CORE-RC KRIPKOUS 5MM ZWART 20X

SHIMS 5 X 10 X 0.3 - PK10

SHIMS 5 X 8 X 0.3 - PK10

PINION GEAR 48DP 22T (7075 HARD)

SHIMS 4 X 10 X 0.3 - PK10

SHIMS 5 X 10 X 0.5 - PK10

SHIMS 5 X 15 X 0.5 - PK10

SHIMS 6 X 10 X 0.2 - PK10

SHIMS 6 X 18 X 0.2 - PK10

SHIMS 6 X 8 X 0.5 - PK10

Widely regarded as the best type of tape in the industry. Easily adheres electrics to chassis, this clear tape is now available from CORE RC.

Relatively large roll at 3 metres in length but still suitable to fit in your tool bag with ease.

Sticks extremely well and peels off in one piece with no residue.

3m roll.
25mm width.
55mm diameter when new.
Approx 1mm thick.

Dash Silicon Wire 13AWG White 1m

HIGH END SLIDE-LUBRICANT FOR LINKS, SHAFTS AND BEARINGS

BALSAM FOR RC CARS

DryFluid Extreme was specially developed for radio controlled model cars with the aim to preserve as long as possible or rather to extend significantly the efficiency and lifetime of these mechanical marvels.

The effect of this new lubricant for links, shafts and bearings begins where others show their limits. Lowest sliding friction, maximum speed and minimal dust and dirt binding were the main objectives of the development. Findings in the aviation and vehicle industries and the expert knowledge of RC car pilots are the driving forces behind this new lubricant.

SLIDE-LUBRICANT INSTEAD OF OIL

DryFLuid is a dry slide-lubricant rather than a classic oil or grease. DryFluid is not wax, it is neither greasy nor oily but is silicone-free. A long-lasting lubrication effect is achieved using dry particles, sliding polymers and high end sliding fluids. The application and long-term effects of DryFluid Extreme will inspire every RC pilot.

PRODUCT-FEATURES

Reduction of power loss on links, shafts and bearings and it guarantees a long life of the treated components.

Lowest sliding friction for free movement and wear reduction

Multistage lubricant system with immediate and long-term effects

Dust and dirt repellent

Extremely good creeping abilities

Excellent material compatibility with all current metal, plastic and natural rubber materials Outstanding adhesive and anti-corrosive properties

This is classed as a hazardous material by our shippers and consequently cannot be sent outside the UK by air transport.

Within the UK it can only be sent by UPS not post.  Please only select UPS for the shipping method at the checkout.

Epoxy 5min. 100gram

Een zeer hoogwaardige 5 minuten epoxy! Snel uithardende, oplosmiddelvrije en vulstofvrije 2-componenten epoxyharslijm met honingachtige viscositeit. Zeer goed geschikt voor CFK, GFK, hout, metaal, steen, harde schuimen en vele kunststoffen.

• 2 x 50ml
• 1 x Harder
• 1 x Hars
• +/- 5 Minuten tijd om de epoxy te verwerken
• Epoxy blijft naar uitharden glasklaar
• Geschikt voor o.a. hout, epoxyrompen etc.

Artikel nummer: 806100

EAN: 4042774151782

Features:

• Made from carbon steel, #11 Blades
• Available in packs of 5, 15, 100, 500, 1000
• The double honed replacement blade has a strong tip and flex so you do not have to worry about breaking their edge and tip. 
• This versatile replacement blade fits with all standard light and medium duty Xacto style knives.
• Used with: cuts on paper, card-stock, stencils, film, photographs, tape, plastic, cork, wood, vinyl, cloth, leather, cardboard, foam boards and most other light-weight crafting. 
• Used for: model making, paper cutting, cake decorating, Cricut vinyl cutting and polymer clay.
• Used by graphic artists, architects, car wrappers, designers, hobbyists, scrapbook artists and crafters.
• Fits with: K1, K3, K17, K18, K26, K30, & K71 handles
• L – 1.575/ H – 0.350 / E - 0.975/ S – 0.250/ T – 0.020

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT GREEN (6)

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT RED (6)

EXTRA LONG BODY CLIP 1/10 - FLUORESCENT YELLOW (6)