XRAY T4 2018 Optionen

HUDY PURE TUNGSTEN WEIGHT 5g - 293081

HUDY PURE TUNGSTEN WEIGHT 10g - 293082

Hudy Alu Countersunk Shim - Orange (10), H296510-o

Hudy Alu Nut M3 - Blue (10), H296530-b

Hudy Alu Nut M4 - Blue (10)

Hudy Alu Nut M4 - Black (10)

Hudy Alu Nut M4 - Orange (10)

XRAY T4'18 ALU CHASSIS 2.0MM - SWISS 7075 T6 - 301146

XRAY T4'18 ALU FLEX CHASSIS 2.0MM - SWISS 7075 T6 - 301147

XRAY T4'19 GRAPHITE CHASSIS 2.2MM - 301148

T4’19 Alu Chassis

301149 T4'19 Alu Chassis 2.0mm - Swiss 7075 T6

• More predictable handling

• Fits front chassis brace

• For very-high traction tracks

• 2mm thickness

• Swiss 7075 T6 aluminum

• Black anodized

Redesigned aluminum chassis to accommodate the new front chassis brace. The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.

Extensively tested and recommended for high- and very-high traction tracks, this narrow chassis is CNC-machined from 2mm premium Swiss 7075 T6 and additionally black coated.

#301150 T4'19 Alu Flex Chassis 2.0mm - Swiss 7075 T6

• Special cutout openings

• Increased flex

• Easier to drive

• For medium-to-high traction tracks

• Fits front chassis brace

• 2mm thickness

• Swiss 7075 T6 aluminum

• Black anodized

Aluminum T4’19 chassis with special cutout openings for increased flex.

Redesigned to accommodate the T4’19 front chassis brace. The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.

This chassis is recommended for and works extremely well on medium-to-high traction tracks. (Not recommended for very-high traction conditions where the #301149 - Alu Chassis works better.)

This alu flex chassis generates more traction and makes the car faster and easier to drive. Successfully raced by the factory team, this is a “must have” for every serious racer.

301151 T4'19 Alu Extra Flex Chassis 2.0mm - Worlds Edition

• World Champion chassis

• Special cutout openings

• Increased flex

• Easier to drive

• For low-to-medium traction tracks

• Fits front chassis brace

• 2mm thickness

• Swiss 7075 T6 aluminum

• Black anodized

Aluminum T4’19 chassis with special cutout openings for increased flex. This chassis is recommended for low-to-medium traction tracks as it generates more traction. (Not recommended for high- and very-high traction conditions where either the #301149 or #301150 chassis work better).

The front brace – which can be easily installed on the chassis with two screws – eliminates side flex at the front of the chassis, improving steering response and making the car more predictable.

Successfully raced by the factory team, and used by Bruno Coelho to win the World Champion title, this is a “must have” for every serious racer.

Xray Alu Countersunk Shim (4), X301159

XRAY Alu Countersunk Shim - Orange (4) - 301159-O

T4'19 Graphite Upper Deck 2.0mm - Worlds Edition

• World Champion top deck

• Narrower design

• Allows increased chassis flex

• Increases traction

• Increases in-corner steering

• For low-to-medium traction tracks

• 2mm thickness

High-quality CNC-machined top deck made from 2.0mm premium graphite material. The special narrower design allows more chassis flex, which helps to generate more traction and increase in-corner steering. Recommended for use with either standard graphite chassis or optional alu chassis on low-to-medium traction tracks.

XRAY T4'18 UPPER DECK 1.6MM GRAPHITE - 301169

XRAY T2 Impact Absorbing Front Bumper - 301203

XRAY COMPOSITE BUMPER FOR ADJUSTABLE BODY MOUNTS - 301204

CNC-machined front upper bumper holder made from premium-grade graphite material. Direct replacement for the standard composite bumper upper holder. Accommodates the BPA system – Body Position Adjustment – which uses eccentric body mounts in three different positions to adjust the position of the body.

XRAY T2 Upper Holder For Bumper 2.5 mm Graphite CNC Machined - 301213

XRAY COMPOSITE UPPER HOLDER FOR BUMPER FOR ADJUSTABLE BODY MOUNTS  - 301219

XRAY T4 FOAM BUMPER - v2 - 301224

XRAY T4 Foam Bumper - Hard - 301226

T4 FOAM BUMPER WIDE - HARD - 301228

XRAY FOAM BUMPER FOR ADJUSTABLE BODY MOUNTS - LIGHT - 301231

XRAY Front Body Mount Set +1mm Height - 301323

XRAY Front Body Mount Set +2mm Height - 301324

XRAY COMPOSITE FRONT ECCENTRIC 6MM BODY MOUNT SET - 301326

Front eccentric body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Front eccentric body mount set with 6mm-thick +2mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. Part of the BPA system – Body Position Adjustment – the eccentric design allows the body posts to be mounted in three different positions to adjust body position. For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature. The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height. There are two optional body height adjustable mounts available: either +1mm or +2mm.

XRAY Rear Body Mount Set +1mm Height - 301333

XRAY Rear Body Mount Set +2mm Height - 301334

Rear body mount set includes 6mm thick body posts made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body. 

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

Rear body mount set with 6mm-thick +1mm height-adjustable body posts. Made from special composite material that provides maximum strength but sufficient flex to reduce body post breakage in hard crashes or car rollovers. The body supports are rounded to have a better fit and provide better support to the car body.

Designed for use with graphite inserts that allow adjustment of the rear posts to three different positions, this body mount set is part of the BPA system – Body Position Adjustment.

For serious racers who focus on the small details, body height plays a very important role in the performance of the car and as such, ultra-fine body height tuning was developed by XRAY R&D engineers to address this increasingly important tuning set-up feature.

The body holders have elevated mounting to make body height adjustment very quick and easy. In a few short seconds and two clicks, you can exchange all the body holders to adjust body height.

There are two optional body height adjustable mounts available: either +1mm or +2mm.

XRAY Alu Adjustable Body Post Stop (2) - 301351-O

XRAY ALU ADJUSTABLE BODY POST STOP NUT (2) - 301352-O

XRAY GRAPHITE SHIM FOR REAR BODY POST ADJUSTMENT 3.0MM (4) - 301390

Xray T4 Alu Adjustment Ball-bearing Hub - Black

XRAY T4 SHOCK TOWER FRONT 3.0MM GRAPHITE - 302085

XRAY ALU FRONT & REAR SUSPENSION ARM 1-HOLE -- SWISS 7075 T6 (2+2) - 302101

XRAY T2'008 Front Suspension Arm Hard Rubber-Spec 1-Hole - 302163

XRAY Front Suspension Arm - Hard - Rubber-Spec - 2-Hole - 302165

XRAY Front Suspension Arm - Extra-Hard - Foam-Spec - 2-Hole - 302166

XRAY FRONT SUSPENSION ARM - HARD - 1-HOLE - 302168

XRAY ALU FRONT SUSPENSION ARM - 1-HOLE - SWISS 7075 T6 - 302170

XRAY GRAPHITE FRONT LOWER ARM PLATE 1.6MM (2) - 302190

XRAY ALU BRACE POST FOR ARS 3x5x9MM (2) - 302201-O