XRAY XB4 2021 Optionen

Xray Anti-roll Bar 1.4 Mm, X362474

Xray Anti-roll Bar 1.6 Mm, X362476

Xray Anti-roll Bar 2.0 Mm, X362480

XRAY BALL END 4.9MM WITH THREAD 5MM (2) - 362649

High-quality ball-bearings ID x OD x thickness (mm) = 8x14x4mm. Set of 2 pieces. These ball-bearings are degreased and lightly oiled with AeroShell Fluid 12 oil for maximum smoothness, long life, highest tolerance and maximum performance.

Xray Ball-bearing Mr85zz 5x8x2.5 (2), X930508

Xray Body For 1/10 4wd Off-road Buggy - Gamma 4c - Light

Xray Body For 1/10 4wd Off-road Buggy - Gamma 4d - Light

Xray Brass Rear Chassis Brace Weight 40g

XRAY COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 75T / 48 - 365875

XRAY COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 78T / 48 - 365878

XRAY COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 84T / 48 - 365884

XRAY COMPOSITE 3-PAD SLIPPER CLUTCH SPUR GEAR 87T / 48 - 365887

Xray Composite Angled Hub For Bevel Drive Gear - Front Hs Bulkhead - 2 Dots

Xray Composite C-hub 6 Deg. Left, X362221

Xray Composite C-hub 6 Deg. Right, X362211

Xray Composite C-hub 9 Deg. Left - Graphite, X362220-g

Xray Composite C-hub 9 Deg. Left, X362220

Xray Composite C-hub 9 Deg. Right - Graphite, X362210-g

Xray Composite C-hub 9 Deg. Right, X362210

Xray Composite Center Diff Spur Gear 78t / 48, X364978

Xray Composite Center Diff Spur Gear 84t / 48, X364984

Xray Composite Chassis Brace Front - Medium, X361294

Xray Composite Chassis Brace Rear - Medium, X361295

Xray Composite Chassis Side Guards L+r - Medium, X361269-m

Large volume rubber-sealed CENTER differential case made from specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place.

Large volume rubber-sealed CENTER differential cover made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Large volume rubber-sealed CENTER differential case made from specially-formulated graphite composite material. Lighter, tougher material with higher temperature and wear resistance, also holds the screws better secured in place.

Large volume rubber-sealed CENTER differential cover made from specially-formulated graphite composite mixture for increased strength and lower weight. Perfect balance between reliability and performance.

Xray Composite Steering Block - Graphite, X362250-g

Xray Composite Suspension Arm Front Lower, X362112

XB4 Composite Suspension Arms Rear Lower - Graphite

• Special graphite composite mixture

• Increases stability

• Increases cornering speed

• Lightweight

• For High traction tracks

• Durable

Rear lower suspension arms made from specially-formulated graphite composite mixture, perfect for high-traction conditions. The graphite arms make the car more stable and give increased cornering speed. Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the rear shock tower can be placed either in front of or behind the bulkhead.

XB4 Composite Suspension Arms Rear Lower - Graphite

• Special graphite composite mixture

• Increases stability

• Increases cornering speed

• Lightweight

• For High traction tracks

• Durable

Rear lower suspension arms made from specially-formulated graphite composite mixture, perfect for high-traction conditions. The graphite arms make the car more stable and give increased cornering speed. Intelligent arm design allows for variable positioning of the rear shocks. Depending on track conditions, the rear shocks can be installed either in front of or behind the rear shock tower, and the rear shock tower can be placed either in front of or behind the bulkhead.

XRAY COMPOSITE UPRIGHT REAR - GRAPHITE - 323354-G

XRAY Diff Bevel & Satellite Gears (2+4) - 335030

XRAY Drive Shaft Coupling Hudy Spring Steel - 305231

CNC-machined 83mm ECS drive shaft with 2.5mm pin made from world-renowned HUDY Spring Steel????. This race-quality drive shaft is a spare part for #365202 ECS Front Drive Shaft 83mm with 2.5mm Pin - Spring Steel????. Drive shaft diff end has been strategically lightened to reduce rotating mass without compromising strength.

Xray Ecs Drive Shaft 83mm With 2.5mm Pin - Hudy Spring Steel™

XRAY ECS Drive Shaft in length 83mm with 2.5mm pin. The XRAY’s unique ECS Drive Shaft equalizes the speed between the drive shaft and the wheel.

With a unique 2-piece joint between the axle and the wheel, the same extreme wheel turning angle is divided into two shallower angles without joint binding. This means that at the same cornering speed, the inner wheel will not bind or vibrate. Drive through the corner is more stable, more precise, and easier to drive. The ECS Drive Shafts help also with improved landing after jumps.

With the ECS drive shafts, wheel vibrations and noise are decreased to minimum, steering is increased, stability of the car is increased and cornering speed and smoothness are noticeably increased as well. A must have option part.

Xray Ecs Front Drive Shaft 83mm With 2.5mm Pin - Hudy Spring Steel™ - Set

XRAY Front Hardened Shock Shaft (2) - 368160

XRAY FRONT SPRING-SET - 1 DOT (2) - 368183

XRAY FRONT SPRING-SET - 1 STRIPE & 3 DOTS (2) - 368182

XRAY FRONT SPRING-SET - 3 DOTS (2) - 368185

XRAY Front Spring-Set - 4 Dots (2) - 368186

FRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compression. Marked with 1 DOT for easy identification. These springs extend the existing springs line up for further set-up adjustments.

The springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

FRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compression. Marked with 2 DOTS for easy identification.

The springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics. 

XRAY FRONT SPRING-SET L=42MM - 3 DOTS (2) - 368193

FRONT linear springs have been specifically designed to complement the big-bore shocks. Spring rate is constant during the entire spring compression. Marked with 5 DOTS for easy identification. These springs extend the existing springs line up for further set-up adjustments.

The springs, like all the other XRAY springs, are manually measured, selected and matched into pairs to guarantee precisely equal length and damping characteristics.

XRAY FRONT SPRING-SET PROGRESSIVE -- 3 DOTS (2) - 368175

Xray Graphite Chassis T-brace - Front - Set

Xray Graphite Fan Holder 2.2mm

XRAY LEXAN REAR WING - 323510