SPECIAL COMBO: Including 2 receivers!!!
 
CPU Radios are every rc car or boat drivers dream! But whats your dream of? It's as much fuctions as possible, big display, stable transmission, nice design - but for an reasonable price! Here we go! Absima's CR3P!
 
Radio features:

• A.F.H.D.S. 2.4Ghz system
• 3-channel radio
• 2x 3-channel receiver
• 10 model memories
• Servo reverse
• Dual rate
• EPA
• EXP
• ABS

• 3-channel
• Water-resistant
• Failsave included
• Measurement:
• 35 x 21 x 12mm
• Weight: 11g 

Vigor High Grip Steering Pad for Sanwa & Futaba (Orange)

FEATURES:

• Channel: 6CH
• Radio size (L/W/H): 160x100x200mm
• Water-proof receiver
• Receiver size (L/W/H): 35x20x13mm
• Radio operating current: 80-120mA
• Receiver operating current: 30mA
• Radio voltage range: 4.8-12V (LiPo suitable)
• Receiver voltage range: 3.3-10V
• Stable distance control up to 200m

• CR6S 6-Channel Radio
• R6WP 6-Channel Receiver
• Manual (DE/EN/FR)

3M DUBBELZIJDIGE TAPE 40X40MM 5PS
GEMAKELIJK OM BV JE REGELAAR VAST TE PLAKKEN.
VERPAKT PER 5 STUKS.

e "CR4S" is a 4-channel remote control including 2 receivers, which uses the latest AFHDS 2.4GHz "ANT" frequency hopping technology from ABSIMA. 
 
Lightweight and compact design, as well as comfortable and ergonomic shape. In addition, the remote control has a "beginner mode" and is therefore also suitable for pilots with less experience and also children.
 
      
 
The included receivers have a very compact design with a size of 30.2*18.0*13.0mm and fit in almost every receiver box. 
 
      
 
FEATURES
    
Description of the channels (the transmitter has 4 channels which are assigned as follows):
CH1: Steering wheel
CH2: Throttle lever (Trigger)
CH3: 3-position toggle switch
CH4: Push button
 
Reverse function (REV): This function can be used to set the direction of rotation of the steering servo/motor.
 
Trimming (TRIM): Adjustment of the straight run and throttle neutral position.
 
Dual Rate function (D/R): The steering angle and also the motor rotation power can be increased or reduced by operating this rotary knobs.
 
Failsafe function: This function determines what the receiver should pass on if the signal to the transmitter is lost (e.g. emergency braking).
 
Beginner modus: This function is intended for newcomers. In this mode the motor power is automatically reduced to 50%.
 
      
 
SPECIFIKATION 
 
Radio CR4S:
Channels: 4
2.4GHz Protocol: ANT
Distance: >150m
Battery (not included): 4*AAA 1.5 - 6V DC
Low V Warning: <4.2V (only NiMH)
Using LiPo TX battery possible: Yes (only LiPos with built-in low V protection)
Charging interface: No
Antenna type: Single antenne
Temperatur range: -10°C - +60°C
Dimension (L(W/H): 150*100*210 mm
Weight: ca. 130 g
 
Receiver R4WP Micro (2020016):
Channels: 4
Antenna type: external single antenna
Waterproof: Yes
Power: 3.5-8.4V
Failsafe: Yes (in connection with radio)
Temperatur range: -10°C - +60°C
Weight: 5 g
Size: 30.2*18.0*13.0 mm
 
 
SET INCLUDES
 
1* 4-Channel radio "CR4S"
2* 4-Channel receivers
1* Antenna tube
1* Manual (DE/ENG/FR)
 

Technische details:
- Verkrijgbaar in 4 kleuren
- 3 kanaals ontvanger
- Geïntegreerde failsafe
- TAMIYA KIT gebruiksvriendelijk

Technische gegevens:
- Bedrijfsspanningszender 4,8 tot 6 V
- Twee traploos instelbare volledig proportionele kanalen
- Servo reverse voor beide kanalen (omkeren van de rijrichting)
- Trimfunctie voor gas en besturing
- Dual rate voor beide kanalen (servo limiet)
- Voeding van de ontvanger (zonder BEC) tot 11 V mogelijk
- Geïntegreerde fail-safe
- Uni-plug-systeem voor Futaba en Graupner-J/R
- Batterijstatusindicator via LED.

Leveromvan: 3-kanaals 2,4 GHz-zender, 3-kanaals 11 V mini-ontvanger en meertalige handleiding.

Veiligheidsaanbeveling: niet geschikt voor kinderen jonger dan 14 jaar. De verpakking moet worden bewaard, omdat deze belangrijke informatie bevat. De afbeeldingen kunnen afwijken van het product in het pakket. CARSON behoudt zich het recht voor om op elk moment verbeteringen en wijzigingen aan te brengen.

Let op! Niet geschikt voor kinderen onder de 14 jaar.

Carson nummer: 500100

EAN: 4005299501005

501514, Carson, ontvanger Reflex Pro 2,4 GHz BEC

Ontvanger Reflex Pro 2,4 GHz BEC

Carson nummer: 501514

EAN: 4005299515149

This set contains 1* CR7P radio and 2* R7FS receiver units
 
This remote control system uses the new 2.4 GHz ANT protocol - "enhanced automatic frequency hopping digital system", consisting of a CR7P transmitter and a R7FS receiver. 
There are 7 channels available. The system is ideally suited for crawlers, on-road cars, off-road cars, drift cars and boats.
The large 3,5 x 7,0cm DOT Matrix Display shows all selected parameters clearly.
 
FEATURES 
 
Description of the channels:
CH1: Steering wheel
CH2: Throttle (Trigger)
CH3: SW1 knob
CH4: SW2 knob
CH5: SW3 3-way switch
CH6: VR1 rotary switch
CH7: VR2 3-way toggle switch
 
5-way navigation button
5-way trim switch
New "ANT" 2.4GHz protocol
Various MIX functions (program mixer, dual motor mixer, 4-wheel steering mixer)
Supports 4* AA batteries or 2S LiPo battery as power supply
2-way data transmission
20 model memories
Beginner Mode
Timer / lap counter
Standard functions like REV / EPA / SUB TR / D/R and CURVE settings
Internal antenna
Calibration program
Lightweight and compact design weighing only 305g (without batteries)
Up to 300m range
 
SPECIFICATIONS
 
Remote control CR7P:
Frequency: 2.4GHz
Channels: 7
Model type: cars, boats
RF frequency 2.4GHz; ISM: 2.4G protocol ANT
Maximum power: <20 dBm (EIRP) (EU)
Receive sensitivity: ≤-99dBm
Channel resolution: 1024
Undervoltage warning: YES
Date output: PWM/PPM/i-BUS/S.BUS
Input power: 4-9 V/DC
Battery: 1.5 AA * 4 / 2S Lipo (JST)
Data output type: -C- interface
Charging interface: NO
Antenna type: Built-in single coaxial cable antenna
Display Mode 128*64 LCD (DOT matrix screen, backlit)
Distance: ≥300 m (ground)
Working current: approx. 110mA/6V
Temperature range: -10?~+60?
Humidity range: 20-90%
Size: 136.4 x 111.8 x 197.5mm
Weight: 305g
 
Receiver R7FS (2020017):
Model: R7FS
Frequency: 2.4GHz
Channels: 7
Waterproof: NO
RF Frequency: 2.4GHz ISM RF Standard: ANT
Input power: 3.5-9 V/DC
Weight: 8g
Size: 35*23,3*13,3mm 
 
INCLUDED IN THE SET
 
1* CR7P remote controller
2* R7FS receiver
1* Instruction manual (DE/ENG/FR)

• 3.5" large color touchscreen display with backlighting
• 9 channel (transmitter & receiver)
• 40 Model memories
• 5 Mix functions programmable
• GPS / Telemetry (optional)

 

• Voice assistant (English)
• 3,5" capative touch screen (480x320 color screen)
• Remote distance: 600m
• Optional GPS module
• 1S LiPo capable
• Mix functions
• 4-Wheel steering
• Dual ESC function (for Crawler)
• 180°/270° servo support
• Channel limit adjustable
• Trigger adjustable
• Spring tension (trigger/steering wheel) adjustable
• Display design and sound changeable
• Suitable for on-road cars, off-road cars, crawler, tanks, boats

 

• Channels: 9
• Frequency: 2.4GHz (2-Way Transmission)
• Frequency Hopping: FHSS
• Operating voltage: 3.5V-6.0V (1S LiPo / 4* AA Mignon)
• Battery compartment size (L/W/H): 100*50*18mm
• Power consumption: 260 - 400mAh
• Transmitter power: 100mW
• Temparature: -10°C - +60°C
• Weight: 320g
• Dimensions (H/W/D): 185x110x140mm 

 

• Channels: 9
• Connectors for GPS & Ext. Volt
• Waterproof and dustproof: IPX4
• Frequency: 2.4GHz
• Operating voltage: 3.5V-9.0V
• Weight: 8.3g
• Dimensions: 36.0x22.8x12.6mm

 

• CR9T 2.4GHz 9-Channel Radio
• R9GPS 2.4GHz 9-Channel Receiver
• Quick Start Manual DE/EN/FR
• Display protection foil
• Voltage sensor cable

• 4* AA Mignon batteries or 1* 1S LiPo battery (JR/FUT connection; Battery compartment size: 100*50*18mm)

• Optional*: 2020034 - GPS module
• Optional*: 2020036 - Display protection foil (pack of 3)
• Optional*: 2020023 - 9-channel RX 
• Optional*: 2020024 - 6-channel RX

AA/Mignon Premium Alkaline 1.5V LR06 4x

• No harmful substances such as mercury and cadmium
• Low self discharge
• Not rechargeable

Absima 2-kanal Fernsteuerung "cr2s.v2" 2.4ghz Inkl. 2 Empfänger

3-channel receiver suitable for CR2S(V2), CR3P and CR4T radio - Waterresistant.
 
Specification:

• 2.4Ghz A.F.H.D.S. system
• 3-channel
• Water-resistant 
• Failsafe function
• Measurement: 35 x 21 x 12mm
• Weight: 10g
• Voltage: 4,8V - 6,6V

 
CPU Radios are every rc car or boat drivers dream! But whats your dream of? It's as much fuctions as possible, big display, stable transmission, nice design - but for an reasonable price! Here we go! Absima's CR3P!
 
Radio features:

• A.F.H.D.S. 2.4Ghz system
• 3-channel radio
•  3-channel receiver
• 10 model memories
• Servo reverse
• Dual rate
• EPA
• EXP
• ABS

• 3-channel
• Water-resistant
• Failsave included
• Measurement:
• 35 x 21 x 12mm
• Weight: 11g 

Sponge for Steering Wheel

Beschermtas voor zender hardcase universeel

Deze hoogwaardige en schokbestendige beschermtas is geschikt voor vele R/C handzenders. Met zachte binnenbekleding en draagriem.
Geschikt voor veel populaire R/C handzenders zoals handzenders van Futaba, Graupner etc.

Producteigenschappen:
- Kleur: zwart
- Gewicht: ca. 380 g
- Afmetingen: ca. 260 x 260 x 110mm

Leveromvang:
- 1 zender beschermtas hardcase

Artikelnummer: 15284
EAN: 4013389079839

Pichler C5373 MASTER GigaProp 4 Set (Mode 1)

Modern 4-kanaals 2.4Ghz Fernsteuerset inclusief zender en ontvanger. Dit regelt uw R / C model veilig en betrouwbaar. Het moderne, slanke ontwerp maakt de zender aangenaam te raken voor kleine en grote handen.

Product kenmerken:
- 4-kanaals proportionele digitale afstandsbediening MODE 1 (gasknuppel rechts)
- De nieuwste 2,4 GHz transmissie technologie met korte antennes
- Op basis van betrouwbare technologie
- Volledige reikwijdte (Full Range System)
- Robuust, easy-grip kunststof behuizing in normale grootte (geen speelgoed)
- Non-slip, professioneel geanodiseerde aluminium stuurknuppel
- Echte frequentie hopping

MASTER zender GigaProp 4
- Digitale trims voor alle kanalen
- Geïntegreerde V-staart mixer (Delta mixer) schakelaar selecteerbaar
- Schakelaar voor servo draairichtingen
- Trainer boek (docent / student)
- Andere ontvangers kunnen worden herschikt op elk gewenst moment
- Alle commerciële servo's aangesloten (universal plug)
- Bedrijfsspanning 4.8V =
- Afmetingen (LxBxH) = 200 x 170 x 40mm
- Gewicht = ongeveer 375g

Receiver MASTER 6K
- Gewicht = 8g
- Afmetingen (LxBxH) = 45 x 23 x 9 / 13mm
- Bedrijfsspanning = 4,8 ... 6.0V
- Volledige dekking (Full Range System)

Levering:
1x zender MASTER GigaProp 4
1x ontvanger Master 6K
1x Binding plug
- Handleiding Duits, Engels

Optioneel (aanbevolen)
- Ontvanger MASTER 6K, # C8978
- MASTER Leraar / leerling-kabel, # C9020
- Flight Simulator Aansluitset voor PC / USB-poort, # C6099

Om de zender te bedienen zijn 4 stuks gewone AA batterijen of accu´s nodig nodig (niet inbegrepen).

Pichler nummer: C5373

EAN: 4056534002597

CARSON Accessoires Telemetrie Sensor Set voor Carson Reflex Wheel Ultimate Touch Afstandsbediening.

De CARSON telemetrie add-on/reserve set sensoren vult extra ontvangers aan of vervangt beschadigde sensoren.
Geschikt voor de REFLEX WHEEL Ultimate Touch telemetrie afstandsbediening Art-No. 500500516. De extra ontvanger is geregistreerd onder het Art-Nr.
500501529 beschikbaar.

Omvang van de levering:

• Snelheidssensor
• 1 temperatuursensor voor motor of snelheidsregelaar
• Batterijspanningssensor

enderset Reflex Wheel PRO3 2,4GHz

De Reflex Wheel Pro III is een innovatieve 2-kanaals RC systeem van Carson Model Sport. Het stuur en gas kanaal zijn naar wens instelbaar (dualrate). Hierdoor kan je elk model zeer subtiel instellen voor de baan waar je rijdt. Daarnaast kan het gas voor beginners en kinderen zo worden ingesteld dat de auto niet te snel is voor hen. Het chromen stuurwiel met rubberwiel, welk voor de nodige grip zorgt, geeft de stturcommando´s nauwkeurige door aan de ontvanger. De stuurunit kan afzonderlijk naar voren en naar achteren worden gekanteld. De meegeleverd ontvanger is ontworpen voor 11.1V. Daardoor kan het modelmet hoogstroom servo´s worden uitgerust.

Absoluut briljant, maar toch eenvoudig is de binding van de zender met de ontvanger:
1. Zet de ontvanger aan
2. Druk op de knop Setup
3. Zet de zender aan - DONE!

Aanbevolen accessoires:
Extra-ontvanger: C501533, C501536 en ook te gebruiken zijn 500,501,534.500501535
500609043 AA-batterijen Set (4) of C608153 3.7V 800mAh (LiPoaccu) of eneloop accu´s met lader 950061 voor de zender
Omvang van de levering:
2-kanaals zender 2,4 GHz micro-ontvanger en meertalige handleiding.

Technische details:
- Bedrijfsspanning zender 4,8-6 V
- Bediening met optionele LiPo-accu of 4x AA NiMh cellen mogelijk
- 2.4 GHz FHSS systeem (Frequency Hopping Spread Spectrum)
- Twee traploos volledig proportionele kanalen
- Servo reverse voor beide kanalen (omkeren van de richting)
- Trim-functie voor gas en besturing
- Dual rate voor beide kanalen (uitslag-beperking van de servo's)
- Voeding van de ontvanger (zonder BEC) is het mogelijk tot 11.1V
- Geïntegreerde fail-safe (programmeerbaar)
- Uni-stekkersysteem
- Oplaadaansluiting (positieve pool aan de binnenkant)
- Batterij LED status indicatie

Carson-Nr.: 500052

Carson SON Reflex Wheel Pro 2 Telemetry

The double sided tape which is widely regarded as the best type of tape in the industry, is now available in easy to use pads. Easily adheres electrics to chassis, this clear tape is now available in 25 x 20mm pads, 1 piece is perfect for most speed controls or receivers, with no waste.

Sticks extremely well and peels off in one piece with no residue.

25 x 20mm, 24 per pack. Approx. 1mm thick.

Eneloop AA 2000mAh Ve 4st.
De akku zonder zelfontlading

Technische specificaties:

• Accucapaciteit: 2000 mAh
• Spanning: 1.2 V
• Grootte: Penlite (AA)
• Technologie: NiMH
• Inhoud: 4 st.
• Afm.: (Ø x h) 14 mm x 50.5 mm
• Type: HR-3UTG 4BP
• Oplaadbaar: Ja

EAN: 4994334225030

Product information "Flysky FGr4D AFHDS3 Receiver 4CH"

The bidirectional FGr4D receiver is equipped with 4 channels and runs the AFHDS3 protocol. Thanks to the two built-in antennas and the compact design, there are numerous possible applications in the smallest of spaces. In addition to the four channels, the receiver also offers 5 functional interfaces that can be configured with different signal types such as i-BUS2, S.BUS, i-BUS and PPM. The FGr4D is also waterproof according to the PPX6 standard.

Technical Specifications

Product information "Flysky FGr4S AFHDS3 Receiver 4CH"

The FGr4S receiver is the ideal support when using a Flysky remote control. The receiver makes use of a technology used by several Flysky transmitters - the automatic frequency hopping digital system (short: AFHDS3). With a bidirectional transmission system via the antenna, this receiver is specially designed for the installation and output of PWM/PPM/i-BUS and S.BUS signals. All AFHDS3-capable transmitters are supported.

Technical Specifications

The FS-GT2F is a simple 2-channel 2.4GHz transmitter and it is ideal for getting started with controlling RC car models and boats. The transmitter runs on the AFHDS2A protocol and the remote control comes with a built-in antenna. It can also be easily connected to the computer via the micro USB port so that the radio can be used, for example, as a controller in games or simulation programs.*

Features:

• AFHDS 2A
• Multi-channel hopping frequency
• Multidirectional antenna with amplification
• Unique ID recognition system
• Low energy consumption
• Automatic setting of 1 or 2-way communication
• Reliable communication even over longer distances

Technical Specifications:

Delivery:

• FlySky GT2F transmitter
• 1x receiver: FS-A3
• Manuals

Product information "Flysky Noble NB4 with 2 Receiver"

With the NB4 radio remote control from FlySky, driving an RC car or boat offers as much comfort as it offers technical specifications. After all, the remote control uses the new and extremely flexible AFHDS3 protocol for transmission while being ergonomically design.

In combination with this protocol, the advantages of a wireless WS2A system and the new 2.4GHz chip, a wide variety of transmitter parameters can be set dynamically. This includes channel number, channel resolution, range, anti-interference requirements and also latency. This makes it possible to freely adjust the transmitter to Your own needs via the 3.5 inch TFT display. The real-time data exchange between the transmitter and the receiver also enables increased control over the flight model with constantly updated information on temperature and speed, for example.

Features:

• Advanced and modern radio
• Ergonomic design with turnable wheel
• Suitable for both right and left handers
• Dual Battery System
• Intelligent RF configuration
• Less than 3ms latency
• Also suited for simulators and games without using an external dongle via USB

Technical Specificatons:

Delivery:

• FlySky "NB4" Transmitter
• Reveiver: FGr4 and FGr4S
• USB data cable
• Grip shell
• Springs (S, L)
• 2x transparent protection sticker
• Manuals

Product information "Flysky Noble NB4-Pro with 2 Receiver"

The Noble Pro breaks traditional standards with new ideas and offers extensive setting options for racers, crawlers and other RC vehicles. This 18CH transmitter with 7 channel modes is ideal for any terrain and shows top performance even in the most difficult situations. In addition, the new 2CH "Extreme Mode" with a new frequency algorithm ensures unimagined performance with only little delay.

The most striking feature of the FlySky Noble Pro is the holder for smartphones and the steering wheel, the position of which can be changed so that both left and right-handers can get the best out of their vehicle all the same. Together with the comfortable shape of the handle, this is definitely an extremely ergonomic transmitter overall.

Features:

• Set consisting of over 20 parts such as transmitter, 2x receiver, case and much more
• Ideal for any off-road use, whether on-road, off-road or on the water
• 5 mixing setting options and speed segmentation for optimal adaptation to every riding requirement
• And three built-in high-performance chips for great performance
• Variety of structural personalization options (e.g. different throttle levers, springs, steering wheels, ... )
• Suitable for both right and left handers
• With 4 PWM and 8 PWM receivers as required
• Including 2 exchangeable batteries for 8 hours of action each
• Wireless charging station for convenient energy refueling
• Easy to use touch menu

Technical Specifications Transmitter:

Technical Specifications Receivers:

Delivery:

• FlySky "Noble Pro" transmitter
• Receivers: FGr4B and FGr8B
• Hard case including key
• USB data cable
• Wireless charging station
• Grip shell (XL)
• Wrist strap
• Steering wheel and sponge (L)
• 1.5mm and 2.5mm wrench
• Brake pad set
• Thread adjusting screw
• Knob
• Springs (S, L)
• Throttle (S, L, Plastic)
• Back & angle bracket
• Sticker (company logo, various)

•  Do you have any questions concerning this product?

De FlySky Noble NB4+ is een krachtige afstandsbediening met veel mogelijkheden voor RC auto en boot toepassingen.
Uitgerust met de derde generatie 2,4 GHz AFHDS-3 protocol en in combinatie met de meegeleverde FGr4B ontvanger, is de NB4+ een moderne oplossing die ook geschikt is voor gebruik in leraar-leerling situaties.
De eenvoudige bediening en duidelijke menunavigatie via het touchscreen maken het zelfs voor beginners gemakkelijk om te beginnen met het besturen van op afstand bestuurde modellen.

Kenmerken:

• Geavanceerde, moderne zender
• Uitgebreide leraar-leerling functie inbegrepen
• Ergonomisch ontwerp met draaibaar stuurwiel
• Geschikt voor rechts- en linkshandigen
• Dubbel batterijsysteem
• Intelligente RF-configuratie
• Lage latentie
• Kan ook worden gebruikt in simulaties etc. Toepassingen (standaard geactiveerd)

Technische gegevens:

Zender

• Type: 2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Kanalen:8
• RC modellen:Auto, boot
• Afstand: >300m (grond)
• Kanaalresolutie: 4096
• Batterij:- 1S / (4.2V) x 4300mAh LiPo
• - 3450mAh 18650 batterij
• Waarschuwing laag voltage: < 3.65V
• Type antenne: Externe enkele antenne
• Beeldscherm: 3,5-inch IPS aanraakscherm, resolutie 320x480px
• Oplaadinterface: USB-C
• Gegevensinterface: USB-C
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidsbereik:20% tot 95%
• Online update:Ja
• Abmessungen:131,41x115,95x190,56mm
• Gewicht:520g

OntvangerFGr4B

• PWM:4
• Type:2,4GHz ISM
• Frequentieprotocol:AFHDS 3
• Geschikte zenders:Alle zenders met AFHDS3 ondersteuning
• Antennetype: Enkele antenne
• Spanning:3.5-9V
• Gegevensinterface: PWM/PPM/i-BUS2/S.BUS/i-BUS
• Temperatuurbereik:-10°C tot +60°C
• Vochtigheidswaaier: 20% aan 95%
• Online update: Ja
• Abmessungen:17x29x16,6mm
• Gewicht: 6.4g

Omvang van de levering

• FlySky "NB4+" zender
• Ontvanger: FGr4B en kabel
• USB-gegevenskabel
• Greepschaal (S, L)
• Veren (S, L)
• Reserve gashendel
• 2x transparante beschermfolie
• Gebruiksaanwijzing

Product information "Flysky Noble NB4-Pro+ with 2 Receiver"

The FlySky Noble NB4 Pro+ is the most powerful model in the NB4 series. In addition to high-quality craftsmanship and modern design, the NB4 Pro+ also impresses with top performance. The remote control is equipped with the third-generation 2.4 GHz AFHDS 3 protocol, enabling extremely low latency and precise control. The new interface makes it easy to operate, even for beginners, and offers plenty of room for optional configurations.

The transmitter features an ultra-fast 2-channel mode that ensures low latency, allowing users precise control even in the most hair-raising moments. The 3.5-inch display has been significantly improved compared to its predecessor and now boasts a powerful contrast and brightness, making the NB4 Pro+ ideal for outdoor use. Additionally, a USB-C input, a better battery, and a dual battery system are new.

The NB4 Pro+ comes in a high-quality PVC case with two receivers, just like its predecessor.

Features:

• Advanced, modern transmitter
• Includes trainer-student function
• Compatible with all iBUS2 devices and some Hobbywing products (e.g., Xerun AXE R2 ESC)
• Freely customizable channels
• Ergonomic design with swivel wheel
• Suitable for both right- and left-handed users
• Dual battery system
• Intelligent RF configuration
• Low latency
• Also usable in simulations and similar applications (enabled by default)

Package Contents:

• FlySky "NB4 Pro+" Transmitter
• Receiver: FGr4B and Cable
• Receiver: FGr8B and Cable
• Hard case including key
• CNC Steering Wheel
• USB-C Cable
• Grip Shell (S, L)
• Spare Throttle Lever
• Manual

Product information "Flysky R4P ANT Receiver 4CH"

The R4P receiver is the ideal partner when using a Flysky remote control and is specially designed for the installation and output of PWM signals. Therefore it is supported by all ANT-capable transmitters.

Technical Specifications

FS Reflex X1 zenderset 2-Kanaal 2,4 GHz

- 2 regelbare kanalen
- Inclusief oplaadbus voor de akku´s in de zender
- 4-kanaals mini- ontvanger

Technische gegevens:
- Bedrijfsspanning zender 4,8-6 V
- 2,4 GHz FHSS systeem (Frequency Hopping Spread Spectrum)
- Twee traploos en volledig proportionele kanalen
- Servo reverse voor beide kanalen (omkering van de servorichting)
- Trim-functie voor gas en sturen
- Dual Rate voor beide kanalen (beperking van de servouitslag)
- Voeding van de BEC-ontvanger via een rijaccu met 4,8-7,2 V mogelijk
- Failsafe programmeerbaar
- Stekker-systeem voor Futaba en Graupner J / R
- Zender laadbaar via bus aan de zender (positief binnen)
- Batterij of accu niveau controleerbaar via LED´s op de zender.
- 4-kanaals mini-ontvanger 36x25x15 mm

leveromvang:
2-kanaals 2,4 GHz zender, 4 kanaals 2,4 GHz- ontvanger en een meertalige handleiding.

Benodigde accessoires:
Penlite´s (AA) 950060

Carson nummer: 500148

EAN: 4005299005916

Reserve ontvangers:
Artikelnummer: C501533 ontvanger van de set (500148).
Artikelnummer: C501534 ontvanger waterdicht.

Futaba R404SBS (SR/T-FHSS/S.Bus2) Receiver

Hiro Seiko Steering Sponge (Big)

Specifications:

Optional LiPo battery for the SANWA M17 radio. 6000mah compared to the standard 2500mah supplied in the radio.

Specifications:

KoPropo Steering Sponge

KoPropo Steering Sponge Hard

LRP VTEC LiPo 2700 RX-Pack 2/3 Hump - RX-only - 7.4V

LRP XTEC RX-pack Hump 2/3A NiMH - BEC - 6.0V - 1600mAh

LRP XTEC RX-pack Hump 2/3A NiMH - JR - 6.0V - 1600mAh

MASTER GigaProp 6 Set (Mode 2 + 4)

De telemetrie 6-kanaals afstandsbediening MASTER GigaProp 6 wordt gekenmerkt door zijn gebruiksgemak en heeft diverse instellingen voor b.v. electronische mixer en speciale programma´s. Het grote, hoog display kan eenvoudig worden afgelezen, zelfs in fel zonlicht. De zender is zeer smal (slechts 40 mm) en ligt dus goed in de hand.

bestek
- Radio systeem: 2.4Ghz
- 6 Kanalen
- Telemetrie: geïntegreerd (optionele sensors, zie onder "Speciale toebehoren")

MASTER zender GigaProp 6
- 6 Kanalen
- Zendvermogen: <20 dBm
- RF kanalen: 140
- Bandbreedte: 500kHz
- Resolutie: 4096 stappen
- Alarm niveau als de accuspanning <4.2V
- Gewicht zender. ongeveer 405g
- Afmetingen zender: 200 x 170 x 40mm
- Scherm afmetingen: 73 x 39mm, 128 x 64 pixels
- Model geheugen: 20
- Trim: Digital
- Display: LCD / STN Transflectief achtergrondverlichting
- Spanning: 6V DC 1.5AA x4 (NiMH of alkaline, niet meegeleverd)
- Behuizing: stevig ABS
- Sender software: te updaten
- Sticks: aluminium, in lengte verstelbaar
- Stick Mode: Zelfs met terugwerkende kracht van mode 2/4 (gas links) naar mode 1/3 (gas rechts) ombouwbaar

Ontvanger MASTER 6K Telemetrie
- 6 Kanalen
- Afmetingen (L / B / H): 48 x 26 x 10 / 15mm
- Gewicht: 14g
- RF Gevoeligheid: -105dBm
- Bedrijfsspanning: 4,0 .. 6.5V DC
- Resolutie: 1024 stappen

Leveromvang:
- 1x zender MASTER GigaProp 6
- 1x Receiver MASTER 6K Telemetrie
- Binding plug
- USB-aansluitkabel
- Handleiding Duits, Engels

optionele accessoires
- NiMH-accu 1,2V 2550mAh, 950010
- Spanning sensor (tot 100V), C8960
- Temperatuur sensor (tot 250 ° C), C8959
- RPM sensor optisch (. 60.000 omw./min) C8958
- RPM sensor magnetisch (. 60.000 omw./min) C8957
- Vario-sensor, C9024
- IBus module, C8961

- Ontvanger MASTER 6K Telemetrie, C8962
- Leraar / leerling-kabel, C9020
- Flight Simulator Aansluitset voor PC / USB-poort, C6099

Om de zender te bedienen zijn 4 stuks gewone AA batterijen nodig of 4x NiMh 1,2V 2550mAh (niet inbegrepen).

Pichler nummer: C8802

 Specification:

• 2.4Ghz A.F.H.D.S. system
• 3-channel
• Failsafe function
• Measurement: 35 x 21 x 12mm
• Weight: 10g
• Voltage: 4,8V - 6,6V

ORCA Non-polarity noise killer 10V

propo neck strap black

Ruddog 3200mAh 3.7V MT-44 MT-5 LiPo TX Battery

Ruddog Products' new TX battery is the perfect choice for your Sanwa M-17. The 1S battery can be charged with standard LiPo chargers. With a capacity of 5200 mAh, the battery caters for the requirements of Sanwa's power hungry top-of-the-line radio and will last throughout a long day of racing.

Specifications: