1:10 ABSIMA EP Desert Buggy "ADB 1.4" 4WD green RTR

• 4WD all-wheel drive
• 2.4GHz remote control
• Extremely durable composite plastic parts
• Fully adjustable suspension
• Ball bearing drive
• Adjustable 16mm Big Bore shocks
• Steel differential outputs
• 5mm aluminum motor mount
• 5mm aluminum shock towers
• Aluminum driveshaft
• 2 cone differentials (front/rear)
• LED light bar front and rear
• Extremely detailed body with add-on parts
• Vehicle can be powered by 2-cell LiPo batteries (up to 30C)
• Scale: 1:10
• Dimensions (L/W/H): 500x270x165 mm
• Weight: 2060g
• Wheelbase: 290mm
• Ground clearance: approx. 45mm
• Track width: 215mm front / 210mm rear
• Tires front/rear Ø: 110mm / Width: 45mm
• Damper oil: 400CPS
• Damper installation length: 80mm
• Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
• Dessert Buggy "ADB1.4" Brushed Version
• 2.4GHz Remote Control CR2SV2
• Mini tool kit
• Instruction manual

1:16 EP BL Touring Car "FUN MAKER" stars'n grey RTR absima

REMOTE CONTROL & STEERING:
 
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! 
      
 
FEATURES:

• 4WD All Wheel Drive
• 2.4GHz remote control
• Full ball bearing drive
• Aluminum chassis, upper deck and shock towers
• Aluminum "big bore" shock absorbers
• CVD axles on front axle
• Heavy duty front & rear differentials
• Aluminum propshaft
• LED lighting front & rear
• Extremely detailed body with sticker sheet

SPECIFICATION:

• Scale: 1:16
• Dimensions: (L/W/H): 310x140x80mm)
• Weight (without battery): 560gr
• Wheelbase: 175mm
• Ground clearance: approx. 6mm
• Track width: 110mm front / 115mm rear
• Wheels front/rear: Ø 50mm / Width: 18mm
• Damper filled: Yes (100CPS)
• Damper installation length: 38mm
• Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)

INCLUDED:

• 1:16 Touring Car RTR
• 2.4GHz remote control
• 1500mAh LiPo battery
• 800mAh LiPo fast charger
• Sticker sheet
• Manual

      
REQUIRED ACCESSORIES:

• 2* AA batteries for remote control

3-Channel Radio "CR3P" 2.4GHz incl. 2 Receive ABSIMA

SPECIAL COMBO: Including 2 receivers!!!
 
CPU Radios are every rc car or boat drivers dream! But whats your dream of? It's as much fuctions as possible, big display, stable transmission, nice design - but for an reasonable price! Here we go! Absima's CR3P!
 
Radio features:

• A.F.H.D.S. 2.4Ghz system
• 3-channel radio
• 2x 3-channel receiver
• 10 model memories
• Servo reverse
• Dual rate
• EPA
• EXP
• ABS

The big (39 x 72 mm), blue illuminated L.E.D. display shows all funtions and adjustments. It also keeps you updated about the radio voltage.
We putted the steering wheel in an outstanding position to keep handling as comfortable as possible. Additionaly the trim levers position allows to set, without leaving the model unattended.
 
Receiver specification:

• 3-channel
• Water-resistant
• Failsave included
• Measurement:
• 35 x 21 x 12mm
• Weight: 11g 

Alu 7075 T6 wheel hubs offset +0.75mm 1:10 (2)ABSIMA

● Absima sticker sheet
 

Camber Gauge absima

 
Camber Gauge

MONSTER TRUCK ASSASSIN van ABSIMA

De nieuwe MONSTER TRUCK ASSASSIN van ABSIMA, is een 4X4 auto in schaal 1/8 geïnspireerd op competitie chassis om Auto R / C te oefenen met zijn verwoestende look!
Het ontwerp met zijn aluminium chassis van de nieuwste generatie en zijn betrouwbare mechanica zorgen ervoor dat u vele rijsessies zult hebben. De 4×4 voortstuwing is volledig gemonteerd op kogellagers met drie differentiëlen, waarna het loopwerk met variabele geometrie is ontworpen om grote verplaatsingen te bieden die gepaard gaan met hydraulische schokdempers met een groot volume. De hoge bodemvrijheid in combinatie met grote banden stelt u in staat om de vele obstakels die u onderweg zult tegenkomen te overwinnen.
De geometrie is gebaseerd op een specifieke dubbele draagarm geassocieerd met hydraulische schokdempers die verstelbaar zijn door een eenvoudig wiel om te spelen op de bodemvrijheid van de auto. De hele ASSASSIN wordt geleverd in een RTR-versie, d.w.z. klaar om te rijden met een 2,2 GHz 4-weg CRSV2-radio met een stuurwiel voor besturing en vervolgens een trigger voor acceleratie en remmen. Aan de motorkant heb je de keuze:

Optie 1 De " 4s » : Of u kiest voor een aangedreven motor in " 4s » te bereiken 70Km/h
Optie 2 op « 6s » : Ofwel een versterkte versie aangedreven door " 6s " voor nog krachtiger, bij de grens van de redelijkheid.

Nu is het aan jou : MOORDENAAR 4S of MOORDENAAR 6s

BELANGRIJKSTE TECHNISCHE KENMERKEN EN INNOVATIES:

HET CHASSIS

Het chassis wordt gemonteerd en origineel afgesteld geleverd. Deze is volledig verstelbaar als wedstrijdchassis met instelbare rijhoogte, instelbare schokdempers, verstelbare camber, knijp- en openingshoek, meerdere schokmontageposities en ook een verstelbare achterspoiler. Aluminium onderdelen worden behandeld en geanodiseerd, zoals de chassisplaat die lasergegraveerd is met een dikte van 3 mm. Er zijn ook geanodiseerde gouden kleuren, wishbone-steunen, wielnaven, versterking en schokdemperonderdelen, dit alles garandeert een lange levensduur van het chassis en een high-end ontwerp.

DE MOTORISERING VAN DE AUTO

De motorisering met in de eerste plaats, de elektronische variator wordt aangedreven door het merk Hobbywing, dat de beste in zijn categorie is in termen van prestaties en betrouwbaarheid, om tot een snelheid van 70 km / h te komen! De koelventilator op deze 120A-aandrijving zorgt voor regeling bij een constante temperatuur tijdens de werking van de ASSASSIN 4S, zelfs bij vol gas. De 2300KV-motor levert waanzinnig vermogen aan de wielen. De volledig aluminium motorsteun is ook gemakkelijk verstelbaar en verwijderbaar.

Op de elektronische aandrijving zijn desgewenst ook veel instellingen beschikbaar, zoals: remkracht, mechanische remretour naar neutraal, punchmodus, bedrijfsmodus en afschakelspanning van uw LiPo-batterijen. U kunt de instellingen wijzigen via een aanpassingsknop of een programmeervak (afzonderlijk verkrijgbaar). T-plug connectoren zorgen voor een betrouwbare verbinding tussen uw speedo en de gekozen accu's. We raden aan om kwaliteitsbatterijen te gebruiken met een hoge capaciteit en een ontladingssnelheid van ten minste 45C. De 4WD-transmissie wordt geleverd door CVD-type CVD CVD-gimbals aan de voor- en achterkant, terwijl er in het midden gimbals zijn met gepinde ballen.
 

HET RADIOSYSTEEM

Ons radiosysteem is de ABSIMA "CR2SV2" in 2,4 GHz frequentie, bewezen en betrouwbaar in het garanderen van snelle communicatie met uw voertuig voor nauwkeurig rijden. De stuurservo is uitgerust met metalen tandwielen met een vermogen van 9 kg, allemaal gecombineerd met hoogwaardige banden om een goede besturing op alle oppervlakken te garanderen.

HOOGTEPUNTEN VAN DEZE KIT:

-De volledig geassembleerde auto klaar voor gebruik
-4WD (4WD) met 4 verstelbare hydraulische schokdempers -Mooie gelakte en versierde carrosserie -Krachtige borstelloze motorisering van 2300Kv
-Transmissie en waterdichte elektronica -Eenvoudig onderhoud met gemeenschappelijke onderdelen op Avt en Arr
loopwerk -Opties en reserveonderdelen beschikbaar



-Een ontwerp rechtstreeks van de concurrentie

DEZE KIT BEVAT

De volledig geassembleerde auto

De CR2SV2 ABSIMA afstandsbediening met 2.4GHZ stuurwiel

Elektronica gemonteerd en geparametriseerd

De zeer gedetailleerde instructies met lijst van reserveonderdelen voor service en onderhoud

STARTER KITS NIET INBEGREPEN:

4 batterijen voor afstandsbediening (AA)

Een batterijbeschermingstas (we raden referentie 9000008)

Een programmeervak (referentievak 2110041)

LIPO batterijen (Wij raden batterijen referentie 4140009 - LiPo Stick Pack 7.4V-45C 5000 Hardcase T-plug)

Eén oplader (we raden de APC-1-lader ref 4000013)

SPECIFICATIES

-Auto MONSTER TRUCK 1/8 Elektrische Borstelloos voor oefening in off-road en op de weg
-Elektromotor Borstelloos 2300KV 4 polen / 650W / Motor as van 5mm, -Elektronische variator 120A Hobbywing elektronisch programmeerbaar met (rem, neutrale positie, verschillende rijmodi,
automatische laagspanningssnede) / compatibele Lipo batterij 7.4V / gelijkstroom 50A en Peak 300A / Bec 6V-3A / connectoren type Dean T.
-9kg stuurmotor met stalen tandwielen -Aluminium motorsteun met glijbanen
-Transmissie volledig op kogellagers en beschermende
behuizingen -Carbals type CVD diameter mm behandeld staal
(voor en achter)
-Drie differentiëlen voor, centraal en achter Centrale kunststof kroon van 49 tanden in Module 1 -Body met polycarbonaat cabine, geverfd en gedecoreerd

-Dubbele steunvin in flexibele kunststof Grote beschermende
voorbumper -Grootvolume hydraulische schokdempers diameter 16mm met veervoorspaningswiel -Multi-positie
voor en achter aluminium schokdemperbeugels -Pinch en camber verstelbaar door omgekeerde
steekstangen -Batterijconnectoren type "Dean T"
-Standaard naven in 17mm
-
Multi-pimple pneumatisch zacht rubber
-Snelheid van meer dan 70 km/u!

Nylon nut M4 (8 ABSIMA

 
Nylon nut M4 (8
Fits for ATC2.4, AB2.4, AT2.4, AMT2.4

Phillips head screw M3x10 (6) ABSIMA

 
Phillips head screw M3x10 (6)
Fits for ATC2.4, AB2.4, AT2.4, AMT2.4

Self-tapping phillips head screw M3x10 (10) ABSIMA

 
Self-tapping phillips head screw M3x10 (10)
Fits for ATC2.4, AB2.4, AT2.4, AMT2.4

Servo saver post ABSIMA

 
Servo saver post
Fits for ATC2.4, AB2.4, AT2.4, AMT2.4

Steel Pinion Module 1.0 - 14T

 
Steel Pinion Module 1.0 - 14T

1:10 ABSIMA EP Desert Buggy "ADB 1.4" orange 4WD RTR

• 4WD all-wheel drive
• 2.4GHz remote control
• Extremely durable composite plastic parts
• Fully adjustable suspension
• Ball bearing drive
• Adjustable 16mm Big Bore shocks
• Steel differential outputs
• 5mm aluminum motor mount
• 5mm aluminum shock towers
• Aluminum driveshaft
• 2 cone differentials (front/rear)
• LED light bar front and rear
• Extremely detailed body with add-on parts
• Vehicle can be powered by 2-cell LiPo batteries (up to 30C)      
• Scale: 1:10
• Dimensions (L/W/H): 500x270x165 mm
• Weight: 2060g
• Wheelbase: 290mm
• Ground clearance: approx. 45mm
• Track width: 215mm front / 210mm rear
• Tires front/rear Ø: 110mm / Width: 45mm
• Damper oil: 400CPS
• Damper installation length: 80mm
• Motor ratio brushed version: Pinion: 21Z / Main gear: 77Z (48dp)
• Dessert Buggy "ADB1.4" Brushed Version
• 2.4GHz Remote Control CR2SV2
• Mini tool kit
• Instruction manual

1:10 Alu. Standard Dampers 55mm (2)absima

1:10 Alu. Standard Dampers 55mm (2)

Features:
Aluminum body
Total length: approx. 65mm
Mounting length: approx. 55mm
Total diameter: 16mm
Weight/pcs. (filled): 13g
Shock body color: red/copper
Spring color: black
Knurled screw for stepless adjustment
The shock absorbers are delivered oil filled with (100CPS)
  
 
 
Recommended for 1/10 cars like:
Touring (On-road) Cars, Drift Cars, Buggies, Truggies, (Monster) Trucks.
 
Scope of delivery: 
1 pair of shock absorbers

1:10 EP Monster Truck ""AMT3.4-V2 BL"" 4WD Brushless RTR ABSIMA

The success story continues! We have equipped the AMT3.4 "V2" with some new features that bring the vehicle to the next level of evolution.
      
 
Some technical changes have been implemented in our 1/10th scale Monster Truck - among other things, the vehicle now comes with LED lighting on the roof.
 

• NEW* 60A brushless speed controller with T connector and 3421KV motor
• NEW* Programmable speed controller
• NEW* 15 kg steering servo with metal gear
• NEW* LED lighting
• NEW* Monster Truck body with many add-on parts
• NEW* even more option parts available

 

 
 
 
 
The new 60A brushless speed controller is waterproof, programmable and pre-configured with a T-connector. To fully exploit the potential of the vehicle, we recommend a LiPo 2S/7.4V battery for operation. In addition, a separately available programming box (item 2110062) can be used to adjust various parameters such as braking force, punch, low-voltage protection and more.
 
 
The car is powered by a 3421KV brushless motor that directly accesses the all-wheel drive. The two differentials (front and rear) are driven by an aluminium drive shaft. A 15kg metal gear servo handles the conversion of the steering commands. 
The motor/controller unit can also be powered by a 3S/11.1V LiPo battery (note the size of the battery compartment!), but this increases the wear and tear on the vehicle extremely. Also the handling becomes almost impossible due to the enormous over-motorization. Therefore, we generally advise against 3S driving.

4 adjustable aluminum oil-pressure shock absorbers offer ideal handling, so that a lot of driving fun. The spring preload can be adjusted via a knurled screw. Thus, the chassis can be perfectly adapted to your needs.
 
      
Lightweight and compact design, as well as comfortable and ergonomically shaped - these are just two features of our CR4S 4-channel remote control. Of course, all trim, reverse and dual rate functions are available in the cockpit, making adjustments easy via levers and knobs. In addition, the remote control has a "Beginner Mode" (speed reduction by 50%) and is therefore ideal for pilots who do not yet have so much experience with the handling of such RC vehicles.
 
      

• 4WD all wheel drive
• 2.4GHz 4-channel radio system
• 60A brushless speed controller (waterproof; T plug; programmable)
• 3421KV brushless motor (sensorless; splash-proof)
• 15kg metal gear steering servo (25T; ball bearings) 
• 8 Aluminium oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outdrives
• Aluminium main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminium engine mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish Monster Truck body with add-on parts
• "Light-Weight" chassis (less weight - longer driving time)
• Many aluminum option parts available

 

• Scale: 1:10
• Dimensions (L/W/H): 425x300x200 mm
• Weight: 2090g
• Wheelbase: 270mm
• Ground clearance: approx. 45mm
• Track width: 250mm front/rear
• Wheels front/rear: Ø 116mm / Width: 57mm
• Shock absorber oil: 400CPS
• Shock absorber installation length: 100mm
• Motor ratio: 17T / main gear: 64T (module 0.6)  

 
 

• 1/10 Brushless Monster Truck "AMT3.4BLV2" RTR
• 2.4GHz CR4S radio
• Sticker sheet
• Manual

 

• 4 AA batteries for radio
• 7.4V/2S LiPo car battery
• Charger  (suitable for car battery)
• Programming box for individual settings of the speed controller

 
 
 
 

1:10 EP Truggy "AT3.4-V2 KIT" 4WD KIT ABSIMA

The success story continues! We have equipped the AT3.4 "V2" KIT with some new features that take the vehicle to the next evolutionary stage
      
Some technical changes have been made to our 1:10 Truggy - among other things, the vehicle now comes with LED lighting on the roof
 
 
 

• NEW* Body in new race design
• NEW* LED lighting
• NEW* Downforce rear wing
• NEW* even more tuning parts available

 
 
The KIT version is a kit that can be assembled with standard tools such as pliers and screwdrivers. Shock absorbers and gearbox units are already pre-assembled so that even children can build this vehicle under parental supervision. You can also decide for yourself which electronic components should be installed in the vehicle. The kit includes 2 gear units - a copper/plastic version with the gear ratio for brushed motors and a full metal version designed for a brushless drive. This means that there are no limits to the motorization.
 
   

• 4WD all-wheel drive
• 4 oil shock absorbers
• Ball bearing main drive
• Extremely durable composite plastic parts
• Steel differential outlets
• Aluminum main drive shaft with steel mounts
• Adjustable upper tie rods
• 5mm aluminum motor mount
• 6mm shock towers
• 2 differentials (front/rear)
• Stylish Truggy body with add-on parts
• "Light-Weight" chassis (less weight - longer driving time)
• Many aluminum tuning parts available

 

• Scale 1:10
• Dimensions (L/W/H): 405x325x165 mm
• Weight: 1180g
• Wheelbase: 270mm
• Ground clearance: approx. 35mm
• Track width: 270mm front/rear
• Wheels: Ø 105mm / width: 55mm
• Shock absorber oil: 400CPS
• Installation length of the shock absorbers: 90mm
• Gear ratio BRUSHED version: pinion: 18T / main gear: 64T (module 0.6)
• Gear ratio BRUSHLESS version: pinion: 23T / main gear: 64T (module 0.6)   

 

• 1/10 Truggy "AT3.4V2" KIT version
• Sticker sheet
• Manual

 

• Radio and receiver
• Speed controller and motor (brushed or brushless)
• Steering servo with 25T
• Drive battery (7.2V NiMH or 7.4V/2S LiPo battery)
• Charger (suitable for the drive battery)
• Programming card (optional for individual settings of the speed controller)
• 4* AA batteries for the remote control

1:10 EP Truggy "AT3.4-V2" 4WD RTR ABSIMA

1:10 EP Truggy "AT3.4KIT" 4WD KIT

1:10 Off-Road 4WD racing front rims 14mm white (2)

After a long time testing through our time drivers, finally ABSIMA is proud to present our 1:10 Aero Disc Competition Wheels!

Specially deisgned for competiton racing and made from the finest durable material we offer 4 different colors for everyone!

• 14mm Hex
• "Pro Flex" Material
• Ø 62 mm
• Width: 27mm
• Weight: 13g
• Application: 4WD front

Offset for Schumacher, Kyosho, TAE and Yokomo. For Team C cars a +1.75 hex offset is needed. For Xray the 14mm Xray hex +1,5mm is needed.

1:10 Screw set ABSIMA

• 10 x Set screw M3*3
• 10 x Set screw M3*10
• 10 x Countersunk screw M3*8
• 10 x Countersunk screw M3*10
• 10 x Countersunk screw M3*16
• 10 x Roundhead screw M3*8
• 10 x Roundhead screw M3*10
• 10 x Roundhead screw M3*12
• 10 x Roundhead screw M3*16
• 10 x Nuts M3  

1:16 EP BL Touring Car "FUN MAKER" neon genesis RTR ABSIMA

Our 1/16 touring car combines precision and performance in a compact and affordable model that can be taken anywhere and be ready for fun in no time!
This little powerhouse comes ready-to-run with (almost) everything you need to hit the track (only 2* AA batteries for the transmitter are needed). Whether you're racing with your friends in your backyard driveway, on the playground, in the office, or doing wild drifts in your living room, this little "fun maker" leaves nothing to be desired!
 
The chassis, with its powerful engine, all-wheel drive and independent suspension are just a few features that deliver impressive performance. In addition, the aluminum parts such as chassis plate, shock towers and shock absorbers which contribute to excellent rigidity and thus to the ultimate driving experience on smooth surfaces. This high-tech chassis keeps the center of gravity as low as possible to ensure a precise and responsive driving experience.
 
Short and sweet: This little powerhouse lies on the road like a board !
 
HIGHLIGHTS:

• Aluminum chassis for excellent handling characteristics
• Powered by a powerful 380 brushless motor
• High performance differentials on front and rear axle
• Independent suspension for exceptional handling
• Intricately designed, multi-piece bodyshell
• Speed: +/- 40 km/h

DESIGN:
 
The body with its aggressive design and very detailed shape is made of sturdy material to withstand impacts. It comes with a decal sheet including gluing instructions. Of course, you can also customize your sweetie or get an unpainted body (optional available - item 1610090) for a completely custom look. In addition, the engine dummy for the hood and of course the lighting front and rear complement the design.
     
     
 
CHASSIS PERFORMANCE:
 
Bling Bling! Already noble the design with the aluminum parts! Good looking, good performance!
Basically, the structure and arrangement of the components is like a 1:10 competition touring car:

• Independent suspension
• CVD front driveshafts
• Differentials with aluminum pinion gears (38Z) and pinion gears (14Z)
• Differential gears made of polyamide (12Z/24Z)
• Aluminum drive bones on rear axle
• Aluminum "big-bore" shock absorbers

Chassis, shock towers and upper deck made of aluminum not only give excellent stiffness. Due to the extra weight in contrast to carbon (which is used in high-quality 1:10 on-road chassis), the grip is increased here and thus the performance is increased. If that's not enough, you can treat yourself to fancy aluminum wheels (available as an option - item 1610092/1610093).
     
         
 
DRIVE UNIT:
 
a plenty of power for that scale!
Driven by a 380 brushless motor with 3300KV and a 30A receiver / speed controller unit with T-high current plug, one is already fast on the road and the insane torque provides for decent drifts! The motor is driven by a 16Z aluminum motor pinion (Mod.0.6 / 2.3mm motor shaft) and a 40Z main gear. If you ever want to change the gear ratio, please remember that the motor shaft has a diameter of 2.3mm. Accordingly, you must pay attention to this when buying the motor pinion. The firing is done by a 1500mAh 7.4V/2S LiPo battery. There is also a matching 20W/800mAh LiPo fast charger included
 
 
 

 
REMOTE CONTROL & STEERING:
 
A 2.4GHz remote control system is of course standard today! With our radio you also have the possibility to throttle the speed via a rotary control, if someone wants to take the control who is not yet so skilled. The steering takes over a fast steering servo with an actuating force of 2.2kg. This means that nothing stands in the way of the first drift attempts on smooth surfaces such as tiles or wooden floors.The optimal fun mobile for any smooth surface! 
      
 
FEATURES:

• 4WD All Wheel Drive
• 2.4GHz remote control
• Full ball bearing drive
• Aluminum chassis, upper deck and shock towers
• Aluminum "big bore" shock absorbers
• CVD axles on front axle
• Heavy duty front & rear differentials
• Aluminum propshaft
• LED lighting front & rear
• Extremely detailed body with sticker sheet

SPECIFICATION:

• Scale: 1:16
• Dimensions: (L/W/H): 310x140x80mm)
• Weight (without battery): 560gr
• Wheelbase: 175mm
• Ground clearance: approx. 6mm
• Track width: 110mm front / 115mm rear
• Wheels front/rear: Ø 50mm / Width: 18mm
• Damper filled: Yes (100CPS)
• Damper installation length: 38mm
• Motor ratio: pinion 16Z / main gear 40Z / module 0.6 (2.3mm motor shaft!)

INCLUDED:

• 1:16 Touring Car RTR
• 2.4GHz remote control
• 1500mAh LiPo battery
• 800mAh LiPo fast charger
• Sticker sheet
• Manual

      
REQUIRED ACCESSORIES:

• 2* AA batteries for remote control