• A nice and clean tool bag to cover and carry your tools
• Extra hardened "Spring Steel" tool tips
• Synthetic handle for a ergonomic grip
• Colored caps for an easy iddentification

• Hex Driver 1.5mm
• Hex Driver 2.0mm
• Hex Driver 2.5mm
• Hex Driver 3.0mm
• Phillips Screwdriver 3.0mm
• Phillips Screwdriver 5.0mm
• Flat Screwdriver 4.0mm
• Nut Driver 4.0mm
• Nut Driver 5.5mm
• Nut Driver 7.0mm

• Round Head Hex Driver
• Arm Reamer
• Caster Clip Remover
• Thread Taps

LIGHTWEIGHT SPUR GEAR (48T)

Maskingtape 10mm/10m

This starter set is the ideal carefree package for getting started in the RC hobby. NiMH batteries are very robust and resistant and are ideal for BRUSHED RC cars. Thanks to the user-friendly operation (plug and play), this set is also perfect for beginners.
 
Charger specification:
 
Charging current: 800mAh
Operating voltage: 100-240V
Battery type: NiMH 1-9 cells / 1.2V-10.8V
Power supply type: integrated power supply
Charging control: Status LEDs (red/green)
Delta peak switch-off
Dimensions (L/W/H): 100x61x30mm 
Weight: 100g
 
Battery specification:
 
Suitable for 1:10 RC cars (almost all types)
Battery type: NiMH
Capacity: 3000mAh
Voltage: 6 cells / 7.2V
Power cable/plug: 12AWG silicone cable/Tamiya plug
Dimmensions (L/W/H): 135x46x25mm
Weight: +/- 325g
 
Scope of delivery:
 
1* NC-1 charger
1* NiMH Racing Pack 3000mAh
1* Adapter T-plug/Tamiya

 Specification:

• 2.4Ghz A.F.H.D.S. system
• 3-channel
• Failsafe function
• Measurement: 35 x 21 x 12mm
• Weight: 10g
• Voltage: 4,8V - 6,6V

Re-chargeable Batteries - 3.7V 1500mAh (2)

Rear Hub Set

Ride Height Gauge 15-20mm 1:10 Offoad

• Height gauge for RC models
• Measurement range 15mm - 20mm
• 1mm incremental positioning
• Material: Aluminum

Ride Height Gauge 20-30mm 1:10 Offoad

• Height gauge for RC models
• Measurement range 20mm - 30mm
• 1mm incremental positioning
• Material: Aluminum

Screw Rods M3*4.1 (10)

Servo Saver Crank Set

SERVO SAVER DUST COVER (4pcs

Spring Cups f. 1:10 Standard Dampers (4)

Spring Cups f. 1:8 Dampers (4)

Steel Pinion Module 1.0 - 16T

STEERING BLOCK BUSHING (4PCS)

Steering Knuckles L/R

Suspension Arm low front (2)

TEAM-C-BOSTELS-SET-2PS

FEATURES
    
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
 
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
 
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
 
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
 
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
 
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
 
      
 
SPECIFIKATION 
 
Radio CR4S:
Channels: 4
2.4GHz Protocol: ANT
Distance: >150m
Battery (not included): 4*AAA 1.5 - 6V DC
Low V Warning: <4.2V (only NiMH)
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperatur range: -10°C - +60°C
Size: 118*73*145 mm
Weight: ca. 130 g
 
Receiver R4WP Micro (2020016):
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperatur range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
 
 
SET INCLUDES
 
1* 4-Channel radio "CR4S"
1* 4-Channel receiver
1* Antenna tube
1* Manual (DE/ENG/FR)