pista 1:10 GT Body 0,5mm (clear) 190mm
€ 29,95
Team Titan Blitz Pista 1:10 GT Body 0,5mm (clear) 190mm
BLITZ PISTA-10 - 1/10 GT - (190mm) (0,5mm)
De BLITZ PISTA-10 2-deurs GT body is ontworpen voor alle 1/10 190mm elektrische toerwagens. De aerodynamische high performance body biedt een zeer goede look en makkelijke besturing voor alle bestuurders.
De achtervleugel heeft 2 uitgesneden lijnen en de bestuurder kan kiezen tussen een hogere of lagere vleugel. De hogere vleugel geeft meer stabiliteit en de lagere vleugel kan de auto beter laten sturen.
De PISTA-10 body wordt geleverd met een raammasker en een lichtsticker.
Technische specificatie
| Onroad: | Toerwagen |
| Dikte: | 0,5 mm |
PIPAero e-TCR24 FWD Body (clear) 0,7mm
€ 39,95
De e-TCR24 is de eerste FWD body van PIPAero.
De zeer ervaren RC-coureur Silvio Piperato zit achter dit merk en heeft zich ten doel gesteld om top body's te produceren voor de competitie.
De e-TCR24 wordt geleverd met voorruitmaskers en decal sheet en is verkrijgbaar in een 0,5mm en 0,7mm versie (materiaaldikte)!
Technische specificatie
| Onroad: | Front Wheel Drive FWD |
| Dikte: | 0,7 mm |
PIPAero e-TCR24 FWD Body (clear) 0,5mm
€ 39,95
De e-TCR24 is de eerste FWD body van PIPAero.
De zeer ervaren RC-coureur Silvio Piperato zit achter dit merk en heeft zich ten doel gesteld om top body's te produceren voor de competitie.
De e-TCR24 wordt geleverd inclusief voorruitmaskers en decal sheet en is verkrijgbaar in een 0,5mm en 0,7mm versie (materiaaldikte)!
Technische specificatie
| Onroad: | Front Wheel Drive FWD |
| Dikte: | 0,5 mm |
ORCA Blitreme 2 Brushless Motor 21.5T (ETS APPROVED)
€ 109,95
De ORCA 21.5T Blitreme2 borstelloze motor in combinatie met de ORCA BP1001 Blinky Pro controller zorgt voor absolute gelijkheid van kansen en levert bovendien geweldige prestaties. Wie zich dus perfect wil voorbereiden op een ETS-race (waar de motor uit de ETS-motorpool beschikbaar is voor alle coureurs), doet er goed aan zich uit te rusten met een ORCA 21.5T Blitreme2 motor. Uiteraard wordt de motor ook aanbevolen voor alle andere open 21.5T stock races!
[youtube;3Q-n4yW15GE;960:540]
Technische specificatie
| Type: | Brushless |
| Race Klasse: | Stock |
| Wikkelingen: | 21.5 T |
| ETS Goedgekeurd: | Ja |
MR33 Tire Roller 1:10 Rush Touring Car Tires
€ 17,95
De MR33 bandenroller wordt gebruikt om je racebanden voor te bereiden.
Zoals je waarschijnlijk wel weet, "rollen" veel rijders de nieuwe banden met een beetje druk over het afstelbord voordat ze ze voor het eerst gebruiken.
Dit proces dient om de superlijm te "breken" op plaatsen waar mogelijk te veel bandenlijm is gebruikt.
Je kunt de bandeninzet ook vlakker maken door te rollen, waardoor de lucht (de afstand) tussen de inzet en het bandenrubber toeneemt.
Als je alleen een inbussleutel of ander gereedschap gebruikt om te rollen, kun je geen gelijkmatige druk uitoefenen.
Je drukt ook precies op de rand van het gat waar later de wielas doorheen wordt gestoken, en dit kan het vervormen - allesbehalve perfect!
De 3D-geprinte MR33 bandenroller is de perfecte oplossing.
Hij past perfect in de velg en zorgt voor een gelijkmatig contact en druk tijdens het rollen.
Het gat in de velg wordt ook niet belast en behoudt zijn oorspronkelijke vorm.
Inhoud: 1 x MR33 bandenroller voor Rush velgen (1:10 elektrische toerwagen)
MR33 Tire Roller 1:10 Ride Touring Car Tires
€ 17,95
De MR33 bandenroller wordt gebruikt om je racebanden voor te bereiden.
Zoals je waarschijnlijk wel weet, "rollen" veel rijders de nieuwe banden met een beetje druk over het afstelbord voordat ze ze voor het eerst gebruiken.
Dit proces dient om de superlijm te "breken" op plaatsen waar mogelijk te veel bandenlijm is gebruikt.
Je kunt de bandeninzet ook vlakker maken door te rollen, waardoor de lucht (de afstand) tussen de inzet en het bandenrubber toeneemt.
Als je alleen een inbussleutel of ander gereedschap gebruikt om te rollen, kun je geen gelijkmatige druk uitoefenen.
Je drukt ook precies op de rand van het gat waar later de wielas doorheen wordt gestoken, en dit kan het vervormen - allesbehalve perfect!
De 3D-geprinte MR33 bandenroller is de perfecte oplossing.
Hij past perfect in de velg en zorgt voor een gelijkmatig contact en druk tijdens het rollen.
Het gat in de velg wordt ook niet belast en behoudt zijn oorspronkelijke vorm.
Inhoud: 1 x MR33 bandenroller voor Ride velgen (1:10 elektrische toerwagen)
MR33 Hardware Box Small Double-Sided 12 x 9 x 3,5cm - Black
€ 6,95
MR33 Hardware Box Small Double-Sided 12 x 9 x 3,5cm - Black
Deze kleine doos heeft talrijke, afzonderlijk afsluitbare compartimenten die geschikt zijn voor het opbergen van schroeven, vulplaten, plastic onderdelen, kogellagers en vele andere kleine reserveonderdelen.
Afmetingen: 12 x 9 x 3,5cm (dubbelzijdig)
MR33 Aluminum Shim 3,0 x 6,0 x 0,75mm - Black (10)
€ 6,95
MR33 Aluminum Shim 3,0 x 6,0 x 0,75mm - Black (10)
Deze MR33 aluminium vulplaatjes set bevat 10 vulplaatjes met een dikte van 0.75mm. De vulplaten zijn zwart geanodiseerd en zijn perfect voor het tunen van RC wagens.
Afmetingen van de vulplaten: 3,0 x 6,0 x 0,75mm
SkyRC NC1600 Charger for 4xAA/AAA
€ 37,50
Product information "SkyRC NC1600 Charger for 4xAA/AAA"
The NC1600 charger is more than just fast. Thanks to its modern and highly precise chip, it's also considerably smarter when it comes to charging NiMH batteries of sizes AA and AAA. With 4 independent charging slots, an 8-second auto-start, and 3 operating modes, it transforms what would otherwise be a tedious task into a pleasant and relaxed experience without much thought. The LCD screen also provides a compact overview of the charging status. Once the battery is fully charged, the charger automatically switches to "trickle charge." This is to replenish the capacity lost due to the self-discharge of the battery and ensures that the battery is truly fully charged. With a relatively low pulse charging rate of 30-70mA, the lifespan of the batteries can be easily extended!
The NC1600 is powered universally and conveniently via the USB-C port, using existing smartphone chargers with at least 5V/2.1A, for example. So, say goodbye to another unnecessary adapter and the empty disposable batteries in the drawer. The environment will also appreciate it.
Features:
- 4 independent charging slots and a clear LCD display
- 3 operating modes: Charge, Discharge, and Refresh
- Includes internal resistance measurement
- Robust technology in pocket size
- A must-have in every household
- Comes with advanced safety features
Technical Specifications:
| Input (USB): | - 15W QC3.0, PD 5V/3.0A - 5V/2.1A |
| Modes: | Charge / Discharge / Refresh |
| Battery Types: | NiMH / NiCd |
| Charge Current: | When powered by 15W QC3.0, PD 5V/3.0A adaptor: - 1600mA/slot for 3 batteries - 1500mA/slot for 4 batteries When powered by 5V/2.1A adaptor: - 1600mA/slot for 2 batteries - 1000mA/slot for 4 batteries |
| Discharge Current: | 100 - 700mA |
| Trickle Charge Rate: | 30 - 70mA |
| Working Temperature: | 0°C - 40°C |
| Max. Charging Capacity: | 3000mAh |
| Weight: | 114g |
| Dimensions: | 108x79x32.9mm |
Delivery:
1x NC1600 Charger
1x Manual
Tool Set with Bag (11 pcs) HSS Titan plated
€ 54,95
This set includes:
- Phillips screwdriver 5.0mm, 3.0mm
- Slotted screwdriver 4.0mm, 3.0mm
- Hexagon screwdriver 1.5mm / 2.0mm / 2.5mm / 3.0mm
- Allen screwdriver 4.0mm / 5.5mm / 7.0mm
- Handy case
Technical Specifications
| Dimensions: | 195x132x43mm |
| Weight: | 490g |
Hobbywing Xerun Justock Combo G3S with 17.5 Turn 2450kV for 1:10 Stock
€ 134,95
Product information "Hobbywing Xerun Justock Combo G3S and 17 Turn 2450kV for 1:10 Stock"
A combination of the JUSTOCK 3650SD G2.1 motor and the XR10 JUSTOCK G3S ESC, this combo is perfectly matched for the ambitious stock or races. The XR10 JUSTOCK G3S ESC was specially developed for races and training drives. The expanded "RPM Limit" programming option ensures that the limit can be adjusted depending on the racing requirements - up to 88000RPM as well as unlimited. In addition, there is the well-known fixed 0-Timing, which is often required in races. So get ready for a fair and successful race. Thanks to new programming options compared to its predecessor, it is now also possible to determine the direction of rotation of the motor as well as to set the BEC voltage to a certain value.
Features (ESC)
- Even more available parameters than the normal Justock G3 controller (smart fan, freewheeling, initial throttle force)
- Refined parameter options
- RPM limit of 10000RPM up to 88000RPM in 1000 steps (instead of only 25000 or 33500)
- Perfect for competition thanks to RPM limits and 0 timing
- Direction of motor rotation free choosable (CW or CCW)
- Adjustable BEC voltage (6V or 7,4V)
- Robust aluminum housing for ideal heat dissipation
- Built-in capacitors as a space-saving solution compared to external capacitors
- Various protective functions against polarity reversal, overheating, Fail-safe and more
- Firmware upgrades possible to always be up to date
Features (Motor)
- Heat-resistant magnet and double insulated windings
- Precision bearings
- Cool look and good heat-dissipation
- Linear and smooth control
- Re-buildable design
Technical Specifications (ESC)
| ESC | |
| Type: | Brushless, Sensored |
| Power (cont./peak): | 60A / 380A |
| Input Voltage: | 2S LiPo |
| BEC: | 6V / 7.4V bei 4A |
| Motor Types: | Brushless Motors (sensored / sensorless) |
| Motor Limit: | >=10.5T 3650 Motor |
| Fan: | Yes, Input via BEC |
| Programming: | LCD Programming Box G2, LCD Programming Box Pro, OTA Module, separate Programming Port |
| Dimensions: | 40.9x33.9x32.1mm |
| Weight: | 75.4g |
| Application: | 1/10, 1/12 On-Road and Off-Road Competition and Training (e.g. Touringcar, Buggy) |
| Motor | |
| Type: | Brushless / Sensored |
| Poles: | 2 |
| kV Rating: | 2450KV |
| Windings: | 17.5T |
| LiPo Cells: | 2-3s |
| No-Load Current: | 3.5A |
| Outer Diameter: | 35.9mm |
| Length: | 52.5mm |
| Shaft Diameter: | 3.17mm |
| Weight: | 176g |
| Timing: | Fixed |
| Application: | 1/10, 1/12 On-Road and Off-Road Stock (e.g. Touringcar, Buggy) |
Delivery:
1x ESC
1x Motor
Hobbywing Xerun XR10 Justock G3S Brushless ESC 60A, 2s-3 LiPo, BEC 4A
€ 64,95
The XR10 JUSTOCK G3S ESC offers even more setting options and finer adjustment to Your own driving style than the regular Justock G3 controller. Developed specifically for races and training rides, both a 0 timing and an RPM limit of up to 88,000RPM are of course available. So get ready for a fair and successful race. Another new feature is that the motor can rotate clockwise or counterclockwise thanks to the Justock G3S ESC. With the equally adjustable BEC voltage, there are countless possibilities for combining the controller with the other electronics of an RC car. Also there are numerous safety functions such as reverse polarity protection, which ideally prevents damage caused by the battery being plugged in incorrectly by accident.
The Xerun series from Hobbywing exclusively includes sensor-based brushless systems for professional racing use. The product range extends from 1/12 scale to 1/8 as well as from Modified to Stock. The excellent performance, high reliability and several other features meet the high requirements of top-level drivers in all respects.
Features:
- Even more available parameters than the normal Justock G3 controller (smart fan, freewheeling, initial throttle force)
- Refined parameter options
- RPM limit of 10000RPM up to 88000RPM in 1000 steps (instead of only 25000 or 33500)
- Perfectly suited for competition thanks to the RPM-Limit and 0-Timing options
- Motor direction of rotation free choosable (CW or CCW)
- Adjustable BEC Voltage (6V or 7,4V)
- Robust aluminum housing for ideal heat dissipation
- Built-in capacitors
- Firmware upgrades possible to always be up to date
- Various protective functions:
- Polarity reversal
- Overheating
- Undervoltage shutdown
- Fail-safe
- Motor lock-up
Technical Specifications:
| Type: | Brushless, Sensored |
| Power cont./peak | 60A / 380A |
| Input Voltage: | 2S Lipo |
| BEC: | 6V / 7.4V @ 4A |
| Motor Types: | Brushless Motors (sensored / sensorless) |
| Motor Limit: | >=10.5T 3650 Motor |
| Fan: | Yes, Input via BEC |
| Programming: | LCD Programming Box G2, LCD Programming Box Pro, OTA Module, separate Programming Port |
| Dimensions: | 40.9x33.9x32.1mm |
| Weight: | 75.4g |
| Application: | 1/10, 1/12 On-Road and Off-Road Competition and Training (e.g. Touringcar, Buggy) |
Optional Accessories:
HW30502001 LCD Programming Box G2
HW30502002 LCD Programming Box Pro
HW30850400 OTA Programmer
Â