The small KAVAN C100 Duo 2x500W dual channel charger has been designed to offer an intelligent, high performance charger with mains and car battery power and very simple and clear operation. The C100 Duo can charge and discharge common cell types (NiCd, NiMH, LiPo, LiHV, ULiHV, Li-ion, LiFe, Pb), plus it features built-in six-channel balancers to ensure safe charging of lithium batteries. The charger is equipped with a colour LCD display and programming buttons that provide you with the possibility of comfortable and very clear parameter setting, control and monitoring of the charging/discharging process. Of course, English and German menus are available.

In addition to the compact "palm-sized" design and intuitive operation, it is worth a special mention: 

• charging program for new types of "high voltage" lithium batteries LiHV with a terminal voltage for charging up to 4.35 V and ULiHV with a terminal voltage of 4.45 V
• powerful balancer with current up to 1.5 A
• synchronous operation of both channels for charging two identical batteries or parallel charging of one battery up to 800 W
• adjustable end-voltage for charging and discharging of lithium batteries (allows more gentle charging, which aviators like, or, on the contrary, brutal overcharging, which "car guys" like)
• adjustable end-voltage for charging of lead-acid batteries (1.90-2.45 V; allows charging of all types of lead-acid batteries)

Overview of basic functions and parameters:

• Mains power supply 100-240 V/50-60 Hz
• Power supply 10-30 V DC (XT60 socket)
• For charging and discharging 1 - 16 NiCd/NiMH cells, 1 - 6 Li-ion/Li-poly/Li-Fe/LiHV/ULiHV cells or 2- 24 V lead-acid batteries
• Adjustable charging current (0.2 A - 20.0 A) at each channel (max. 100 W with mains power, max. 500 W with car battery or powerful stabilized power supply)
• Adjustable discharge current 0.2 A - 1.5 A at each channel
• Max. power for charging 1x 800W in parallel charging mode
• Max. discharge power 2x 15 W, max. 1x 30 W in parallel discharge mode 
• Charge termination with delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current/constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries 
• Adjustable end-voltage for charging and discharging of lithium and lead-acid batteries 
• Three modes for lithium batteries - charge, discharge and storage charge/discharge; all with or without a balancer. Plus a disposal discharge mode to safely discharge a discarded battery before it is sent for recycling
• Channel CH1 can operate as a stabilized power supply with adjustable voltage 2-30 and current 1.0-5.0 A
• Easy firmware update via USB-C port
• Backlit colour LCD display with simple and clear menu and parameter display during charging/discharging
• Programming buttons for easy and clear setting and control of the charger
• A number of warning messages contribute to safe operation - incorrect input voltage, incorrect wiring, unsuitable battery or its condition, incorrect polarity at the output, etc.
• Forced cooling fan
• Small dimensions

Specifications:

The charger is equipped with XT60 output sockets in both channels and universal sockets for JST-XH balancer connectors, allowing direct connection of battery power cables and JST-XH balancer connectors of sets 2-6S - if you use sets with XT60 and JST-XH connectors, you can do without charging cables and adapters. You can use standard Sky RC or RC System adapters to connect balancer connectors from other systems.

XT90 Charging cable for Dean-T batteries, length 25cm, 14AWG.

Charging cabel XT60 - Tamiya Gold - Lenght 200mm, 14AWG.

Konect 3S Battery 40cm Balance Charge Cable T-Plug

Konect 4S Battery 40cm Balance Charge Cable T-Plug

LAADKABEL 2S 60CM LANG 4MM GOLDPLUG NAAR 4/5MM GOLDPLUG

LAADKABEL 2S 60CM XT60 NAAR 4/5MM GOLDPLUG

LAADKABEL 4MM GOLD PLUG.
24CM LANG.

LAADKABEL BEC

Laadkabel XT-60 2,5qmm²

Arikelnummer: 810037

LRP 2S-CHARGING LEAD - 60CM - XT60, XH TO 4/5MM, 2MM

LRP Double-charging lead - 4mm/5mm 2S LiPo Hardcase incl. XH

LRP LiPo Safe Charging Bag, 23 x 30 cm replaces 65845

LRP universal charging lead - Futaba rx / tx plug

LRP universal charging lead - Sanwa / Graupner / JR - rx / t

This starter set is the ideal carefree package for getting started in the RC hobby. NiMH batteries are very robust and resistant and are ideal for BRUSHED RC cars. Thanks to the user-friendly operation (plug and play), this set is also perfect for beginners.
 
Charger specification:
 
Charging current: 800mAh
Operating voltage: 100-240V
Battery type: NiMH 1-9 cells / 1.2V-10.8V
Power supply type: integrated power supply
Charging control: Status LEDs (red/green)
Delta peak switch-off
Dimensions (L/W/H): 100x61x30mm 
Weight: 100g
 
Battery specification:
 
Suitable for 1:10 RC cars (almost all types)
Battery type: NiMH
Capacity: 3000mAh
Voltage: 6 cells / 7.2V
Power cable/plug: 12AWG silicone cable/Tamiya plug
Dimmensions (L/W/H): 135x46x25mm
Weight: +/- 325g
 
Scope of delivery:
 
1* NC-1 charger
1* NiMH Racing Pack 3000mAh
1* Adapter T-plug/Tamiya

The Raytronic C30 + 300W was designed to offer an intelligent pocket charger with high performance and very simple operation. RAYTRONIC C30 + allows charging and discharging common types of cells (NiCd, NiMH, LiPo, LiHV Li-ion, LiFe, Pb), in addition it is equipped with a built-in six-channel balancer, which ensures safe and comfortable charging of lithium batteries. Measurement of voltage and internal resistance of individual cells (for lithium batteries) is a matter of course.

Features:

• Input supply voltage 10 - 26 V DC (socket XT60)
• For charging and discharging 1 - 16 NiCd / NiMH cells, 1 - 6 Li-ion / LiPo / LiHV / LiFe cells or 2- 20 V lead-acid batteries
• Adjustable charging current (0.1 A - 12.0 A)
• Adjustable discharge current (0.1 A - 3.0 A)
• Max. power for charging 300 W, for discharging 5 W
• Termination of charging using delta-peak automation for NiCd and NiMH batteries
• Lithium and Pb batteries are charged using the "constant current / constant voltage" method
• Adjustable delta-peak detection sensitivity for NiCd and NiMH batteries
• Adjustable end voltage for charging and discharging for lithium batteries
• Repeated cyclic operation of charging / discharging or discharging / charging for NiCd and NiMH batteries, up to 5 cycles
• Four charging modes for lithium batteries - normal charging, fast charging, balancing charging and storage charging / discharging
• Stop charging when the set time or the supplied charge is exceeded.
• Memory for 5 charging / discharging programs.
• Measurement of the total voltage of the set and individual cells (for lithium batteries)
• Measurement of the total internal resistance of the set and individual cells (for lithium batteries)
• The XT60 power output socket and the JST-XH 2-6S universal balancer socket allow you to connect the rechargeable battery directly without the need for a charging cable and balancer adapter (if the kit is equipped with an XT60 power connector and a JST-XH service connector)
• Two-line backlit LCD display with simple and clear menu and display of parameters during charging / discharging
• A number of warning text messages contribute to safe operation - incorrect input voltage, incorrect connection, unsuitable battery or its condition, incorrect polarity at the output
• Reverse polarity and short circuit protection at the output / li>
• Compact plastic case, small dimensions
• Built-in fan for forced cooling

Specifications: